STUCK ON SETTING

Check the water is turned on at the wall where the machine is plugged in.
If this does not work try on a different setting like example spin cycle only.
It could be stuck on a setting and need to reset.
Regards Craig

I assume that pushing the channel up and channel down buttons does nothing. You could try unplugging it overnight and see if it's forgotten its settings come morning. But if that doesn't work, you're probably going to have to get a universal remote and program it to your TV. Quite a number of TVs (and DVD players and VCRs for that matter) no longer have a full set of controls on the TV. Some things just can't be done without the remote (a fact that really irritates me). -Dyllan

You might try going to the screen setting and try looking at wall paper setting. Also you might try looking or reading the book that comes with your phone.
hope that helps

I don't know what 80kl is. Are you saying the trans is in 3rd gear pulling out and no 1st or 2nd? Or it setting still and in 3rd. Engine RPM going up....I don't follow you?

Unplug plug in hold s/s button (for up to 15 seconds) until machine beeps then proceed

sounds link the servo door has either broke off or is not working and it is stuck in a closed position

Went to Best Buy Store and ask all kinds of questions and they helped me.

check senser

I hit mine with a hammer It works well again now.

This worked for me. Thanks.