Question about Sony KDL55HX800 55 in. TV

Open Question

Automatic software update setting for TV indicates it does so in standby mode. Yet nowhere online or in a printed manual does it state how to physically put the TV in standby mode. So how can I get the TV in standby mode for an automatic firmware update [as advertised]?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
fellowesrep
  • 102 Answers

SOURCE: Automatic Shredding

I personally work with Fellowes brand shredders, but it sounds like you have a paper feed sensor issue. This may be a mechanical or electronic sensor located in the center of the paper feed slot. If it is electronic it may just need cleaning(qtip dipped in rubbing alchohol. If it is a mechanical sensor check to make sure it has not been broken or it may be stuck because of paper that has become wedged behind it(you may need to jiggle the switch a few times to free it). If none of this works you may have a burned out switch or a bad pc1.gif board, contact manufacturer for more info.

Posted on Mar 02, 2008

Ad
  • 51 Answers

SOURCE: The tv turns off automatically & standby light blinks 4 times

4 blinks is bad backlight inverter. Download the service manual here:

http://rapidshare.com/files/208591107/KDL40S2000_L5_sm.pdf

Posted on Aug 22, 2009

  • 11 Answers

SOURCE: Standby mode

I have the same television. Mine would shut off and turn back on every 30 seconds. Even though the LAMP light wasnt coming on in the front of the set, I replaced the lamp with a factory Sony lamp and have had no problems since. The sets picture is beautiful and I have had no problem since.

Posted on Nov 05, 2009

tvhelp-Dave
  • 178 Answers

SOURCE: TV on Standby

There is a Sony S3000 protect blinks table:ebf219b.gif

Posted on May 28, 2010

taran_2005
  • 10515 Answers

SOURCE: My Sony LCD TV Model KDL-46VL150 will go to

Hi,

This isn't good. A 6 flash shut down means there is a problem with the backlights inside the panel.This TV was initially introduced in Oct 2009. If you might have bought the TV within last year or so, try to call Sony and check, if they would repair this without any fee unless this would be an expensive repair. This is really common problem on this set and reported many times.

BAD NEWS - Even though it is a problem with backlight inside the panel, it cannot be replaced alone. The complete panel has to be replaced.

The only option i could suggest is to contact Sony and urge for repair.You need to tell them that you are aware that this is a common problem on this set and there is a probability they could repair the TV and charge you only for parts. This is the only possible resolution. I always urge all the people who bought these technologies to buy extended warranties to avoid these situations.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Posted on Feb 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Zanussi tv led zn32z6000 firmware please ???


Most smart TV update their firmware online when on the internet.
There is no file as such to download and apply from outside.

On my LG smart TV it is
Settings > ? > Software Update > Check Update Version
It displays if there is an update available or
it displays the current version and
I can also checkmark Automatic update mode
UPDATING YOUR FIRMWARE

Sep 08, 2016 | Televison & Video

Tip

Hitachi 22HXJ06U stanby LED flashing red and blue.


Recently first thing in the morning I've found my tv power on / standby LED is flashing red and blue. The tv does not seem to respond to the remote...but after pressing remote on key the tv will eventually come on about 3 to 5 minutes afterwards. It would seem that the tv does an auto update during the early hours and then on next switch on it completes the update...during which time it seems that it has not turned on. To prevent this annoying behaviour you can disable the automatic software updates in the settings menu... see pdf user manual at https//estadoc.hitachi.eu/servlet/FileViewer?DocumentName=22%20IB.pdf see page 23 about software upgrade. In the settings options you can disable the auto upgrade. Occasoinally I expect it would be advisable to either enable the auto update for a day or two or do manual update.

on May 02, 2015 | Televison & Video

2 Answers

What does it mean when your tv states standby and you cannot turn it on or off with the remote control?


How to Fix a Sony Plasma TV With a Standby Problem ...

smallbusiness.chron.com > Finances & Taxes > Other Finances & Taxes
A standby mode problem on your plasma TV can result in the TV being stuck instandby mode, ... You can troubleshoot a standby mode error by performing a power cycle or restoring the TV to its factory settings. ... Turn the television on. ... What Does It Mean When My Rumor Touch Says the Camera Is in Standby Mode?

tv on standby mode cant get it off - TV - Streaming Video & TVs

www.tomsguide.com/answers/id-1676193/standby-mode.html

Dec 27, 2015 | Televison & Video

1 Answer

Please help with the following: Printer BIXOLON SRP 350 IG When I turn it on Power light: Green Error light: Red Paper light: Red The printer "beep ... beep" continously


Looks like you'll have to contact Samsung http://www.samsungminiprinters.com

The operators manual does not give any indication about what to look for if the error light is on.

Here's what the manual states about the paper light:
This light indicates the near end of the paper roll. Install a new paper roll and the printer will continue printing. When the light blinks, it indicates the self-test printing standby state or macro execution Standby state when the macro execution command is used.

Jul 18, 2011 | POS X BIXOLON Samsung Kps SRP350 Thermal...

2 Answers

Define "standby" mode.


Hello,

The standby mode is a power saving feature. In this mode, a it does not shut down completely, just goes to low power state and so it consumes less power. When it resumes from the standby mode, full power is restored.. During the standby mode, if the power supply is disconnected or interrupted, data might be lost.

Hope this helps,

Lucas

Jul 08, 2011 | Uniden CEZAI998 Phone

1 Answer

The screen is lite but not playing music won't turn on or off , what to do ?


Recovery Mode: download the update software and install then lock your sansa hold in the rec key on the left at the same time push the menu/power button this will take you to recovery mode then connect to the computer Start the update software if it doesn't start automatic goto /start /all programs /Sandisk/sansa updater/ sansa updater and start it up manually... follow instructions on the updater and the sansa. http://www.youtube.com/watch?v=_95hLqZxCHc&feature=related here is a link to a kid showing you how to goto recovery mode.
Update software from this link..
(http://mp3support.sandisk.com/sansa/Installer/1082/SansaUpdaterInstall.exe)
and install the software before you recover
RESET: Go into the settings and scroll down to reset all, push center button, scroll to yes, push center this will restore factory settings.....
Reset All
NOTE: THIS IS AN ADVANCED OPERATION AND RESTORES ALL SETTINGS
TO THE FACTORY DEFAULTS. NORMAL USERS ARE NOT RECOMMENDED
TO PERFORM THIS OPERATION!
If your device freezes up press the Menu button and hold for 15 seconds.
This is like a power down of the device. Once you perform the reset, the adjustments you made during last operation
will be gone.
This is what it states in the manual for the 260 sansa Page 29
Recovery Mode also resets system settings when unplugged...

Jul 01, 2010 | SanDisk Sansa e250 MP3 Player

1 Answer

Can't use


RESET: Go into the settings and scroll down to reset all, push center button, scroll to yes, push center this will restore factory settings.....
Reset All
NOTE: THIS IS AN ADVANCED OPERATION AND RESTORES ALL SETTINGS
TO THE FACTORY DEFAULTS. NORMAL USERS ARE NOT RECOMMENDED
TO PERFORM THIS OPERATION!
If your device freezes up press the Menu button and hold for 15 seconds.
This is like a power down of the device. Once you perform the reset, the adjustments you made during last operation
will be gone.
This is what it states in the manual for the 260 sansa Page 29
Recovery Mode also resets system settings when unplugged...

Recovery Mode: download the update software and install then lock your sansa hold in the rec key on the left at the same time push the menu/power button this will take you to recovery mode then connect to the computer Start the update software if it doesn't start automatic goto /start /all programs /Sandisk/sansa updater/ sansa updater and start it up manually... follow instructions on the updater and the sansa. http://www.youtube.com/watch?v=_95hLqZxCHc&feature=related here is a link to a kid showing you how to goto recovery mode.
Update software from this link..
(http://mp3support.sandisk.com/sansa/Installer/1082/SansaUpdaterInstall.exe)
and install the software before you recover

Jun 27, 2010 | SanDisk Sansa e250 MP3 Player

1 Answer

Tv went off while watching a program power standby red light blinks 6 times then pauses then repeats tried unplugging unit waiting a few minutes then replugged same results nothing. can anyone help me ?...


Here's an excerpt from the Sony Manual online. And the link - http://esupport.sony.com/US/perl/webtree.pl?template=EN&mdl=KDF55XS955&content_id=68&category_id=11&problem_id=52

The POWER/STANDBY (red) indicator flashes three times
If your power/standby indicator is flashing in a pattern of three flashes, this may indicates that the lamp cover is not attached securely. Follow the directions in the Operating Manual under changing your lamp that related to closing and securing the Lamp Cover. Ensure that the Lamp Cover Door is securely fastened by tightening each screw.

The POWER/STANDBY (red) indicator flashes continously
If your power/standby indicator is flashing continuously, and the lamp cover has been secured, your TV may be in need of service.

The POWER/STANDBY indicator is lit up green (not flashing)
A sustained green light indicates your TV is on.

The POWER/STANDBY indicator is lit up red (not flashing)
A sustained red light from your power/standby indicator simply indicates that your TV is in standby mode. This shows you that your TV is ready to be turned on with the remote.

Is it the power light and not the lamp light? If the lamp light is flashing then replace the lamp.

Apr 07, 2009 | Sony Grand WEGA KDF-55XS955 55" Rear...

1 Answer

New Sharp Aquos LC37X20E. After 30 mins turns itself off to standby and comes back on after 2-5mins (even though the automatic return to stanby has been set to "disable"). Eventually after...


According to Sharp it is a software problem. Engineer came, installed software update ,10 minute job.....TV worked fine for 1/2 day unfortunately: Then images turned black and white in all channels TV turned itself off, and stanby and OPC buttons started flashing. When TV came back on its own 10 mins later , screen had 2 large square staines superimposed in image (as if it was a burnt screen)...Engineer will be back next week...all quite sad really for a new TV.....will keep u posted

Jul 03, 2008 | Sharp Televison & Video

Not finding what you are looking for?
Sony KDL55HX800 55 in. TV Logo

Related Topics:

96 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

kakima

Level 3 Expert

102366 Answers

The Knight
The Knight

Level 3 Expert

74887 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...