Question about Danby Silhouette DWC512BL Wine Cooler

1 Answer

The whole thing went dead, even the digital tempurature display.

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert that has over 500 points.

  • Expert
  • 270 Answers

Since everything went out, I would first test the outlet. Get a lamp and plug it in to see if the outlet is still active. Take the appropriate action if there is no power (check circuit breakers)
(p.s. Circuit breaker ONLY TRIP when you exceed the current load for that breaker)

If the out let is good (the light turns on) then:
Based on the reading of the owners manual, I did not notice any incident or mention of a fuse or power protection. Due to the sensitivity of wines , I am nearly positive this is an omission in the manual.
If you can get to the back of the unit, look around the power cord area to see it there is a fuse port. If there is a rocker switch to turn it on, the fuse may be in the switch.
this is your manual:

Hope that helps

good luck and don't forget to vote!!!

Posted on Sep 30, 2010


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

I went to turn on the camera and it started to come on and the went off

without the info from you camera is hard to tell, but from experience with another cameras it is most probably the battery is dead, it does not have enough charge to initialize the whole thing so it comes on but as soon as everything kicks up voltage drop and camera goes off again to restart.
Try recharge battery, test battery, another battery, it all depends on what type of battery and what you have.

Nov 01, 2015 | Cameras

1 Answer

Battery went dead and now with the new battery instaled the radio will not come on. someone suggested a security code may be needed

If the radio requires a security code it will display code with - - - or - - - - so either a 3 digit or 4 digit code will be required, does it do this or does it not even power on?

Aug 13, 2010 | Audio Players & Recorders

1 Answer

Well the whole thing is touch screen so there are only two buttons on it. I accidentally dropped it and it went into shock but then came back and everything was fine. About a month after that the touch...

the touch screen is damaged by that shock. you can change that display. take your camera to a nikon repairing will help you to locate the nearest repairing center.

Jun 11, 2010 | Nikon COOLPIX S230 Digital Camera

1 Answer

Tempurature Goes Up

sounds to me like your thermostat is bad

Jul 10, 2009 | GE Q Series GSS25QGT Side by Side...

1 Answer

Camera will not power up changed battery just went dead Nikon D70

Are you getting any power from it? How about an error message?

Try blowing some compressed air into the battery chamber. There might be some debri or dust in there. Try replacing the battery to see if that solves it. (Someone you know must own a D70).

Apr 20, 2009 | Nikon D70s Digital Camera

1 Answer


Tried the tiny reset button? I was pissed till I found that and I re-initialized the whole thing. Now everything works great. (Might have to rdownload firmware "ZENMozaic_PCFW_122_1_06_01.exe' from Creative site but worked great for me.)

Back up all and re-install.

Apr 11, 2009 | Creative Labs ZEN Vision:M Digital Media...

2 Answers

It dosent turn on

i have the same problem. i bought new rechargeable batteries and they went dead really fast and then i put some new batteries in and i took like 5 pics and then the battery indicator said the battery is low. i dont get it whats going on with this camera.

Jan 05, 2009 | Kodak EASYSHARE Z1285 Digital Camera

1 Answer

I have 2000 ford f250 and the compass, temp, sensor screen on the headliner went blank. Is this just a fuse or is the whole thing bad.

The overhead console is quite prone to internal failure. Dim, intermittent, or dead displays are a common symptom of an internal failure. We offer a reasonable repair service with a lifetime guarantee. Check it out:

Dec 27, 2008 | 2000 Ford F250 Super Duty Crew Cabs

1 Answer

PB6110 Powers down after 30s, splash screen appears, red temp lig

Be sure to check the filters and make sure you have good airflow thru the proj. Cleaning filters solved our temp shutdown problem.

Nov 17, 2008 | BenQ PB6110 Multimedia Projector

1 Answer

My Bissel stopped working and have no clue why?

Try Bissel .com, maybe you can download a manual from there. But if it just quit, the cord maybe bad. Alot of times if you unplug the cord by pulling on the cord rater then the plug, you cause the wire to eventaully break. That would be the first thing I would check. ( I am assuming that your vac just went completely dead.)

Dec 02, 2007 | Bissell 3594 CleanView PowerTrak Bagless...

Not finding what you are looking for?
Danby Silhouette DWC512BL Wine Cooler Logo

Related Topics:

230 people viewed this question

Ask a Question

Usually answered in minutes!

Top Danby Furniture Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Charles T Nevin
Charles T Nevin

Level 3 Expert

4066 Answers

Dennis Boxerman

Level 3 Expert

1151 Answers

Are you a Danby Furniture Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides