Question about PC Desktops

1 Answer

When sending a video message the sound is only just there, my findinds are I only have 2 green bars in my auto settings

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Install your VGA driver and setting and trying it again

Posted on May 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Monitor was in safe mode turned computor off and removed and replace ram. Monitor now flashing RV370 P N 113 A62801 106 BIOS not sure what to do now. to get computor booted back up


Hi...sounds like your video card has died on you. Do you have another video card lying around to swap out with the old and try?

When the video card is sending power to the monitor, the light will be green - if the light never turns from amber to green when the computer is booting, this means that the video card is not sending a signal to the monitor, probably because its toast.

May 01, 2011 | PC Desktops

1 Answer

Sound is not


1) Check the task bar sound icon mute active or not (Tick mark view on mute box)
2) Sound icon not in task bar check device settings.
3) Go control panel > System > Hardware > Device manager
4) Sound, Video, game controllers view problems.
5) Re-install Sound card driver.

Mar 26, 2011 | PC Desktops

3 Answers

How do i hook up the speaker to my computer


if you have stereo speakers, connect it to the green audio port on your computer. if you have digital surround, you have green, yellow and black. insert the speaker connectors accordingly.

Mar 14, 2010 | Acer Aspire T310 PC Desktop

1 Answer

E-machine t6212 won't boot. I actually have two e-machines that are not sending a signal to the monitor. One is a t6212. It is booting up because I can shut it down using the windows key + up arrow +...


If you get only one BEEP at boot then the computer is working..

Do you have a 2nd monitor to test with?

if it BEEPS more then once...
pull out your mem chips and test,,
If itt works them one of the mem chips are bad if not..
pull out all pci cards and test.. if it works its a bad card...
if not unplug all HD and CD roms and test.......

If not fixed yet it maybe a onboard video problem...

But IF you put a video card in b4 the problem started then your bios may have auto set it sellf to PCI/AGP mode.

Check bios setings,, look for onbord setings for the video

Feb 21, 2010 | E-Machines T6212 PC Desktop

1 Answer

My status bar disappeared after upgrading my video card, don't know what to do to get it back.


Do you mean the Task Bar? if it is, ctrl+alt+del then go to File > New Task (Run...) then type explorer. Or click Auto on your monitor, to set the screen back to default view. Hope this helps.

Nov 18, 2009 | Dell Dimension 2400 PC Desktop

3 Answers

Green display on boot up Please help


Check to see that there are no machine BIOS settings that could affect the monitor. Normally, the bios controls display until the OS takes over. If your XP screen after bootup looks fine, I don't see how you have a problem with your monitor setup under Windows.

Jul 03, 2009 | PC Desktops

1 Answer

Main screen only has three boxes BGR


The monitor is telling you it's not getting a signal from the computer. The message is displayed to show the monitor is on and can display an image, but the computer is not sending video. Probably the computer is not starting up, or there has been a failure of the video card. You'll need to check into the cause.

Dec 09, 2008 | HP Pavilion a305w (DM181AR) PC Desktop

1 Answer

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).
If the monitor displays any of these messages when the computer should be displaying video , do the following items until an image from the computer appears:

1.
Ensure the computer is really sending a video signal. To bring the computer out of suspend mode: move the mouse, press the spacebar, and press the suspend button on the keyboard twice (the suspend button has an icon that looks like a quarter moon).
2.
Ensure the video cable is connected (and connected to the correct video port).
3.
If you are trying to view video from a set-top box, DVD player or similar device, use its menu system to set the proper video output channel so that it matches the video connection are using. For example, if the monitor is connected to a satellite receiver via a second HDMI connection on the back of the receiver, select HDMI-2 (or similar) using the remote control for the receiver.
4.
Turn off the monitor using the monitor's power button and then restart the monitor.
5.
Cycle the power on the monitor as follows:
1.
Turn off the monitor. The power light on the monitor should be off. Leave the computer turned on.
2.
Unplug the power cord.
3.
Wait 5 seconds.
4.
Plug in the power cord.
5.
Press the power button on the monitor to turn on the monitor.
One of two things happens:
1.
The image from the computer displays on the monitor and you can use the computer again. This indicates that the monitor was unable to detect that the computer had awakened from suspend mode. Turn the monitor off when it is not being used or disable suspend mode. For some computers, updating the BIOS corrects these types of suspend problems.
2.
The power light on the monitor comes on but the screen displays one of the messages again. The monitor is not receiving a video signal from the computer that it can detect and use. Continue using these steps to adjust the Windows display resolution to the Monitor's native (default) resolution.
6.
Adjust the Windows display resolution to a setting that is compatible with the monitor:
NOTE: The native resolution setting for your model of monitor can be found in the Monitor User Guide, the monitor's product packaging, and product specifications.
1.
Restart the computer and press F8 repeatedly after the first logo screen.
2.
Select Safe Mode .
3.
Windows should open showing a Windows desktop with lower resolution and fewer colors.
4.
In Windows Vista, click Start , Control Panel , and click Adjust Screen Resolution in Appearance and Personalization.
In Windows XP, click Start , Settings , Control Panel and then double-click the Display icon and select the Settings tab.
5.
Move the slider bar until the native resolution for the monitor is set, click OK and restart the computer.
6.
If the native resolution is not available from the slider bar, click Advanced Settings , click List All Modes (from the Adapter tab), select the resolution, and click OK .
If the native resolution setting is not available as a selection in Windows, you can temporarily use 1024 x 768 to complete these steps. However, you should update the graphics driver on the computer. Updating the graphics driver can provide more display resolutions to Windows; possibly including the native display resolution for the monitor.
*
Check for nVidia video driver updates at nVidia Home Page (in English).
*
Check for ATI video driver updates at ATI Home Page (in English).
*
Check for S3 video driver updates at S3 Graphics Home Page (in English).
*
Check for Intel video support and downloads, Intel Downloads (in English).
*
If you own an HP or Compaq computer, HP hosts video drivers and some video driver updates at the HP Software and Drivers site (in English)
7.
Connect the monitor to another computer that you know is working to determine if the monitor should be serviced or replaced:
*
If the monitor displays an image from another computer, you know that the monitor works. Troubleshoot the video connection and graphics adapter on the computer.
*
If the monitor remain blank when connected to another computer, the monitor signal processing hardware may be bad. The monitor should be repaired or replaced.

NOTE: One or more of the links above will take you outside the Hewlett-Packard Web site. HP does not control and is not responsible for information outside of the HP Web site.

Jun 15, 2008 | HP PAVILION A6230N DESKTOP PC

1 Answer

Display property settings


Hello Phil 65
Happy Holidays
well, the best bet for you, is uninstall the Driver for your video card, from device manager , and ADD/Remove programs, your other features for the particular video card. ONLY.
then go ahead and restart your PC, reinstall drivers according, and have your CD for video drivers and settings program.
that should restore your video , ....or use the Windows Restore point feature to a date all work fine.
good luck

Dec 05, 2007 | Sony VAIO PCV-J120 PC Desktop

3 Answers

Black screen when i turn my cpu on hp pavilion a520n


Are you working on battery without connecting the laptop to the mains power ? Please put the laptop on adapter power and recheck. Rajesh

Jul 10, 2007 | HP Pavilion A520n (DW233A#ABA) PC Desktop

Not finding what you are looking for?
PC Desktops Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top PC Desktops Experts

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18299 Answers

Are you a PC Desktop Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...