Question about NetGear ReadyNas Computers & Internet

Open Question

I have a NetGear ReadyNAS 1100 with 2TB of space(4x500GB). Two of the Disk LED lights on the front panel stop flashing. Changed out drives with new ones. Logged into browser, and it said that disk two and three are not available. Tried to just RESET device to factory defaults. It won't reset, but now I see the device with same IP but the passwords(default and the one I set for admin) won't work. So now I can't log into the device to see anything. What is another way to reset device to factory defaults.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: how to reset VSX 8000 to factory default - Forgot the password

RTFM!!!
section 8, page 4

System -> Diagnostics -> Reset system
you will need serial number for this

good luck.

Posted on Jun 04, 2009

Ad
  • 89 Answers

SOURCE: I have a ReadyNas NV+ , I can't access

Try using the RAIDar utility again to see if all is working. Can be downloaded from downloads on ReadyNas.com. You may need to call Netgear for support.

Posted on Jul 23, 2009

  • 96 Answers

SOURCE: D-Link 615 Default password not working.

Your default admin password should also be blank.

-Comp Doctor

Posted on Feb 01, 2010

  • 8 Answers

SOURCE: Is there any other way to reset the default

If you isp is Consoidated Communication

username admin
password cciadmin

Posted on Feb 19, 2010

sandman357
  • 236 Answers

SOURCE: i cant login to netgear routor with

check behind the router or in the manual. some have different passwords.

Posted on Feb 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a new netgear72 router how do i find password


For most NETGEAR devices (except ReadyNAS/ReadyDATA products and Fully Managed Switches), the default username and password is:

  • Username (all models) = admin
  • Password (current models) = password
  • Password (very old models) = 1234


Default username and password for ReadyNAS/ReadyDATA products:

  • Username (all models) = admin
  • Password (ReadyNAS OS and ReadyDATA OS) = password
  • Password (RAIDiator firmware) = netgear1
  • Password (Infrant firmware) = infrant1


Default username and password for NETGEAR fully managed switches:

  • Username = admin
  • Password is blank (no need to enter any password).

May 02, 2016 | Computers & Internet

Tip

How to setup your Readynas to telnet mode


Steps on how to set your Readynas to telnet mode.
note : this is only for desktop type of Readynas

1. Turn off the nas
2. Get a pen or a paper clip that will fit on the reset button.
3. Hold the reset button while the power is off.
4. Turn on the Readynas after 30secs but still holding the reset button
5. You will only release the reset button after the 3rd blink on the drive lights.

test telnet by going to the dos prompt.
Click start run, cmd,.
Type telnet ip address of your Readynas.

you can also use a 3rd party software like putty

on Jul 04, 2010 | NetGear ReadyNAS Duo RND2150 NAS server...

1 Answer

Why doesn't my neotv netgear remote no longer communicating with box?


What do the different Remote control front LED lights mean?
  • Blink blue color twice per second: Remote control has paired NeoTV PRIME and is trying to connect NeoTV PRIME.
  • Blink blue color once per second: Remote control is trying to pair the NeoTV PRIME.
  • Orange blinking: Remote control battery is low. Please replace a new set of AAA battery.
go to page 15 of the following document:

http://www.netgear.com/landing/stream/img/gtv-specs/GTV100_IG_25Oct2012.pdf

Sep 09, 2014 | Computers & Internet

1 Answer

The front LED flashes red & blue when I turn it on. What does this mean?


LED Indicators - LaCie 2big Network
The LED indicators above the drive bays and the front LED indicate drive status and activity.
During Startup
  • Front LED – blinks red/blue until both disks are powered on, then turns solid blue.
  • Rear LEDs – blinks red/blue until corresponding disk is powered on, then turns solid blue.
NOTE: If the device is not able to initiate the boot process following disk startup, the front is solid red.
During Bootup
  • Front LED – solid blue
  • Rear LEDs – solid blue
NOTE: If a disk is failing, both the disk’s corresponding rear LED and the front LED will be solid red.
During RAID Synchronization
  • Front LED – solid red
  • Rear LEDs – The LED corresponding to the original disk will be blinking blue and the one being synchronized is blinking red
  • Once both disks are synchronized, their corresponding rear LED and the front LED will be solid blue.

Apr 06, 2010 | LaCie 2 TB 2big Triple Interface External...

1 Answer

I have a Netgear rnd2110 with 2 1TB disks - when copy large amounts of data to NAS drive - the system crashes with a "blue screen"


Hi, Please upgrade the RAIDar Software for NAS. You may download the same from the below link:

http://www.readynas.com/?cat=41

If the issue persists then please log a compalint with official NETGEAR support site at my.netgear.com

Regrds
Anand

Jan 05, 2010 | NetGear READYNAS DUO RND2110 1000 GB...

1 Answer

Flash drive lost some of its space


When the flash memory device appears to malfunction it maybe possible to restore it by reformatting it. Insert the flash drive into the USB port then Click on Control Panel - Administrative Tools - Computer Management - Disk Management.
Then right click on Disk 1 removable drive and click Format. After the flash drive has been formatted it will indicate that it is Healthy.

You need to format the external drive. Format the drive as primary drive and in FAT32. (FAT32 will allow data to be exchanged between MACs and PCs).
Insert the external hard drive into the USB port then Click on Control Panel - Administrative Tools - Computer Management - Disk Management.
Then right click on Disk 1 removable drive and click Format. After the flash drive has been formatted it will indicate that it is Health

Oct 22, 2009 | Computers & Internet

1 Answer

I have a ReadyNas NV+ , I can't access


Try using the RAIDar utility again to see if all is working. Can be downloaded from downloads on ReadyNas.com. You may need to call Netgear for support.

Mar 23, 2009 | Infrant Technologies ReadyNAS NV+...

1 Answer

HP Media Vault - Power on / fan on / front panel indicators off


I read a bunch of material found on the web. Primarily this led me to believe that the Lynix flash OS has some issues (to say the least). After carefully testing out the mom board voltages I decided that there was probably a software boot issue.

I read this at k0lee.com/mediavault/
"The MV1 has a hard reset which severs the tie to the startup.sh script that calls any of the installed software." The material on this site also indicated that the stored files would not be affected by a hard reset. So what the heck... nothing to lose. I unplugged the power, pressed the reset button and then applied power. Held the reset button for > 5 seconds. Held my breath for 30 seconds and the disk light started to flash on the front indicator panel. After a minute or two of that, the OK light came on. I pressed the power button on the front panel and the it responded. Another miracle? Hmmm. The MV shut down. I connected to the LAN and powered back on. Every thing worked fine.

I guess... there was a space issue / startup parameter corruption / enemy electron in the mix that was passed over with the hard reset at start up. Since there is on access to the OS boot process, (or source code) this is pure speculation. Although, it is reasonable speculation. Chao!

Nov 29, 2008 | HP StorageWorks Media Vault Pro mv2040...

1 Answer

Flash drive problem


Try this first:
Right click my computer, then go to manage, then go to disk management and look for the removable disk (your flash disk) then right click it and try to delete and create partition. then format.

May 21, 2008 | Computers & Internet

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

126 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...