Question about Dell (2336V) Motherboard

1 Answer

No display when i turn on pc

I have a abit 680i sli motherboard i have my card in the master slot im not running sli my vga is a 8500gt i tried swapping it out with my 7300le still nothing put old motherboard in and use my 8500gt and it works smae everthing but motherboard is it doa or what oh yeah for some reason it acts like it doesnt get good connection with usb i have to hook my mouse up just right to get it to light up and my cpu runs really hard but thats it just a bunch of lights fans run no beeps and no display no guru code it just says c1 i tried clearing the cmos everyway the book tells me to no good though
i would appreciate the advice i removed the processor and the Ram from the motherboard and later when i fixed them back it was not able to boot. My power supply seems to work and the processor seems to work but i don't here any beep and my hardware shows no sign of working please help me.

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 187 Answers

You mentioned there were no beeps. Do you not even get the single beep (Post)? Did this issue only start after removing and reseating the CPU/Ram? If so, check they are seated properly.

Posted on May 25, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I am trying to download xfx nforce 680i latest bios update, and i can't get it anywhere can you help??

i share my toolkit to you.. open on this link Steps.1.Download 2. Choose click here 3.Run on your desktop..

it will automatically search your motherboard hardware driver..

Choose the driver you want to download
it will redirect on download site..

4.choose version or type of o.s you have been run.
5.Download & Install

Sep 22, 2011 | Pine Technology XFX nForce 680i LT SLI...

3 Answers

I want to use two Graphics card in single motherboard

Not on this motherboard, and not with two different video cards. Your motherboard does have two PCI-E slots at x1 speed, but only one slot at x16 speed. And when you use SLI you should use two identical video cards for best results.

Mar 20, 2009 | XFX NVIDIA GeForce 8500 Graphic Card

1 Answer

Please help me to solve no display evga 680i sli (- -)error code

hi im josh in cebu phils.may i help you? friend try my solution ; Problem: Your Monitor Works, but Displays an Error Message Before Windows Loads If you see an error message, you at least know that video signals are getting to your monitor. Look for these common messages:
Bad or missing FILENAME In this message, the FILENAME refers to your video card's device driver file. Make sure that the driver has been copied to your hard disk and selected properly within Windows.
NUMBERxx This type of message (such as 24xx) indicates that you have a defective video card or a problem on the motherboard, or that you are trying to display in a mode that your system can't display. Check all the switch settings on your card and motherboard, and if the problem persists, see a repair technician. try to use that, good luck hope i helped you.

Mar 04, 2009 | Evga nForce 680i SLI (122CKNF68)...

1 Answer

No boot

if you had received a cd with the card that contains drivers i would replace the old vga card and, assuming it boot s okay, load the CD. after this shut down, swap cards, then reboot. 

Feb 07, 2009 | Abit KN8 SLi Motherboard

1 Answer

Updated driver problem.

Well you should probably roll back that driver to the previous version. Doesn't sound like it gave you the correct new driver for the card or it wouldn't be messing up like that.

Jan 04, 2009 | SPARKLE Computer Sparkle GeForce 8500GT,...

6 Answers

No display when i turn on pc

so..let me have 2 mainboards,two video preocessor and rammsso you have quite some possibilities.
fisrt of all I have to say that just clearing the bios is not a solution..would be better to update it,by downlaoding it from the manuufacturers site and after you made a bootable cd than under dos mode re write the bios..
however you cant see anything without a propper signal with new motherboard.
take the new mother board..
so..chech the rams.if you have more ramm dimms let only one in the board but be sure is the one near the proccesor slot and check it to be well inserted.
-put the video cards first the 8500 one,see what it an observation:if the hdd is damaged the computer runs showing you the dos mode/you are able to reach the bios
processor damaged-computer can run/blue screen with some infos/it is note  a rule that you can reach the bios
ramms distroyed or put starts/dos mode/able to work in bios
video card damaged -NO SIGNAL AT ALL
moather card damaged-No signal at all.
so think and pay attebtion to the details of the errors.

You can make different tipes if combinations and by elimination youll discover the faulty component.
from now I can only presume is the new mother board
good luck .its a booring work but is nothing you can do more
bye bye

Feb 06, 2008 | Abit IN9 32X-MAX Motherboard

2 Answers

Installing NVidia 8500GT XFX 256MB graphics to A8N-VM Motherboard

The chances are that you have an old motherboard which is not compatable with the new graphic card. Or you may be running windows 98 and are downloading the driver for xp or visa versa. The probable solution, will be to sell the new card on ebay and buy the best old card you can off ebay. Or just make do with the card you already had in your computer. If you are determined to have a better graphics card. A motherboard upgrade with better graphic card may be the best answer or buy a better spec pc second hand if you don't have much money. You'll probably waiste a lot of time trying to get the new card to work and it probably never will.

Jan 28, 2008 | ASUS A8N-VM Motherboard

Not finding what you are looking for?
Dell (2336V) Motherboard Logo

Related Topics:

150 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18420 Answers

Alun Cox

Level 3 Expert

2678 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides