Question about Epson DLQ 3500 Matrix Printer

Open Question

Paper out and pause led glowing after one line printing data

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
TerryTown
  • 292 Answers

SOURCE: hp 3005X PAUSES BETWEEN PRINTING EACH PAGE. Data

Thank you for contacting FixYa for your printer inquiry.
We have had this problem before. If you install the driver from the hp site, the dot4 port is not installed properly. We had to clean all the dot4 entries out of the registry and install the printer from the cd.
Remove Dot 4 Port Steps:

  1. Click "Start" and then right-click "Computer." Click "Properties" on the pop-up menu.
  2. Click the "Device Manager" link on the left side of the new window.
  3. Double-click the "Ports" sub-heading in "Device Manger." Highlight a USB port that includes "DOT 4" as part of the device description. Right-click on the port devices name, and then click "Uninstall" on the pop-up menu.
  4. Uninstall other existing "DOT4" ports using the same method.
  5. Restart the computer and log in to Windows.
  6. Reinstall the driver software that came with your printer's CD.
The printer now functions properly in Windows.
USB problems are usually fixed by reinstalling the driver, just reboot the machine.
Better still hook the machine up to a LAN this is a network printer.

Hope this helps. Don't forget to rate this printer solution.
TF

Posted on Jun 13, 2011

Ad
bartech9
  • 155 Answers

SOURCE: Hi!! I have a strange issue,

p layre cass: This is a mainboard error. You must have to change it. Try also change the mainboard battery.

Roberto Martinez
padrino99@prodigy.net.mx

Posted on Aug 28, 2011

lukmonojack
  • 4 Answers

SOURCE: Printer doesn't accept the paper,power led only glow

It's onboard failure message(eeprom, rom, or microprocessor), just replace your mainboard and calibrate the machine. It solve the problem, perhaps.

Posted on Aug 03, 2012

pradipyeole1
  • 1 Answer

SOURCE: Printer doesn't accept the paper,power led only glow

PLQ20 passbook printer is not accepting passbook or another paper

Posted on Apr 08, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi i have a zebra 170xi4 printer. the printer does not boot(Blank display). power, pause, error, data LEDS are glowing


unplug it, open the side cover and check for broken or disconnected wiring plugs. make sure any wires are not touching the belt pulleys

Apr 23, 2018 | Zebra Office Equipment & Supplies

2 Answers

Do not my printer initialize & red light glow


LP-365W On Line LED Is Solid Red - samsung product ...

support-us.samsung.com/.../pop_troubleshooting_fr...

Samsung ElectronicsImportant: Before you perform any type of service on your printer that requires you to... Any of these conditions can cause the On Line LED to glow solid red:.

On Line LED Is Solid Red

support-us.samsung.com/.../pop_troubleshooting_fr...

Samsung ElectronicsDec 2, 2014 - Important: Before you perform any type of service on your printer that ...Any of these conditions can cause the On Line LED to glow solid red:.

Samsung ML-3561N Laser Printer Initialize - Questions - Fixya

www.fixya.com > ... > Samsung > ML > Samsung ML-3561N Laser Printer
ML-2570 Samsung printer having problem orange LED is blinking ... initializing stage green LED glows continuosly,After initializing Printer green LED turn into ... the red light remains on when i switch on the printer.. and it doesnt initialize the ...

Samsung glow plug Printers & Copiers Questions ... - Fixya

www.fixya.com > Forum > Tags > glow plug > Printers & Copiers
Printer Problems...red status light glowing I bought a Samsung CLP-310W a ...Samsung printer having problem orange LED is blinking in initializing stage ...

Reset for Samsung ML-1660 ' FixYourOwnPrinter


Dec 19, 2015 | Samsung ML 1610 Laser Printer

2 Answers

I own a ML-2525/XAA and have a blinking light on the right hand side of the unit. It looks like: <--->/(a triangle with an explanation mark inside it.


Per your user manual, here is a list of all the LED status':

Jam (b-error.png)

Orange

On

A paper jam has occurred. (See Clearing paper jams.)

Online/Error (b-online.png)


Off

  • The machine is off-line.

Green

On

  • The machine is in power saver mode.

  • The machine is on-line and can receive data from the computer.

Blinking

  • When the LED slowly bilnks, the machine is receiving data from the computer.

  • When the LED rapidly blinks, the machine is printing data.

Red

On

  • The cover is opened. Close the cover.

  • There is no paper in the tray. Load paper in the tray.

  • The machine has stopped due to a major error.

  • Your system has some problems. If this problem occurs, contact your service representative.

  • A toner cartridge has almost reached its estimated cartridge life[a]. It is recommended to replace the toner cartridge. (SeeReplacing the toner cartridge.)

Blinking

  • A minor error has occurred and the machine is waiting for the error to be cleared. When the problem is cleared, the machine resumes.

  • Small amount of toner is left in the cartridge. The estimated cartridge life[a] of toner is close. Prepare a new cartridge for replacement. You may temporarily increase the printing quality by redistributing the toner. (See Redistributing toner.)

Feb 28, 2011 | Samsung ML 2525 BW laser Printer

1 Answer

Power went off when I tried to print


Would be helpful to know which operating system you are using and whether there where any warning light flashing. For starters review the following solutions.
Printer Does Not Start or Stops During Print Jobs

Inner Cover was open when you started printing.

Close the Inner Cover and press the RESUME/CANCEL button on the printer. The printer resumes printing.

Inner Cover was opened while printing is in progress.

Close the Inner Cover and press the RESUME/CANCEL button on the printer.

A page of print data being sent at the time of the error will be erased, so print that page again.

The printer has been printing continuously over a long period.

If the printer has been printing continuously for a long time, the Print Head may overheat. To protect the Print Head, the printer may stop printing at a line break for a period of time and then resume printing.

In this case, interrupt your print session at a convenient time and turn the printer off for at least 15 minutes.

Additionally, if the printer has been printing graphics or photos with intense colors continuously over a period of time, the printer may stop printing to protect the Print Head. In this case, printing will not resume automatically. Turn the printer off for at least 15 minutes.

i_expl.gif Caution

The Print Head and the surrounding area can become extremely hot inside the printer. Never touch the Print Head or nearby components.

Out of paper.

Make sure that paper is loaded in the selected paper source.

Reload paper if no paper is found in the selected paper source (Auto Sheet Feeder or the Cassette).

If the same paper is loaded in the other paper source, you can switch the paper source with the Paper Feed Switch or the printer driver to continue printing.

If both paper sources have run out of paper, confirm the selected paper source and load paper there.

Printing documents with plenty of photographs or illustrations.

When the POWER lamp is flashing green, the printer or the computer is processing data. Printing large data such as photos or graphics takes time for the printer and the computer to process, during which the printer may appear to have stopped operating.

In addition, when printing data that uses a large amount of ink continuously on plain paper, the printer may pause temporarily. In either case, wait until the process is complete.

i_note.gif Note

If you are printing a document with a large printing area or printing multiple copies of a document, printing may pause to allow the ink to dry.

Dec 08, 2010 | Canon PIXMA iP4300 InkJet Photo Printer

2 Answers

My Brother HL-2140 Went out in a storm. All three lights just keep blinking no matter what I do. Held down on the blue light button a number of time, restarted computer, turned off printer, reloaded ink...


You can find the usre's manual here:

http://welcome.solutions.brother.com/bsc/public/us/us/en/doc/manual_index.html?reg=us&c=us&lang=en&prod=hl2140_all&dlid=&flang=English&type2=-1
1) If the LARGE BLUE BUTTON is blinking:
Data remaining in memory
There is remaining print data in the printer memory. If the Ready LED is blinking for
a long time and nothing has printed, press the Go button to print the remaining data
in the memory.
2) If the TONER LED is blinking:
Toner low
Indicates that the toner cartridge is nearly empty. Buy a new toner cartridge and have
it ready for when Toner life end is indicated.
The Toner LED will turn on for 2 seconds and off for 3 seconds.
3) If the DRUM LED is blinking:
Drum life end soon
The drum unit is near the end of its life. We recommend that you get a new drum unit
to replace the current one. See Replacing the drum unit on page 69.
The Drum LED will turn on for 2 seconds and off for 3 seconds.
4) If the RED ERROR LED is blinking:
Front cover is open
Close the front cover of the printer.
Fuser cover is open
Close the fuser cover located behind the back cover of the printer.
Paper jam
Clear the paper jam. See Paper jams and how to clear them on page 85. If the printer
does not start printing, press the Go button.
Memory full
The printer memory is full and the printer cannot print full pages of a document.
Print overrun
A print overrun occurred and the printer cannot print full pages of a document.

Mar 26, 2010 | Brother HL 2140 Laser Printer

1 Answer

Designjet 450c plotter


From the service manual:

Ready + Cartridges + Data: Mark Encoder not detected. Possible causes:

1. The line on the mark encoder is dirty or missing.
2. Faulty or badly connected trailing cable.
3. Faulty or badly connected carriage sensor.
4. Faulty or badly connected X-axis Encoder Cable.
5. The drive roller has shifted slightly from the expected position (mechanics). Check that the carriage sensor lights just over the white mark on the drive roller when starting.
6. Faulty carriage PCA.
7. Faulty X-motor.
8. Faulty Y-motor.
9. Faulty electronics module.

Jun 10, 2009 | Xerox Phaser 7750DN Laser Printer

2 Answers

Samsung ml 2010 r laser printer


Check your manual, there is a solution there or download the user guide from
this site below or read the information below.

http://downloadcenter.samsung.com/content/UM/200602/20060216163720484_ML-2010_English.pdf


LED pattern Possible Problems and Solutions
Your system has some problems. If this problem occurs,
contact your service representative.
On Line/Error LED
lights red
• Paper jam occurs. To solve the problem, see “Clearing
Paper Jams” on page 5.6.
• The front cover is open. Close the front cover.
• Paper tray is empty. Load the paper in the Tray.
• The toner cartridge is out of toner. Remove the old toner
cartridge and install a new one. See “Installing the Toner
Cartridge” on page 2.4.
• You pressed the Cancel button while the printer is
receiving data.
• In Manual Feed mode, there is no paper in the manual
tray. Load paper into the manual tray.
• If the printer is receiving data, the On Line/Error LED
slowly blinks green.
• If the printer is printing the received data, the On Line/
Error LED blinks green fast.

Jul 17, 2008 | Samsung ML 2010 Laser Printer

1 Answer

Printer ML2010 not responding


LED pattern Possible Problems and Solutions
Your system has some problems. If this problem occurs,
contact your service representative.
On Line/Error LED
lights red
• Paper jam occurs. To solve the problem, see “Clearing
Paper Jams” on page 5.6.
• The front cover is open. Close the front cover.
• Paper tray is empty. Load the paper in the Tray.
• The toner cartridge is out of toner. Remove the old toner
cartridge and install a new one. See “Installing the Toner
Cartridge” on page 2.4.
• You pressed the Cancel button while the printer is
receiving data.
• In Manual Feed mode, there is no paper in the manual
tray. Load paper into the manual tray.
• If the printer is receiving data, the On Line/Error LED
slowly blinks green.
• If the printer is printing the received data, the On Line/
Error LED blinks green fast.

Jul 15, 2008 | Samsung ML 2010 Laser Printer

2 Answers

LED BLINKING


Replace the communication cable (parallel cable).

Dec 11, 2007 | Epson FX 1170 Matrix Printer

Not finding what you are looking for?
Epson DLQ 3500 Matrix Printer Logo

Related Topics:

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Alun Cox

Level 3 Expert

2678 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...