Question about Sceptre X20g-Naga III 20.1" LCD Monitor

1 Answer

Got a sceptre x20 and when it warms on the screen goes black and i have to turn it off and then turn it on. it has this intermittence every 5 to ten seconds. Can I get some help?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 11,361 Answers

More likely to have power supply problem due to bad caps, that will be the first thing to check.
If you are going to DIY and have proper tools and know safety precaution then please read on:
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: http://s807.photobucket.com/home/budm/allalbums
Post back what you see inside so we can guide you further and it will help out other people in the future also.

Basic LCD monitor troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting

http://en.wikipedia.org/wiki/Capacitor_plague
Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Posted on Sep 30, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Haft of the screen is black.


Most likely, it is some capacitors in the inverter or power circuit that is dying. Check out http://www.fixya.com/support/r7406380-tv_training_manuals

Dec 16, 2012 | Sceptre 46" 1080p Lcd Hdtv X460bv-fhd

1 Answer

My sceptre won't show my pc screen, it keeps going to black screen...when I push source button my pc flashes on screen but then goes black...


I believe you are trying to display too high of resolution to this screen.
Try using a lower resolution. If you had 1024x768 then try 800 x 600.

Nov 19, 2009 | Sceptre NagaIII X30SV 30 in. HD-Ready LCD...

1 Answer

Screen goes black after powering up sound is just fine.


The backlight video board inverter it dead,need a new one.

Oct 03, 2009 | Sceptre NagaIII X30SV 30 in. HD-Ready LCD...

1 Answer

X20 IRIVER


You screen is gone ( burned ) <due to high impact falling down, too much of use heats up the screen>

don't cost much but it's a bit difficult to find.....try amazon.com

PLEASE RATE ME AS ( FIXYA ) <blue boxes>............

May 27, 2008 | iRiver X20 MP3 Player

6 Answers

Sceptre X32GV-Komodo


See troubleshooting (p.96-99) of user manual
but Unfortunately i think this problem is for Sceptre ...
For technical help, contact our Sceptre Technical Support Group via email or
phone. Please have your Sceptre p/n number, serial number, and date of
purchase available before you call.
Tech Support E-mail : monitor-ts@sceptre.com
Customer Service Email : cs@sceptre.com
TEL : 1800-788-2878
Operation Hours : Mon - Fri at 8:30 AM – 5:30 PM Pacific Standard Time

Mar 20, 2008 | Televison & Video

2 Answers

Sceptre X20


reinstall your video card drivers ,

Nov 16, 2007 | Sceptre X20g-Naga III 20.1" LCD Monitor

2 Answers

Blue screen of death on a tv??


this could be three differnt things

1. the crt itself could be bad

2.the vertical ic on the crt board

3. the focus pack or focus block

Sep 19, 2007 | Sony KP-53V45 53" Rear Projection...

2 Answers

New Sceptre 37" LCD TV does not turn on


I just got a 42" komodo by Sceptre, same problem, except "SCEPTRE" showed on the screen. I was sent a USB key program to insert in the service slot in the back and it reflashes the bios. This is old news for you but maybe new for someone?

Aug 28, 2006 | Sceptre X37sv-Naga 37 in. LCD Television

Not finding what you are looking for?
Sceptre X20g-Naga III 20.1" LCD Monitor Logo

275 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sceptre Computers & Internet Experts

Cindy Wells

Level 3 Expert

5186 Answers

Cleverer2

Level 2 Expert

298 Answers

Ricky Ostrom
Ricky Ostrom

Level 2 Expert

274 Answers

Are you a Sceptre Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...