Error code: 220602 - Nintendo Wii Console

Looks like you might need to set the DNS in the Wii to that of the router.

Hello there!

There are a couple possible options to fix your problem that may work:

• Temporarily disabling WEP encryption on the router.
• Set up another internet connection profile on the Wii (w/o encryption key)
• Select the User Agreement on the Wii.
• Re-set the WEP encryption key on the router.
• Switch back to the internet connection profile on the Wii (w/encryption).

I would try all of these and hopefully your problems will not persist. Good luck!

Try these steps:

• Temporarily disabling WEP encryption on the router.
• Set up another internet connection profile on the Wii (w/o encryption key)
• Select the User Agreement on the Wii.
• Re-set the WEP encryption key on the router.
• Switch back to the internet connection profile on the Wii (w/encryption).

Sorry to hear your having issues with your wii internet. One solution you can try is to:
Disable encryption on your router. Set up a new wireless network profile on your wii and then connect to it and do not use encryption. Accept the user agreement when it pops up. Then set up the encryption again on your router and try to connect using the encryption key.

the answer is right here

http://www.nintendo.com/consumer/wfc/en_na/ds/results.jsp?error_code=220602&system=Wii&locale=lang

These errors indicate a problem with the Internet Settings entered into the Wii. Try the following: Use the Manual Settings (rather than Search for an Access Point) to set up your Internet Settings on the Wii.
click here to download repair guide if u need

1.Unplug all off your devices starting with the wii then your linksys router.

2. On the router unplug the connections on the back ports then reconnect them "port connections first then power connections second"

3. Go to the wireless connection screen and do a network test on the Wii.

4.If that doesn't work then you have to go into the router itself through its ip address and redo the settings to make sure you have the connection to the router unblocked.

I hope that helps

Rad

220602 means there is a problem with the internet settings.

when entering your setting use manual settings to set up. manually entering the DNS settings when the screen comes up.
(note: errror code 32002 means the same thing)

mmmmmm