Question about Lexmark Office Equipment & Supplies

3 Answers

I have a lexmark e250dn printer. Today the printer has stopped working. The help ! indicator on the printer is an orange color as well as the toner/and drum indicator is an orange color.The ready indicator is not coming on blue. This previous week I replaced the tone and drum (the frame that goes around the toner) The toner/drum indicator has been orange since. The message that comes out of the printer is: The printer has stopped because the photoconductor kit has reached the end of its usefull life. Please replace the photoconductor kit to prevent printer damage and continue printing. Is there a tab or a certain step to take when changing the photoconductor kit? I await your reply

Posted by on

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 9 Answers

Here is how to reset the photoconductor kit counter:

1. Make sure the new kit is installed and the printer is turned ON.

2. Open the front panel.

3. Hold the Cancel button in until the front panel LEDs flash.

4. Close the front panel

Posted on Mar 26, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Turn off the printer Open front door Press and hold "Continue" (big botton) and turn on the printer until the Help indicator (!) light is orange Press slowly 5 times Cancel botton: Toner/Drum light and Continue must be turned on. Press and Hold Continue Botton until all Leds flash quickly. Turn off the printer Wait 5 seconds Turn on the printer. Enjoy
Salu
LeoZero1

Posted on May 19, 2010

Sa va fut

Posted on Jul 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

All of the lights on my lexmark E250d are flashing????


The printer has a service error, and printing has stopped. Press Continue twice to see the secondary code. The secondary code will indicate where to locate the problem.


For further assistance, please contact Lexmark Technical Support.

Jul 14, 2011 | Lexmark E250dn Laser Printer

1 Answer

My printer lexmark model E250DN....the problems it`s when complete put back the tone cartredge...got some noisy came from printer...noisy like stuck...already refill the paper...i try again pull out he...


The noise coming from the printer is an indication that there is a hardware issue. It would be best to call Lexmark Technical Support for further assistance.

May 16, 2011 | Lexmark E250dn Laser Printer

1 Answer

Driver for Lexmark E250dn laser printer


LEXMARK E250dn Driver
Visit the above link. Select the OS (Operating System) and download the required drivers.

Hope it helps! Good Luck!
CreativeTECH

May 02, 2011 | Lexmark E250dn Laser Printer

1 Answer

My Lexmark E250dn is constantly having paper jams, if I print more than 10 pages at a time I always have to stop and fix it, are there any solutions?


Check the paper feed path if everything is cleaned out and aswell your exit sensor.

If that dosent help clean you pick up rollers.

Also give me more details on more or less where it jams in the printer?

Nov 10, 2010 | Lexmark E250dn Laser Printer

1 Answer

How do I find out the IP Address of my school's Lemark E250dn printer?


You can print the network setup page to view the Lexmark E250dn's IP address. Visit the Lexmark at http://bit.ly/9kdDvc for the instructions on how to print the network setup page. Thanks.

Sep 28, 2010 | Lexmark E250dn Laser Printer

1 Answer

Hi, my name is alex a Computer - printer technician i have a lexmark e250dn all lights are blinking,indicating a service error ,sometimes all the lights are just on and not blinking ,i have tried to...


If you can see an error code and let us know, that would be good.
Failing which, you could try re-seating the cables connecting the print head, fan, etc to the system board.
If the error was due to low voltage, your printer might have started working again by now. :)

Sep 22, 2010 | Lexmark E250dn Laser Printer

1 Answer

My Lexmark E250DN said it needed a new Photoconductor so we replaced and it still says we need a new photo conductor, How do I fix this?


Whenever you replace the photoconductor unit, remember to reset the PC counter. With the printer powered on, open the front door/cover. Press and hold the cancel button until all the lights flash. This indicates that the photoconductor page count has been reset. Hope this helps. Thank you for choosing Lexmark.

Jul 16, 2010 | Lexmark E250dn Laser Printer

1 Answer

I changed the toner on my Lexmark E250dn and now it has the "!" light on all the time and won't print. It's a new cartridge what is going on?


"!" means error.

Try removing cartridge and installing it again and might be one of the cartridge missing.

Try operating manual. Might helps, there are lots of reason for the error
ftp://ftp.lexmark.com/depot/LXK/E250_Depot_Repair_rev092606.pdf

Suspected
Follow the link on dispute about wrong cartridge due "Toner cartridge region mismatch"
http://www.techsupportforum.com/hardware-support/printer-support/379157-lexmark-e250dn-amp-quot-toner-cartridge-region-mismatch-amp-quot.html

Hope this helps
.

May 21, 2010 | Lexmark E250dn Laser Printer

1 Answer

Lexmark E250dn laser printer


Reinstall the drivers and see if it works.

Otherwise unplug the printer from the power and leave it without power for 10 minutes. Than plug it back in and let me know if it helped.

Feb 08, 2008 | Lexmark E250dn Laser Printer

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

2,955 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Roopesh S
Roopesh S

Level 2 Expert

228 Answers

Sanath Kumar V

Level 3 Expert

684 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18331 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...