Question about Epson AcuLaser C3000 Printer

1 Answer

Hi. Epson C3000 aculaser. It is ghosting on only on black at a pitch of +/-62mm and also printing horizontal black smudges across both side of the paper at a pitch of +/- 25mm. I have totally cleaned the machine and have replaced the toner with Epson original. Any help would be appreciated. Many thanks in advance.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Hi Colin.

I just have had the same problem with my Aculaser C4200.
I may have found a way to solve you problem.
Just print 10 blank (without anything), and after that i took all toner's, the fuser etc. and put it back again. Printed 10 more blank pages, and printed over 200 pages with lot of tekst and colour (think that 50 pages could do it).
After 2 days everything is still ok for me.

Posted on Oct 07, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi when I print out in colour on the epson aculaser c1100, I get a smudge of yellowish pale colour on the right handside of the paper how do we fix this problem


Click here for the manuel. It will walk you through cleaning the cartriges. In most cases using the built in self-clean will take care of the smudge. You can also try removing the cartige and cleaning it and the housing with a damp q-tip or cotton swab.

Jun 07, 2011 | Epson Aculaser C1100 Printer

1 Answer

Paper jams regularly on Epson Aculaser C3000. Had to update firmware a while ago. Now that problem has returned I tried to run the latest update (NVMUpdate_10106.exe) but get error message that dll...


I had the same problem. Update program is most likely not designed for Windows 7. I've launched it in Windows XP (SP3) compatibility mode and it did the work just fine.

Oct 14, 2010 | Epson AcuLaser C3000 Printer

1 Answer

Too much toner on paper which then smudges


Try reducing the print resolution using the menu buttons. Does it smudge with coloured prints? If so then the fuser unit is faulty. If it is only black that smudges it is likely to be the K Developer unit. Ensure that you are using genuine toners, not refills or third party as the quality of toner can cause similar results.

Jan 14, 2009 | Epson Aculaser C1100 Printer

1 Answer

Paper Jam at A but nothing there


If you clear the jam and close the machine up again, does the print job eventually print OK. You may have to clear the jam several times before the machine prints it successfully. After the first successful print, does the machine then print ok, until the next time it is left idle for some time? If this is the case, I have a fix for you

Nov 07, 2008 | Epson AcuLaser C3000 Printer

2 Answers

Epson aculaser c9100 error code Eo86


After a repair person came and worked on the Epson Aculaser CX11NF, I have vertical line, full lenght across every printed page

Oct 08, 2008 | Epson AcuLaser C1900 Printer

1 Answer

Epson C1900 "ghost " images


Sounds like the transfer roller or the fuser unit may be faulty. Look at the fuser to see if the roller surfaces are dirty. If so, replace the fuser.

Jul 20, 2008 | Epson AcuLaser C1900 Printer

3 Answers

Papaer will not feed


High ITConsult And MarkoP

The high pitched whine and the paper stopping just before the fuser (the hot) unit is a known issue on the C3000 and C4100. If you are still searching for the solution to this issue, let me know, as I now have a working fix for the problem.

Reply to this post for further info.

Jul 10, 2008 | Epson AcuLaser C3000 Printer

1 Answer

Colour smudges


try cleaning the print head and also see this post on the photoconductor
http://www.fixya.com/support/t241840-smudges_color_printing_black_ok

Jan 23, 2008 | Epson Aculaser C1100 Printer

1 Answer

My EPSON Aculaser C3000 is ghosting


Could be any of the following:
* Bad toner - try a different toner
* Unsuitable paper - try a different paper
* wrong software drivers - download the latest drivers for your operating system from the manufacturer's site.

Jan 04, 2008 | Epson AcuLaser C3000 Printer

Not finding what you are looking for?
Epson AcuLaser C3000 Printer Logo

285 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18402 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...