Question about Denon AVR-1905 Receiver

2 Answers

Denon AVR-1905 Receiver

I had to discount my speaker in the ceiling to clean them out as a few mice had decided to make home in and aroung two of the speakers. After cleaning I reconnected the the speakers just as they were prior. They ran for about 10 minutes then the receiver powered down and started blinking.

I checked the speaker connection a couple of times and am sure there is now aparent short.

The receiver will power up for about 5 seconds then it powers back off with the blinking light.

It is memorial day weekend and my wife is going crazy without her TV, any suggestions?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 163 Answers

Bad channel or a problem with the power supply. You may fix it at www.ebcelectronics.com

Posted on May 29, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi again,

Any new developments?

Posted on May 25, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

DENON -AVR-1905 when power on display appears " 1 FRONT LARGE " and nothing happens no button does not respond.what could be the problem ?


Dear friend. That means you have to use Large Front speakers with correct impedance The other four speakers are for rear and surround effects and they do not need to be large (or floor standing). Most effects will come from Front speakers. I suppose that this is the problem.
Good`Luck.
Flavio/BRAZIL

Jul 21, 2010 | Denon AVR-1804 Receiver

1 Answer

Denon avr-1909 crackling sound while watching Uverse HD.


It may may the the AT+T box is really not compatible with the AVR or the Pioneer.

Check the specs on those input/outputs for the Ubox and the receiver.
See if they agree. If so, try another hookup method like HDMI ( which carries the audio too)

Nov 05, 2008 | Denon AVR-1905 Receiver

1 Answer

Denon RC-978 remote... every button shuts receiver off


Drop the front panel of your receiver,there is ZONE 2 ON/OFF switch.
Good day!
solutiondoct

Sep 12, 2008 | Denon AVR-2807 Receiver

1 Answer

DENON AVR-1905 centre channel dropout


I have seen this a few times. Try resoldering the pins on the voltage regulators. If you are not comfortabel with that, bring the unit to a service shop and report the problem as intermittant. Have them resolder the regulators and the surround output amp chips. This should cost only a minimal labor amount. That may resolve the problem. If not, then we'll need to look into the surround processing circuitry.
Dan

May 08, 2008 | Denon AVR-1905 Receiver

1 Answer

No sound on cable TV for Denon AVR 1905 Receiver



Audio setup on the TV, needs to be swited to Fixed or both, this is usually the same on all T.V.s....


Jan 20, 2008 | Denon AVR-1905 Receiver

1 Answer

How to hook up xbox to denon avr1905?


I've hooked up an xbox to the front aux jacks with no problems. you can change the device to use the aux through the selector knob.

Jan 06, 2008 | Denon AVR-1905 Receiver

Not finding what you are looking for?
Denon AVR-1905 Receiver Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Denon Audio & Video Receivers Experts

 Elex
Elex

Level 2 Expert

49 Answers

jonpoint

Level 1 Expert

4 Answers

Tech Leprechaun
Tech Leprechaun

Level 2 Expert

61 Answers

Are you a Denon Audio and Video Receiver Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...