Question about Juki DNU-1541 Mechanical Sewing Machine

1 Answer

I have a DDL-8300N industrial machine and I haven't been able to use it. The thread keeps coming out of the needle when I am sewing. Could someone please help?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 736 Answers

I am offering assistance because I see that in 10 minutes no one else has come forth to do so. Please do not be offended and I am sure you have already checked this but this happens to us when we haven't threaded the needle properly. I know that you know what you're doing and that you have been sewing a long time but please just triple and quadruple check your threading against the manual. If it comes to something being wrong with the machine the contact information for the manufacturer of your machine is
Juki Corporation
Marketing & Sales H. Q.
8-2-1 Kokuryo-Cho, CHOFU-SHI,
TOKYO 182-8655 JAPAN
Phone: (81) 3-3480-2357, 2358
Fax: (81) 3-3430-4909, 4914
http://www.juki.com

Hope this helps

Posted on Sep 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Juki 8300N


Dear Rosemarie,

Make sure you have threaded the machine from right to left, it sounds like the needle thread is trapped under the lower looper thread and cannot form a stitch.........start the threading over from scratch like this:

  1. Lower Looper
  2. Upper Looper
  3. Left Needle
  4. Right Needle
Is there a diagram for how to thread on the inside of the door ?

Follow that slowly and carefully to make sure you have not missed any thread guides on the way, as each one needs to be followed through to ensure correct tension and thread progression.

Cheerup and Be Happy always

Mar 27, 2008 | Juki DDL-8300

1 Answer

I am a swimwear designer and just got a juki ddl 8300n did I pick a good machine? How can I adjust the machine for a more stretchy stitch?! What number should my stitch dial be on to get a stretch?


Perhaps a manual would be helpful:

File JUKI DDL 8300N Instruction Manual pdf

You should probably contact the manufacturer with questions. Hopefully, you did some thorough research before purchasing this machine. From the info I found, it appears to be a straight stitch only machine. I don't know anything about this machine, but I would be hesitant to purchase a straight stitch machine for sewing swimwear. Usually, swimwear needs a stretch stitch or zig-zag capability. Just my thoughts...

Amazon com Juki DDL 8700 Industrial Straight Stitch Sewing Machine Arts...

Juki DDL 8300N Industrial Single Needle Lockstitch Sewing Machine with...

JUKI DDL 8300N Straight Stitch Industrial Sewing Machine With Table Lamp...

...

Nov 21, 2016 | Juki Sewing Machines

1 Answer

My juki 8700 h frays thread while trying to sew


Hello Daniel, I suggest you start with a new needle. Back off the needle thread tension and the bobbin thread tension to a minimum and see how it sews. If it does not ravel the thread, you can increase the tensions until you acquire the stitch you want.

Mar 26, 2014 | Juki DDL-8700 Industrial Straight Stitch...

1 Answer

I have a 2011 Juki DDL-8300N. Has always worked fine but while sewing on denim it suddenly seized up and stopped sewing. The needle is in the lowest postion through the jeans. I am unable to turn the


Your needle probably bent and got jammed. clip threads top and bottom of the fabric and remove... then get in the bobbin area and look for issues.

Sep 30, 2012 | Juki DDL-8300

1 Answer

The race and needle of my Juki 8300N is jammed. There was a thread caught but it's gone as far as I can tell now. The needle won't move even if I turn the wheel by hand - it can just barely jiggle...


douche the hook with oil wait a day and use hand force to get machine to turn. u have thread deep inside hook and its binding the machine. u can spray with wd-40 too but use alot and let it sit.

Oct 08, 2011 | Juki DDL-8300

2 Answers

Juki 8300N


you should try adjusting the needle hight, the tensioners, the bobbin rension, belt tensions.

Jan 28, 2009 | Juki DDL-8300

1 Answer

Question==>JUKI dnu 1541 or ddl 8300n


Might I be so bold as to disagree with Allmakes.
Why would a manufacturer build different models of industrial. They are designed for differnt jobs. The 8300 is a high speed garment machine, the 1541 is a compund feed upholstery machine. The motor is the same HP and does not affect the ability to sew heavy. The garment machine will sew garment weight leather just fine but you will have problems getting the fabric to feed properly particularly over seams. The other issure you may find with a garment machine is it's ability to handle heavier threads. I suggest that the 1541 would be a better choice for making bags and purses.

Jan 26, 2008 | Juki DNU-1541 Mechanical Sewing Machine

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Juki Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1129 Answers

Pete Alaniz

Level 1 Expert

13 Answers

Derek Massey

Level 2 Expert

92 Answers

Are you a Juki Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...