Question about GE JASRM24912 Remote Control

2 Answers

Universal Remote My mother bought a Universal Remote - URC-5063B04 and threw away the manual. The back of the remote says to hold the "setup" button until the red light blinks 2 times and then key in the 3 digit set up code. (which we do not have). Any suggestions?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a tv dvd combo emerson brand i have the tv working but i need the code for the dvd can anyone help

Posted on Nov 02, 2009

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • GE Master
  • 13,433 Answers

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Reprogram the URC-9910 universal remote for VIZIO E3D420VX


Universal remote code to check with Vizio TV is [0081.
Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand. If you want to get more details and codes to different remote controls, check this.

Dec 30, 2012 | One For All URC-9910 LCD Remote Control

Tip

Programming Philips Universal Remote Control To Your Device


Hi,

Program the Device by Entering Direct Codes

1.Turn all of your devices off, and then manually turn on the device you want to program.

2. Press the Setup button on your the universal remote and continue to hold it down until the indicator light stops flashing and remains solid.

3. Release the Setup button

4. Press the button to which you want to programme(TV/VCD/DVD).

5. Release it immediately and make sure the indicator light is illuminated.

6.Enter the first possible four-digit code on the universal remote, and then press another button on the remote to see if the device is now programmed, such as the volume control or power button.

7. If the device responds, you have successfully programmed your Philips universal remote.

8. If the remote is not programmed then, turn the device off and back on and follow the steps again using the next code on the list. Repeat until the device successfully responds.

How to Program a Remote Using Code Search

1. Turn all of your devices off, and then manually turn on the device you want to program.

2. Press the Setup button on your the universal remote and continue to hold it down until the indicator light stops flashing and remains solid.


3. Release the Setup button

4. Press the button to which you want to programme(TV/VCD/DVD).

5. Release it immediately and make sure the indicator light is illuminated.

6. Press either the Channel button or the Play button until the device responds. Each time you press the button, the Philips universal remote tries a new code.

7. When the code works, press the Mute button on the Philips universal remote and the code will be stored.

To Get The Programming Codes :

Please go to below website to get the codes to programme your remote.

http://www.urc.philips.com/

Please select the below informations.

1. Location
2. Select your remote model.
3. On your left side you will have an option called as REMOTE CONTROL CODE FINDER.

Attached a image for your reference:
e95ef87.jpg

4. Select the device you need to programme and the make of the device you will get the codes for your device.

Thank you

on Jul 27, 2010 | Remote Controls

2 Answers

I have a Quantum FX REM-200 remote that lost connection to my Toshiba tv. I dont have manual to help input codes i find. HELP!


Codes to check with Toshiba TV are: 0159 0178 0109 0120 0181 0105 0049 0095 0170 0260 0358 0394 0924 0012 0095 0117 0141

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.

Aug 16, 2012 | Universal Remote Control URC-200 LCD...

4 Answers

How to configure UET-606 Universal remote for NIKAI LCD TV?


Get the UET-606 Remote

1. Make sure its switched on
2. Point the UET-606 Remote towards the TV
3. Press the SET + TV button at the same time - the Red LED on Power will Illuminated solid Red
4. Press the SET Button again while still holding the TV button
5. the Power LED will begin to blink red
6 Enter the code 136
7. Press the Red Power button several times [sometimes 60 times] until the TV set resets itself
8. if the TV resets itself - point the remote away from the TV set and press any button or the SET button until the Power LED stops blinking
9. you are now ready to go

Aug 20, 2011 | One For All URC 7740 Remote Control

2 Answers

How can I get the 3-digit device code for a Sanyo TV Set? I lost the list!!


Hello
Three digit universal remote code for Sanyo are:
004/ 013/ 049/ 108/ 110/ 180/ 209

Four digit universal remote codes for Sanyo are:
0049 0097 0110 0004 0268 0012 0108 0180

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Most users will want to store VCR codes under the VCR button, Cable codes under CBL, etc. If you want to store a VCR code under CBL, etc., first follow the procedure for Direct Code Entry and press CBL in step 2 of Direct Code Entry, then enter ANY VCR code in step 3 of Direct Code Entry. Then follow the steps above for Code Search.
OK.

Feb 20, 2011 | Universal Remote Control Remote Control

1 Answer

Bought universal phillips remote to replace broken one and can't find code for Daenyx


couldnt find the type of tv you have but i found something that might help you can try these

0005, 0017, 0047, 0050, 0062, 0103, 0146, 0156, 0486, 0237
or you can try doing a code search with the remote below is how to do it

Manually turn on the device (TV, VCR, etc.) to be
controlled.
2. Press and hold the CODE SEARCH button until the
red indicator stays on, then release the CODE
SEARCH button.
3. Press and quickly release the desired mode button
(TV, VCR, etc.). The red indicator blinks off once.
4. Press the CHANNEL UP button repeatedly (up to
300 times) until the device to be controlled changes
channel. The red indicator blinks off with each
button press. If you accidentally overshoot the
code required, press the CHANNEL DOWN button
to backtrack through the library until the device
changes channel. Pressing CHANNEL UP changes
direction to forward again.
5. Press and release MUTE to install the code.

May 29, 2009 | Universal Remote Control URC-6131N Remote...

2 Answers

A I NEED THAT MANUAL 4 RCR312W i cant find it any where


http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

If none of the codes work then we have two other solutions:

1. Searching For Your Code

If you have tried all of the set-up codes for your brand of equipment ,or yourbrand is not listed, and you are still not able to get the unit to respond, trythe following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when youreach the end of all the codes for this device type.
  1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. ENTER 9-9-1 (two blinks on the remote)
  4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
    Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
  5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

2. Learn the buttons from the original

Line up your original remote and the head-to-head before completing thefollowing steps.
  1. PRESS and HOLD the SETUP button until the red LED flashes twice.
  2. PRESS 9 - 7 - 5, the red LED will flash twice.
  3. PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
  4. PRESS the button that will receive the learned function, the LED will flash rapidly.
  5. PRESS the button on the original remote to be learned.

Now you can repeat steps 3 through 5 to learn other functions onto other keysor press and hold SETUP until the Cinema's red light flashes twice to lock inyour new feature. (If the red light does not blink twice, stop and repeat stepsthrough 6).
To test the new feature, press and release the device key in which the newfeature was learned followed by the key on which the feature was learned

More help for programming your remote can be found here:
http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device

Hope that helps! Should you have any further questions,please feel free to post them here.
Television Video - DVD Audio Satellite Set Top Box Video - VCR Brand: Model (optional): clip_image001.gifclip_image001.gifWe could not find an exact match, we think this code will work. 10054 clip_image001.gifclip_image001.gifSetup Instructions
· Set the "Mode Switch" to TV.
· Press and hold the "Mute" button and the "Select" button until the visible LED blinks twice.
· Enter the 5 digit Code above.
· Try your new code and tell us how it worked!
You'll have to settle for that, use the middle power key in the tv device to power on & off the tv.


hope this may help;

Regards,
VOTIT

DON'T FORGET TO RATE;

Aug 10, 2008 | RCA Universal Remote Control

4 Answers

Small universal remote control 'TOTAL control' brand


I downloaded the complete user manual for free at Forum: www.remotecentral.com

Mar 14, 2008 | Remote Controls

5 Answers

Urc 11-2082 B00


For the remote URC2082 you can set a code manually by doing the following. Make sure the appliance is on, aim the total remote at it and hold setup untill red light flashes twice, type 9 9 1 and it should flash twice again. Press power and then press channel + until appliance switches of, as soon as this happens press setup and the light will flash twice again. This will store the code and can be used on everything I've tried so far.

Jan 07, 2008 | Universal Remote Control DIRECTV Universal...

Not finding what you are looking for?
GE JASRM24912 Remote Control Logo

172 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Remote Controls Experts

The Knight
The Knight

Level 3 Expert

68301 Answers

Cindy Wells

Level 3 Expert

4757 Answers

Peggy Cook
Peggy Cook

Level 1 Expert

7 Answers

Are you a GE Remote Control Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...