Question about Linksys WMP300N Pre-802.11n Wireless Adapter

1 Answer

Linksys Wireless-N pci adapter model wmp300n

I'm runing vista. I have a Linksys Wireless-N pci adapter model wmp300n.

My wireless card connects to my router but it stays Local or just Unidentified Network and wont connect to the internet. Other comps works fine.

Posted by on

  • Gavean Jul 16, 2008

    I have windows XP on my desktop. I just got the Linksys Wireless-N pci adapter model wmp300n and installed it. but when I connect through the wireless, it says that I'm connected to the net, but it wont run any programs like IE, Firefox, aim, yahoo, etc.





    but when I have the wired connection connected to the router, it works fine....

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 60 Answers

If it says local or unidentified network that means you are just connected to the router on the network but not through the internet. Try to go to manage wireless network, remover your network there and add it again, connect to your own network and make sure to type the correct network key., then check again. You can also try connecting to other wireless network to further isolate the problem.

Posted on Aug 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have wmp300-n card. I install card (software & drivers). The wireless works fine for about 20 minutes then pc freezes up. I have tried to uninstall software that came with it and let windows run it,...


i had that problem with another adapter, then i figured out that i was having problems with another pci adapter. so if you have another pci at the same time, try unplugging it and left the wmp300n alone, it worked for me

Apr 25, 2010 | Linksys WMP300N Pre-802.11n Wireless...

1 Answer

Encryptiing


Is your router from linksys also? How many wireless computers do you have? Note that if you encrypt your router, you need to make sure that each wireless computer gets the exact encryption keys you will use on the router. Usually the linksys router page can be accessed via http://192.168.1.1. Leave username blank, password is "admin". Go to Wireless >> Wireless Security. Select WEP-128 key. Enter in a passphrase and hit generate. Copy key #1 on a piece of paper (make sure it's 26 characters) and click apply. Next, go to each wireless computer and use encryption key#1 when you connect to the linksys router.

Jun 19, 2009 | Linksys WMP300N Pre-802.11n Wireless...

1 Answer

Cannot connect to wireless network


may be your router needs a firmware upgrade.
check the router's website.

and make sure the router and the wireless card are both using the same 802.11 protocol

Feb 22, 2009 | Linksys WMP300N Pre-802.11n Wireless...

2 Answers

Cannot get wireless working on vista


Physical to Vitual Vista? if it is a virtual setup the xp machine will latch onto the nic card not giving it to anything else. what Virtual emulator are you using? There are settings that have to be set to allow the local nic card to be used.

Jan 15, 2009 | Linksys : WMP54GS Wireless-G PCI Adapter...

2 Answers

Wireless Network Disconnecting


u have to reset your wifi router.
reset switch is in back of router and configure asgain.if u not need static ip then comfigure as dhcp

Jan 06, 2009 | Linksys WRT160N Wireless Router

1 Answer

LOW SIGNAL


Usually our CPU is on the floor or under the table, the common problem is signal, try to put your CPU on the table to roam a wider range. if still not much signal, just change your antenna with a better one.

May 20, 2008 | Linksys WMP300N Pre-802.11n Wireless...

4 Answers

Linksys WMP300N Endless Bootup Loop


Disable or uninstall the Linksys software that manages and monitors the connection.

Use instead the Microsoft Windows Wireless configuration utility.

That's what I did and didn't get problem after.

Dec 30, 2007 | Linksys WMP300N Pre-802.11n Wireless...

Not finding what you are looking for?
Linksys WMP300N Pre-802.11n Wireless Adapter Logo

Related Topics:

487 people viewed this question

Ask a Question

Usually answered in minutes!

Top Linksys Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

mark

Level 2 Expert

105 Answers

Are you a Linksys Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...