Question about Miele 24 in. Incognito G843SCVi Built-In Dishwasher

2 Answers

My dishwasher says that it needs salt what sort of salt and how much?

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Miele Master
  • 12,061 Answers

HOW MUCH SALT DO I NEED TO ADD?


my dishwasher says that it needs salt what sort of - shim.gif
shim.gifYour machine may have a float indicator or a warning light to tell you when salt needs adding to the water softener. Often float indicators are difficult to see, and there is no accurate guide as to how much salt you need to add. Quite simply, just add granular salt to the reservoir until it won't take any more!


The softener will use the salt to replenish itself each time you wash. As an approximate guide, you should do a full top up about once a month. If your machine doesn't have a warning light, a good way to remember to check and / or top up is to do it on a regular day of the month (e.g. the first Saturday or the 15th)

CAN I USE ORDINARY TABLE SALT?

No. Table, cooking, rock and sea salts may contain additives that can actually increase water hardness. Also, the fine consistency of some of these salts mean they are likely to clog when wet. Always use granular dishwasher salt because it is very pure and is the right consistency for use in your machine.

Granular salt is the ONLY type of salt that should be used to regenerate the softener. Be aware that some varieties of 'dishwasher salt' use Dead Sea salt. This variety may contain minute insoluble organic matter that may adversely affect the resin within your softener over time. If you are in doubt about the origins of the salt, ask the retailer or manufacturer.

Posted on Sep 30, 2010

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 269 Answers

This is just to let you know that the internal water softener needs water-softener salt.

If you do not use the softener (I do not at my house) then the light serves as a convenient on/off light.

Posted on Apr 02, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Do you need to put salt in the dishwasher. If using tablets detergent ...where to put it ?


A lot of dishwashers do not have salt dispensers. If it does, the salt is added to a container which has a lid on the base (floor) on the inside under the bottom basket. Unscrew the lid and add the salt. Use normal pool salt. It is the same as "special dishwasher salt" that you pay a lot for. When full, the salt will last for 12 to 18 months. Most machines that have a salt container, also have a warning light on the panel to let you know it needs refilling. Dishwasher tablets do not add salt to the machine. Make sure you wipe up any salt that you may have spilt on the base of the machine, it will stain or rust the cabinet.

Sep 25, 2014 | Dishwashers

1 Answer

Dishwasher salt beko


Rinse aid and salt are not necessary if you use powder that is similar to the tablets. The lights are warning you that you havent added them, you know that so ignore the lights. If you live in a hard-water (limescale) area salt can be used as well as tablets or powder to make the water kinder to the machine, but most people just use tablets without rinse-aid or salt.

Dec 14, 2013 | Dishwashers

2 Answers

Where do i put the salt


Hello Maria,

The salt goes in the salt compartment in the base of the washing compartment. Unscrew the lid of the salt compartment (counter-clockwise), pour in salt until the compatment is full or nearly full then screw the lid back on firmly, but do not overtighten it.

belectric_138.jpg
If the dishwasher is new and you are using it for the first time, pour about 1 litre of cold clean water into the salt compartment before adding the salt. If you spill any salt or the water spills over the top of the salt compartment, it will wash/drain away the next time you use the washer.

The most important thing is to only use dishwasher salt. The salt is used for water-softening and only salt sold specifically for dishwashers can be used for this purpose.

The picture above is from a Bosch dishwasher. You may have another brand or model of dishwasher, but the salt compartment will still be in the base of the washing compartment and will have a cap which you unscrew as above.

Hope this helps. If you need further assistance, please let me know the brand and model number of your dishwasher.

Regards,
BElectric

Mar 14, 2011 | Dishwashers

1 Answer

ADP242 model- there is a limescale type residue especially on stainless steel pots etc. I have added salt but it seems to have made little difference. Can you suggest anything to sort out the problem


Hello,
It sounds like you are using too much salt,the white residue is normally from overdosing,especially if you are using the tablets as they have salt and rinse aid already in them.

Hope this helps.

May 17, 2010 | Dishwashers

1 Answer

Flashing lights on Hotpoint FDL570 Dishwasher


I had an identical problem with the salt and rinse aid lights on the left and the drying and end lights on the right flashing shortly after switching the dishwasher on. When I pulled it out, as this was the only way to look at the pipework, I noticed a big kink in the water hose. Removing this and obviously sorting out the flow problem has resolved the issue.

Mar 20, 2010 | Dishwashers

1 Answer

What kind of salt do I buy for use in the Danby DW?


Hi there,

Well Dishwasher salt is a particular grade of sodium chloride salt, and is used for recharging the built-in ion-exchange resins of the water softener in dishwashers that have a built-in water softener. The salt particles are larger than the size of table salt particles, and dissolves slowly enough that it will not clog the softener unit. This salt does not have added iodide salts, and it should have minimal amounts of iron and manganese salts. Some dishwasher detergents are marketed as not needing dishwasher salts. These detergents use higher levels of phosphate that increases the solubility of hard water ions. Never use table salt or detergent in the salt compartment of your dishwasher as this will damage your water softener unit. You can purchase the dishwasher salt from the below link -

http://www.mysupermarket.co.uk/grocery-categories/Dishwasher_Salt_In_Tesco.html

Good Luck!!

Thanks

Jan 07, 2010 | Danby 17 in. DDW1802W Designer Series...

1 Answer

Where do I add the salt in the dishwasher


Hi,

Before i provide you with the solution, Read the below one :-

CAN I USE ORDINARY TABLE SALT?
No. Table, cooking, rock and sea salts may contain additives that can actually increase water hardness. Also, the fine consistency of some of these salts mean they are likely to clog when wet. Always use granular dishwasher salt because it is very pure and is the right consistency for use in your machine.
Granular salt is the ONLY type of salt that should be used to regenerate the softener. Be aware that some varieties of ‘dishwasher salt’ use Dead Sea salt. This variety may contain minute insoluble organic matter that may adversely affect the resin within your softener over time. If you are in doubt about the origins of the salt, ask the retailer or manufacturer.

Now, look at the Video :-

http://www.videojug.com/film/how-to-load-a-dishwasher-for-the-best-results

The steps also include where you need to add Salt in the Dishwasher.You need to be careful with the amount. On few dishwashers, you would have an indication light. Make sure that it should be appropriate.

Let me know, if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Nov 07, 2009 | Siemens Dishwashers

1 Answer

Water is not going into the machine - and yes the water is on


There is a heating element in the dishwasher that heats the water to about 155F at which point a thermostat closes and sends power to the timer to advance. If the water does not reach this temp, the dishwasher will not advance. Often the problem lies in a faulty part in the heating circuit like the heating element or the thermostat but you will need a technician to verify.

http://tclaundryrepair.com/

Feb 20, 2009 | Neff 24 in. S5443X2 Built-in Dishwasher

3 Answers

Indesit IDL 40 Slimline flashing lights


the problem you have got with the flashing lights is that its the rinse aid or in need of more salt, hope thats sorts it for you

Dec 12, 2007 | Indesit 18 in. D41 Slim-Line Free-standing...

Not finding what you are looking for?
Miele 24 in. Incognito G843SCVi Built-In Dishwasher Logo

1,271 people viewed this question

Ask a Question

Usually answered in minutes!

Top Miele Dishwashers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5159 Answers

Mike

Level 3 Expert

4340 Answers

Are you a Miele Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...