Question about Maytag Neptune MDE5500AY Electric Dryer

2 Answers

Control panel lights are on, but when you push the on button, nothing happens.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Maytag Master
  • 17,129 Answers

Possible failure of the control panel, it seems that the processor is not working and needs to be checked to confirm, check the power to the mP IC , check if the regulator is working. Check if the mP is oscillating to confirm the action, check the pads if contacting.
The fault can be the control pads or the mP.

Posted on Sep 30, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Maytag Master
  • 43,501 Answers

Hi,

There can be many reasons why your dryer will not start or turn...

The most common causes are the belt breaking or jumping off, or the motor goingbad...

Here are a couple of tips that I wrote will help you to figure out why yourdryer will not run...

Dryer Repair - The Dryer is not Turning

Dryer Repair - The dryer will not start


heatman101

Posted on Sep 30, 2010

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: My maytag neptune dryer won't start. The control

control panel dont light up wont start

Posted on Feb 03, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When I push the start button on my dishwasher, the "hold 3 sec" light blinks but nothing happens and no other buttons work.


It sounds like the control panel is locked. See if one of the buttons says lock and hold it down for at lest 3 seconds. If the control is locked, that should unlock it. Its a child safety feature.

Apr 22, 2015 | Dishwashers

1 Answer

The climate control on my 2001 jaguar s type does not come on no lights


Overheated??...has nothing to do with no lites on.Check your fuses 1st worse case is fried control panel.heat coming out because climate system inop

Nov 19, 2012 | 2001 Jaguar S-Type

1 Answer

I have power but the lights and pumps do not work when I push the control panel buttons


When you unplug & reconnect the topside control what happens?
If nothing your control is bad, you'll need a new one.
They are typically attached with double sided tape so removal is easy.

Nov 12, 2012 | Pool & Spa

1 Answer

Push start button the lights go on and nothing happens


theres a start relay in the main control panel inside that is freqently going out!! you can look for a relay however is just as easy to change the control panel circuit board

Jan 13, 2010 | GE 24 in. GLD5560LSS Stainless Steel...

1 Answer

Control Locked


Locking controls
The Control Lock prevents unintended use of the washer. You
can also use the control lock feature to prevent unintended cycle
or option changes during a cycle. When CONTROL LOCKED is
lit, all buttons are disabled. You can lock the washer while it is
operating.

To lock the controls
Select and hold END OF CYCLE SIGNAL for 3 seconds.
The CONTROL LOCKED status light glows.

To unlock the controls
Select and hold END OF CYCLE SIGNAL for 3 seconds until the CONTROL LOCKED Status light turns off.

Oct 23, 2009 | Whirlpool Duet GHW9150P Front Load Washer

1 Answer

I just finished cleaning my swimming pool and tried to switch on the water pump but nothing happened.Then i noticed that the red trip light on the control panel was on. What do i have to do to fix this?


hi! there,
open the control panel,besure to close circuit breaker first,on control panel there is a over load protection relay,push the reset lever,then close the control panel,switch on the breaker and push the black push button to start the pump,observed if trip off again,check the cathridge filter,replace filter because the differential pressure
was exceeded the set up on pressure switch.have a nice day,don't forget to rate me,thank's

Apr 23, 2009 | Home

1 Answer

Miele g898 sci plus won't start (type HG01)


Button wont stay in - lights up but nothing happens. Machine three and a half years old.

Dec 23, 2008 | Miele Premier-Plus Built-in Dishwasher

2 Answers

Maytag dishwasher, no power, then flashing lights, now no power.


Had the same problem, removed the kick panel to find a set of instructions under the insulation, had to push a sequence of the panel buttons, its been running great for a couple of weeks now!
Jeff

Dec 23, 2008 | Maytag MDB7100AWB Dishwasher

1 Answer

My LG remote control is not working


Make sure you push the TV button on the top of the remote before you push the power on button.

Dec 17, 2008 | Televison & Video

Not finding what you are looking for?
Maytag Neptune MDE5500AY Electric Dryer Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3072 Answers

yadayada
yadayada

Level 3 Expert

75077 Answers

Are you a Maytag Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...