Question about Brother MFC-8860DN All-In-One Laser Printer

1 Answer

How do I take off the message drum near end when its has been replace

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 78 Answers

Open the toner cartridge door. Press clear on the console. A message shold display saying "replace drum? press 1 or 2" press the corresponding number to reset the drum counter. This is a very important step when replacing the drum as it actually changes the voltage setting for the dc power regulator. If not performed, and a partially used toner cartridge is in, waste toner can be pulled out of the cartridge and can contaminate the drum unit.

Posted on Sep 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix brother printer drum error troubleshooting and routine maintenance


I still receive the error message "Replace Drum", "Drum End Soon", "Drum Near End", or "Drum Stop" after I replace the drum unit with a new one. The following error messages will continue to appear if the drum counter was not reset when you replace the drum unit with a new one.
  • Replace Drum
  • Drum End Soon
  • Drum Near End
  • Drum Stop
To clear these error messages, you need to reset the drum counter as instructed below.

If you want to clear an error message related to the toner replacement, click here to see how to clear an error message after you replaced the toner cartridge.
"What is the difference between the toner cartridge and the drum unit?"

Please reset the drum counter only when you replace the drum unit. If you reset the drum counter during the life of the drum unit currently being used, the remaining drum life will not be displayed accurately.
  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Press Clear or Clear/Back on the control panel.?
    NOTE: The layout of a control panel differs depending on the model, but the Clear or Clear/Back button is located on the right side of the LCD screen as shown in illustration.
  4. Do one of the following.

    • If your Brother machine has a numeric keypad:
      Press 1 to reset the drum counter.
    • If your Brother machine doesn't have a numeric keypad:
      Press the Up Arrow Key to reset the drum counter.
  5. When the LCD shows Accepted, close the front cover.

frontcover1-y4i03b33115mpu3ejihwhjwc-5-0.gif

controlpanel1-y4i03b33115mpu3ejihwhjwc-5-2.gif

Sep 11, 2017 | Brother Office Equipment & Supplies

1 Answer

Drum error dr-420


Sir/Madam

he following error messages will continue to appear if the drum counter was not reset when you replace the drum unit with a new one.
  • Replace Drum
  • Drum End Soon
  • Drum Near End
  • Drum Stop
To clear these error messages, you need to reset the drum counter,
Or Visit official Brother Printer website For Brother Printer Troubleshooting Page Url Below:http://welcome.solutions.brother.com/BSC/public/us/us_ot/en/faq/faq/000000/002800/000037/faq002837_000.html?reg=us&prod=mfc7340_us_as&c=us_ot&lang=en

Or
Still Having Problem then follow Us On For

Brother Printer Support

Jan 14, 2014 | Brother Office Equipment & Supplies

1 Answer

I still receive the error message "Replace Drum", "Drum End Soon", "Drum Near End", or "Drum Stop" after I replace the drum unit with a new one.


did you do the reset procedure? if not it's in your owners manual under the section "replacing the consumables".
hth,
razors

Nov 29, 2011 | Brother HL 5250DN Laser Printer

1 Answer

My Brother 8065 says "Drum


  • This message would appear if the drum unit is near the end of its life. Use the drum unit until you have a print quality problem, then replace the drum unit with a new one.

  • This message would continue to appear if the drum counter was not reset when you replaced the drum.
    To reset the drum counter, follow the instructions below:

    1. Open the front cover.
    2. Press the Clear/Back key.
    3. Press 1 to reset.
    4. Close the front cover, pressing firmly on each side until they click into place.

Jan 25, 2011 | Office Equipment & Supplies

2 Answers

Does the 'Drum Near End' message for MFC 8460N mean to indicate the toner cartridge needs replaced?


Same with our Brother 8640N, drum near end means toner is nearly to end but sometimes even you replace bew cartridge is appears this message. TONER LIFE END message need to replace cartridge.

Dec 17, 2010 | Brother MFC-8660DN All-In-One Laser...

1 Answer

Brother DCP 8060 is displaying drum near end what does thic mean


After approx. 25000 pages you should replace drum unit

This message would appear if the drum unit is near the end of its life. Use the drum unit until you have a print quality problem, then replace the drum unit with a new one.

This message would continue to appear if the drum counter was not reset when you replaced the drum.
To reset the drum counter, follow the instructions below:

  1. Open the front cover.
  2. Press the Clear/Back key.
  3. Press 1 to reset.
  4. Close the front cover, pressing firmly on each side until they click into place.

Oct 04, 2010 | Brother DCP-8060 All-In-One Laser Printer

1 Answer

Drum End Soon


You will soon need to replace the drum. Its considered a consumable just like the toner cartridges. You can purchase the drum anywhere that sells brother pruducts.

May 24, 2010 | Brother HL4040CN Laser Printer

1 Answer

Drum life near end


Depends on the usage of the machine. If hardly used, you should get a years worth. But here's what you can do:

Open front cover

Remove drum unit and toner cartridge assembly

Put drum unit and toner cartridge assembly back in machine, but do no close front cover.

Press Clear/Back
You will get a message "Replace Drum?"
Select Yes to confirm

Apr 19, 2010 | Brother MFC-8860DN Printer

1 Answer

MFC-8460N Drum Changed - cannot clear DRUM NEAR END message


This sometimes happen when you dont use genuine cartridges/drums, you can leave it flash just let everyone know to watch for changes in print quality since you will no longer have a warning for this drum. when its near its end.

Feb 24, 2009 | Brother MFC-8460N All-In-One Printer

Not finding what you are looking for?
Brother MFC-8860DN All-In-One Laser Printer Logo

166 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

CheckitRight
CheckitRight

Level 3 Expert

1362 Answers

James Cagle
James Cagle

Level 2 Expert

454 Answers

Samyfam
Samyfam

Level 3 Expert

379 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...