Question about DISH Network 322 DTV Receiver

1 Answer

I was watching t.v. my grandson called then i looked at the t.v. and it said no signal. i have tried unplugging it and turning it back on. i have changed the batteries in the remote control. nothing works. i have tried pushing the menue botton. nothing. does it sound like the problem is my remote control? i have dishnetwork and a vizio t.v.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 374 Answers

This seems to be due to the TV being on the wrong input. Use your Vizio remote and cycle through the inputs until you reach the audio inputs. Try all of them with the receiver on and the amber,green and blue lights on the receiver. If you do not see a picture here the TV may have been connected by coax. To check this go to th TV input using your Vizio remote and key in 03 or 003. You should be able to see satellite now. It will also depend on how your system is a connected to your peripherals if you have any connected.

Hope this solves your issue. Thanks for using FixYa.com.

Posted on Oct 14, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No signal/low signal


Unplug your router and unplug your cable modem,Turn your cable modem back on and wait for the lights to stop flashing.The plug your router back into your cable modem.Once the router lights stop blinking try to connect.If you still have a weak signal call your cable provider and ask them to reboot your cable modem at their end.

Apr 10, 2014 | NetGear Computers & Internet

1 Answer

My lap to is getting a signal , my grandsone ipad is getting signal but not the tv ?


WIFI signal on TV not working, go to settings, re-establish wifi password after completing wifi search, sometimes it can be as simple as powering off TV at the wall and unplug for two to three minutes, do the same for wifi access point, power both back on and try again.

Nov 30, 2013 | Televison & Video

1 Answer

Toshiba tv 40rv525u has started to change channels


My TV 40RV525U changing channels, menus itself for few months ( I use antenna).
my son tried to stop the channel scrolling by enter weird number into the channel to stop it scrolling such as 555, 777..
later, it turn on off by itself and unable to hold on a channel
I call Toshiba customer service and they ask money $25 for troubleshooting but I denied since I do not want to waste money and time.

Now, I found how to fix it myself.

In my case, something was wrong with the signal comes from the button control on the left side of the TV.
========================
What I did
========================
unplug the power cord.
Remove back cover.
Look into the motherboard ( biggest green at the center).

First, I disconnect a connector on the motherboard come from the IR board that receive the wireless signal control ( meaning the remote is disable).
I turn on the TV, press on Menu button on the TV side. Menu is still scrolling.

I turn off TV, disconnect power cord and connect the IR connector back to the motherboard.
I then disconnect the nearby connector that comes from the side control buttons.

Turn on the TV by remote, press menu button on the remote to check. The menu stays.

DONE.

I use electric tape to seal off the connector and let it hanging there.
Close the TV back panel

I have been watching TV for 3 nights without menus/channels scrolling.
NO AVAILABLE red message when watching DVD is no longer existed.

Hope this help someone else.

Jan 20, 2012 | Toshiba 40RV525U 40 in. LCD TV

1 Answer

My grandson was watching an old VHS tape and pushed something. Now, all I see when I turn the t.v. on is "counter00.00" and then the t.v. shuts off in about 3 seconds. I have lost the owners manual. HELP!


Left up the VCR tape gate,see,if the tape still in there?Yes,unplug,10 mins.replug the Tv and push the tape forward botton.Let the tape go forward about 5 sec. eject the tape take out.Grandson probally rewind the same seen to many times,causing power power shotdown mode.

Aug 09, 2010 | Symphonic SC3813 13 in. TV/VCR Combo

2 Answers

Battery missing


mcdevito75 here, Best Bet, look for a small watch repair shop in your area for that battery. On line you can also visit Jewelery Supply.com I didn"e see any batteries for your watch though, you can also call them at 916-780-9610 Extn. 5

Jul 09, 2010 | Skagen Watch

1 Answer

While watching tv on our new 42in.lcd flat screen and hooked up to our new hd cable box from comcast there are intermitent total signal losses from 3-5 seconds . Tv says searching for signal for a few...


yes we have to do a process of elimination to fix or narrow the problem down. try another box and see the results.if box work on another tv then u have tv problem

Aug 17, 2009 | Polaroid FLM-2632 Television

1 Answer

My grandson is trying to hook up a wii to a tv that only has coaxial signal input. We are using a phillips RF modulator but the only thing that happens is that we get snowie static on both chanels 3 and 4.


Look on the back of the modulator to see what chanel is selected. Also when it is working right when you turn on th Wii a light on the modulator will come on. So make sure all the wires are hooked up right and the Wii, Tv and modulator are plugged in.

Jan 11, 2009 | Nintendo Wii Console

1 Answer

My tv says no signal and all the rest in the home are fine


try checking all the chals first, if that does not work call your provider, or if you have an antena try ajusting it.

sarry for the typos but I have to go some were.

Aug 17, 2008 | Polaroid Televison & Video

2 Answers

Can't see movie


hi the remote isnt the problem check the connections from the deck to the TV the little angle probably pulled a couple of pluges back there or something like that... very dangerous by the way he can get electrocuted!! have a good one

Feb 19, 2006 | GPX DV7500 System

Not finding what you are looking for?
DISH Network 322 DTV Receiver Logo

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

S. Gontko

Level 2 Expert

142 Answers

john milligan

Level 3 Expert

514 Answers

Jaime Hernandez

Level 3 Expert

2318 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...