Question about Euro-Pro Denim Sewlution 380 Mechanical Sewing Machine

1 Answer

I have a Euro pro denim machine model 1260 dx. It picks up the bobbin thread on the "0" setting but not the "M" setting. I have found a loose spring inside the machine. Does anyone have a schematic to help me figure out where the spring goes? Are there any other suggestions as to why the the thread won't pick up?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,777 Answers

Very strange, does it act like it is attempting to pick up the thread in M "mode"? Or does it not even try to spool it / pick it up? Did it used to work fine in this mode and suddenly one day it no longer did? Or have you never tried M mode previously maybe? Let me know on this stuff, trying to track down the schematic for you.


Posted on Sep 30, 2010

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I need a free manual for a Euro-Pro Denim Sewing machine, model # 1260 DX

I don't know of any place to get a manual free, but here are some placed to try

May 30, 2012 | Euro-Pro 1260DX Mechanical Sewing Machine

1 Answer


check with these websites

Sep 05, 2011 | Euro-Pro 1260DX Mechanical Sewing Machine

1 Answer

How to thread euro pro 380a sewing machine lost mannel

My needle will not pick up my bobbin? I have tryed everthing! my bobbin was placed in the holder right. my needle is in the EP correctly! not sure if my Thread is correct in my machine. but I have read the manual and still cant get the needle to pic up. Can some one help me out on this! Euro-PRo 380A

Dec 16, 2010 | Euro-Pro Denim Sewlution 380 Mechanical...

1 Answer

Needle does not pick up thread from bobbin

Is your needle inserted with the flat side facing the rear of your machine? Are you holding your top thread as you rotate your handwheel toward you to lower the needle? Is your bobbin threaded right, check your manual. It is usually something very simple when this happens.

Sep 09, 2010 | Euro-Pro Denim Sewlution 380 Mechanical...

1 Answer

Where can I get bobbin replacements for my Euro Pro EP 380 Denim Sewlution machine? It only came with one. Online somewhere?

You should be able to pick up bobbins to fit the machine at any fabric store. Just take the one you have with you - make sure it still has thread on it, so it isn't taken for store stock.

If you are looking for a bobbin case, then contact the manufacturer's parts department. The number is listed in the back pages of the machine manual. You can also call in at your local sewing machine repair shop - establish a relationship with the repair person. It will serve you well in the future. Good luck!

Aug 30, 2010 | Euro-Pro Denim Sewlution 380 Mechanical...

2 Answers

How to thread the euro-pro denim machine model 90-1260DX ...or where to locate a manual, Thanks.

I need to know where I can purchase a foot pedal for my Euro-Pro Denim 1260 sewing machine.

Dec 03, 2009 | Euro-Pro 1260DX Mechanical Sewing Machine

3 Answers


it is not free, but here is were to find one...
good luck, star

Sep 27, 2009 | Euro-Pro 1260DX Mechanical Sewing Machine

2 Answers

Trhreading If so it threads just like my sewing machine.Draw your thread across the top,down into the first slot,then up and thru the second slot,come down,pass it thru the thread guide on the needle,then thread your needle.Most all machines are basic when it comes to threading.HTH

May 20, 2009 | Sewing Machines

Not finding what you are looking for?
Euro-Pro Denim Sewlution 380 Mechanical Sewing Machine Logo

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Euro-Pro Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1122 Answers

Derek Massey

Level 2 Expert

92 Answers

Irene Tulloch

Level 2 Expert

458 Answers

Are you an Euro-Pro Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides