Question about HP ProCurve 2424M (J4093A) 24x10/100 Mbps Networking Switch

3 Answers

Trying to connect an AVAYA telephone switch to a procurve 2424

Posted by on

  • 1 more comment 
  • roy_beck Sep 30, 2010

    This is not an IP telephone system...It is an S8300 digital.

    Will the instcuctions you provided still suit the application?

  • roy_beck Sep 30, 2010

    This solution does not appear to be suitable for the HP 2424 switch. The os on the switch does not have the same configuration options.

    Be that as it may I am simply looking to get the two to connect...I am not using VOIP sets nor do I need QoS at this time.

    Is there a simple port configuration I need to implement on the 2424 to get the two devices talking to one another?

  • roy_beck Oct 01, 2010

    Again, no...you do not understand the issue.



    I am NOT using VOIP telephone sets. I have an AVAYA S8300 PBX with standard AVAYA 2410 digital sets...it is connecting to my LAN network through an HP Procurve 2424 so it can communicate with my other S8300 PBX units.



    My issue is:



    The S8300 will not establish a connection on ANY port on the 2424.



    I am unable to configure the port on the 2424 mostly due to the fact I am unfamiliar with the IOS.



    The documents you have provided me thus far have described the problem, and the solution other HP Procurve switches but not for the 2424.



    Does this help clear it up for you?

×

Ad

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 4,323 Answers

Hi


Please check out instructions on pg#23 for your HP procurve 2424 in this instructions manual--

HP Procurve 2424 Switch


Hope this helps... If it does please do not forget to accept the solution or post back for assistance.

Posted on Oct 01, 2010

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 567 Answers

Hi,

Please visit this link for the manual of your Avaya S8300 Digital Phone.

The detailed configuration steps are outlined in the same and will help you in setting up the device successfully.

If this doesn't work for you, please comment and let me know, and I will be more than happy to assist you to further resolve your issue.

Posted on Sep 30, 2010

Ad
  • Level 1:

    An expert who has achieved level 1.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Contributor
  • 857 Answers

Check this link for detailed indtructions :

http://support.avaya.com/css/P8/documents/100061091

Posted on Sep 30, 2010

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

We unplugged our Avaya model 1416 D02A and now it is asking us for a PASSWORD / LOGIN!! we don't have any password for it?  how do we get it working again>? URGENT


Password should be on the rear, or in the original instructions.

If not, you have to Reset it and then set it back up.

Mmmm, that model number comes up as a phone not a router. Here is your user guide, so have a read.

[PDF]1408/1416 User Guide - Avaya Support https://downloads.avaya.com/css/P8/documents/100073316
  1. Cached
Avaya 1408 and 1416 Telephones - connected to Integral Enterprise - User. Guide. 16-603463. Issue 1.09. January 2010 ...

1408/1416 User - Avaya

marketingtools.avaya.com/knowledgebase/user/ipoffice/.../gettingyourmessages.htm
  1. Cached
  2. Similar
Jan 14, 2015 - If your telephone system includes a voicemail server, pressing the key messages MESSAGES button accesses voicemail. Your system ...

[PDF]1408/1416 Telephone User Guide - IP Office Info

www.ipofficeinfo.com/pdf/1408_1416_user_en.pdf
  1. Similar
Nov 6, 2015 - 1408/1416 Phone User Guide ... Avaya reserves the right to make changes and corrections to the ..... 7.2 Manual Account Code Entry. Avaya model 1416 D02A Google Search

Nov 23, 2016 | Avaya Computers & Internet

1 Answer

How to I reprogramme the main answer message on the avaya 9620


Hello there,

As an aside, I hope you are not referring to Voicemail which is a different thing entirely/

Avaya 9620 is an IP only Phone. This means it CAN ONLY be connected to an IP Phone system.
Excerpts from guide
'Which systems can you connect your telephone to?
This telephone is intended solely for connecting to Avaya communication servers. '
'These telephones are intended for connection to Ethernet/LAN interfaces of IP-capable Avaya telecommunications systems
and fulfill the basic requirements of Directive 1999/5/EU (R&TTE)'
'The design of these telephones makes them unsuitable for direct operation on interfaces of public telecommunications networks'

All this means is that you cannot connect your phone direct to a normal Telephone line.

Please read the beginnning of the guide here.
http://downloads.avaya.com/css/P8/documents/100077496

So , it looks to me that there used to be ONE telephone system for your two Companies and now you have split up, NO ONE appears to be taking responsibility for programming the AVAYA Phone system to which your telephone is connected. It MUST be somewhere in the building !!!
Try and find it. IT will be here that the answerphone facility is programmed....definitely NOT your phone.

Sep 18, 2014 | Lands Phones

1 Answer

Can we have caller ID on the 3158-05


The Avaya 3158-05 does not have a display. It can't show the Caller ID information from the telephone provider. The Avaya 3158-07 PARTNER 18D or the 34D will display Caller ID information if your system is connected to a telephone line. (One of these modules: 206EC, 308EC, or 400EC, is required. If you have a T1 line, you can't get Caller ID.)

I hope this helps.

Cindy Wells

Sep 17, 2013 | Avaya Partner 18 Telephone 3158-05

1 Answer

Aastra 9110 message light doesn't light


were you able to get this working? hat did you have to do?

Dec 07, 2012 | Aastra Telecom Aastra 9110 Single Line...

3 Answers

Have HP Procurve 2650 switch with some cisco wireless accespoints (WAP2000) attached. when roaming the user-device from one AP to the other, network connectivity is lost for quiet a while, when APs are...


What I saw is that you can only set it to three roaming types, (PMK Caching, Opportunistic Key Caching, PreAuthentication).

Try to turn them all on and see what happens. Here is a screen shot for it.
roadfox_77.jpg

Aug 05, 2011 | HEWLETT-PACKARD ProCurve 2650 Stackable...

1 Answer

Hello, when i connect more users in my switch i lost network connection, but with few users i can get the link


I'd contact HP ProCurve support at 1-866-my-procurve. They will ask for the show tech all report from the system to help diagnose the problem. It sounds like there's a significant problem with this switch to cause this problem. I've dealt with ProCurve switches for going on 9 years and haven't seen this problem.

Dec 08, 2010 | HP ProCurve Switch 2610-48-PWR 48-Port...

1 Answer

Ethernet modelA in Procurve 4104gl J4887A not work


What blade is in module A? If it's a PoE blade, you must have the EPS connected to the front of the blade.

If this isn't the trouble, then I'd suggest a phone call to ProCurve support... 1-866-my-procurve

Mar 10, 2010 | HP ProCurve 4104gl Networking Switch

1 Answer

Trying to Configure HP ProCurve 2524 24x10/100 Mbps Networking Switch as DHCP and creating a VLAN and connecting Linksys access points to that VLAN


This switch will not function as a DHCP server itself. You will need to have a DHCP server on the VLAN with the access points to give out IP's to the wireless users.
HP has free design and configuration services http://www.procurve.com/customercare/services/design-center/index.htm

Feb 08, 2010 | HP ProCurve 2524 24x10/100 Mbps Networking...

1 Answer

Fault light


Hi Tculver, I have ProCurve 2424, 2524 and 4000/8000s so I can?t really address your direct question but I may have some advice. I know lots of people who use ProCurve devices and don?t realize they have a lifetime warranty. You might want to consider just flashing them with the latest firmware and if it continues call HP support. If they can?t fix them over the phone they?ll send out replacements via next day deliver. Its one of the major reasons all of my switches are HPs. Let us know what happens and please don?t forget to rate the posting.

Jan 18, 2007 | HP ProCurve 2626 (J4900B) 24x10/100 Mbps...

Not finding what you are looking for?
HP ProCurve 2424M (J4093A) 24x10/100 Mbps Networking Switch Logo

Related Topics:

111 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...