Question about Fujitsu fi-5120C

1 Answer

Code DS42003 PAD ASY IN PAPER FEEDER

Code DS42003 PAD ASY IN PAPER FEEDER

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

After you've been scanning for a while with your Fujitsu 6110 or 6130 scanner, you will get a message from the scanner recommending that you replace some of the scanner's consumable parts, such as the pick roller and pad assembly. Although you can ignore these messages, they will keep showing up, even after you have replaced the parts, until you also clear the scanner's page counters in the Software Operation Panel.
http://www.scan123.com/blog/index.cfm/2013/3/15/How-To-Reset-Page-Counters-for-Fujitsu-6110--6130-Scanners

Posted on Oct 14, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Document feeder pulls multiple pages


Sir/Mam,
Mite want to have the rollers cleaned. use a damp rag and soap and water. The separation pad mite need replacement. that's the device below the paper.in the document feeder. where the paper goes in.

Feb 24, 2014 | Konica Minolta Bizhub C253 With Document...

1 Answer

Multiple pages feed when printing on hp 7410


  • If the automatic document feeder (ADF) does not pick up any pages at all, the rollers inside the automatic document feeder need to be cleaned.
  • If the automatic document feeder picks up multiple pages instead of single sheets, the separator pad inside the automatic document feeder needs to be cleaned.
SolutionLoad one or two sheets of unused plain white full-size paper into the document feeder tray, and then press Start Copy Black to pull the pages through the automatic document feeder. The plain paper releases and absorbs residue from the rollers and separator pad.note.pngNOTE:If the automatic document feeder does not pick up the plain paper, try cleaning the front roller. Wipe the roller with a soft lint-free cloth dampened with distilled water. If the problem persists, or the automatic document feeder does not pick up the plain paper, clean the rollers and separator pad manually. Follow the procedures below to remove the face plate from the front of the automatic document feeder, access the pick assembly inside the automatic document feeder, clean the rollers or separator pad, and then reattach the face plate.

Please Click on this link to know more in detail.

Thanks

Apr 01, 2012 | HP OfficeJet 7410 All-In-One InkJet...

3 Answers

Automatic document feeder pulls paper through only part way


You need to replace the document feeder motor the gears on the motor shaft are split and slipping. New motor is 12.72 at http://www.compassmicro.com/parts2.cfm

Jun 03, 2010 | Epson Artisan 800 All-In-One InkJet...

1 Answer

The feeder takes several sheets at a time. How do


Hi,

When ever you face such type of issue, the Scanner will display U-2 error with the Red led blinking and the TWAIN display will be "The multi feed is detected.(Code DS32006)".

To resolve the issue, please follow the steps provided below:

#Check if the documents satisfy paper specification? Please refer to the Operator’s Guide for paper specification, paying
attention to the following points:

• Is there any print within 10mm x 10 mm square in the center of documents on the top?
• Is multi feed error detected by paper length when scanning documents with different length?
• Is there perforation in the center of documents?

#Check ADF and clean pick roller, Pad ASY and around DF sensor with care.

#Replace Pick roller and Pad ASY and see if the error is removed. Check the consumable counter from the TWAIN driver screen. When the counter exceeds the permitted values, replace Pick roller or Pad ASY. If the error still occurs, confirm that the cable is correctly connected then replace the sensor.

Hope the above information will be helpful.

Please revert if you have further queries.

Thanks & regards,

TechSatya

May 06, 2010 | Fujitsu fi-5120C

2 Answers

Top paper feeder roller rotates but does not draw in the paper


There is no replacement rollers available so, printer needs to be replaced.

Apr 08, 2010 | HP OfficeJet 7310 All-In-One InkJet...

1 Answer

The feeder does not feed correctly. Always jammed up


look for debris in the feeder i.e. paper clips, staples them take some windex on a paper towel and wipe all tires you can see and the lil white or grey pad{when you open the top of the feeder}

Jan 26, 2010 | Canon imageRUNNER 2200

1 Answer

The copy paper feed misaligns and jams, what's the fix? Jack


to fix misalign and paper jam problem, follow this steps.

Load one or two sheets of unused plain white full-size paper into the document feeder tray, and then press Start Copy Black to pull the pages through the automatic document feeder. The plain paper releases and absorbs residue from the rollers and separator pad.
NOTE: If the automatic document feeder does not pick up the plain paper, try cleaning the front roller. Wipe the roller with a soft lint-free cloth dampened with distilled water.

If the problem persists, or the automatic document feeder does not pick up the plain paper, clean the rollers and separator pad manually.

Follow the steps below to clean the rollers or separator pad.

1.Lift the cover of the automatic document feeder. This allows access to the rollers and the separator pad.
2.Lightly dampen a clean, lint-free cloth with distilled water, then squeeze any excess liquid from the cloth.
3.Use the damp cloth to wipe any residue off of the rollers or the separator pad.
4.Close the cover of the automatic document feeder.
This should solve the problem. Cheers!

Apr 25, 2009 | HP Officejet 6310 All-In-One InkJet...

1 Answer

ADF problem


Hi,
Thanlk you for contacting Fixya.
To resolve the issue, please follow the steps provided below:
#Check if the documents satisfy paper specification? Please refer to the Operator’s Guide for paper specification, paying attention to the following points:
• Is there any print within 10mm x 10 mm square in the center of documents on the top? • Is multi feed error detected by paper length when scanning documents with different length? • Is there perforation in the center of documents?
#Check ADF and clean pick roller, Pad ASY and around DF sensor with care.
#Replace Pick roller and Pad ASY and see if the error is removed. Check the consumable counter from the TWAIN driver screen. When the counter exceeds the permitted values, replace Pick roller or Pad ASY. If the error still occurs, confirm that the cable is correctly connected then replace the sensor.
Hope the above information will be helpful.
Thanks & regards,
TechSatya

May 28, 2008 | Fujitsu M3093GX Flatbed Scanner

1 Answer

Top feeder won't work properly


hello!

have you tried cleaning the separator pad inside the automatic document feeder?

try to Load one or two sheets of unused plain white full-size paper into the document feeder tray, and then press Start Copy Black to pull the pages through the automatic document feeder. The plain paper releases and absorbs residue from the rollers and separator pad.

If the problem persists, clean the rollers and separator pad manually

May 07, 2008 | HP Officejet Pro L7680 All-In-One Printer

Not finding what you are looking for?
Fujitsu fi-5120C Logo

4,608 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fujitsu Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

5059 Answers

Tony

Level 3 Expert

2600 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Fujitsu Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...