Question about Whirlpool Duet GHW9150P Front Load Washer

1 Answer

I need to revere the door on my whirlpool washer GHW9100LW2.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.
I recommend both sites because ...


FixYa has no affiliation with either site - I have been using and recommending them for years - trouble free.

PartSelect has a great schematic database for locating the part on your unit and great "testimonials" for each part that often times includes HOW-TO information.
RepairClinic has pictures of each part they sell and also a great how-to and troubleshooting for basic repairs.


If your unit has never been serviced - there should still be an original service manual enclosed in plastic taped to the inside of the shell.
In the service manual are Error codes, maintenance procedures, and troubleshooting steps you can follow.


Anything too complicated or beyond your scope should be handled by a professional.

If you think you want to tackle the repair - and have gotten stuck on a step - reply to your question and I will be glad to help you out.




Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question&^%&*

Posted on Oct 01, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Water wont shut off whirlpool ghw9100lw2 left door open between loads and water ran flooding floor. Came from inside washer and out open door?


This is almost certainly the inlet valve gone bad not shutting off the water, just unplug appliance to confirm if water is still coming in if so just replace the valve
TK

Jan 30, 2017 | Whirlpool Washing Machines

1 Answer

My Whirlpool Front load washer model#: GHW9100LW2 is leaking from the front door area


First try cleaning seal, soap builds up and causes leaks. Inspect for any tears. If still leaks seal needs to be replaced. You can get parts from appliancepartspros.com they have good prices.

Sep 27, 2010 | Washing Machines

1 Answer

WHIRLPOOL WASHER MODEL #GHW9100LW2


push and hold cancel button for at least 3-5 sec.

Jun 11, 2009 | Maytag MAV4755A Top Load Washer

2 Answers

Vibrating Whirlpool ghw9100lw2


At Lowes you can purchase foam rubber pads 4"X5" pack of two for $3.50. If walking forward and after cecking level and washer pads are tight, place half of one pad under each of the two front feet. Place the sticky side against washer feet. Solved my problem.

Feb 15, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool front load washer, Clicking noise during spin cycle


i would open the door nad with your hand (glove on if preferred), feel around the intereior of drom for prhaps a nails, or hair clip that has gotten caught in one of the many holes in tub

Dec 21, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool washer model number GHW9100LW2,SER# CSR2021497


Central Control Board part 8182221. You can go online repairclinic.com to order parts.
Good luck

Jun 27, 2008 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

Whirlpool ghw9100lw2 front load washer doesn't use both hot and cold


first make sure the hoses aren't reversed hot on cold or cold on hot next turn off cold water remove the hose from the washer and check to see if the screen on the washer is clogged if not get a bucket turn on cold water and see how strong the water is then let me know what you find dont rate me till we are done

Jan 10, 2008 | Whirlpool GHW9100L Front Load Washer

Not finding what you are looking for?
Whirlpool Duet GHW9150P Front Load Washer Logo

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Washing Machines Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Gerry Harvey
Gerry Harvey

Level 3 Expert

1456 Answers

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...