Question about Singer 1525 Mechanical Sewing Machine
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Try inserting the bobbin in the reverse direction. Most machines take a bobbin clockwise or counterclockwise and it can make a difference. Also try a new needle, a bad needle is often the problem believe it or not.
Posted on Nov 10, 2009
If you turn the handwheel, can you see a metal ring rotating around the outer edge of the bobbin case? If not rotating, broken gear or timing belt off.
If that ring is turning, remove the needle plate and bobbin case. As this ring now rotates, you will a finger on the ring that will pass behind the needle from right to left and it should catch the thread from the eye of the needle. If this finger, the "hook" passes above the eye, you have a timing problem.
Let me know.
Posted on Feb 16, 2010
If you broke a needle and cannot get it to pick up the thread from the bobbin you need to check your timing. Remove the needle plate and turn the machine over watching the needle, when it is at the bottom of its travel the hook on the shuttle should be right next to or a fraction from the needle. So that as the needle begins to move upward the hook should pass it if it passes to soon it will miss the loop of thread. Check to make sure your needle is installed all the way up in the bar. If your machine is out of time and you are fairly handy, you can retime it. There should be 2 set screws some where behind the shuttle. Loosen them, one loose and one only as loose as need be to turn the shuttle. The needle must have moved upward about 1/16 before the hook is in place to catch the loop. This can be time comsuming, and you will have trial and error. Good luck. P.S. always check for simple stuff before you go for the hard stuff.
Posted on May 25, 2010
Tips for a great answer:
Jun 05, 2017 | Singer Sewing Machines
Dec 13, 2015 | Singer Sewing Machines
May 01, 2015 | Singer Sewing Machines
Jun 09, 2012 | White Sewing Sewing Machines
May 18, 2011 | Singer Sewing Machines
Jul 16, 2010 | Singer Sewing Machines
Nov 10, 2009 | Sewing Machines
Sep 19, 2009 | Singer Sewing Machines
Dec 29, 2007 | Singer CE-200 Quantum Futura Computerized...
215 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: