Question about Lexmark E232 Laser Printer

1 Answer

How can I reset the tonner chip? - Lexmark E232 Laser Printer

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 78 Answers

On this model, you cannot. It will lock you out when the chip reports you have reached the maximum pages, or when the printer toner sensing laser reaches the contact on the other side because the toner level in the cartridge is too low to block it. You can replace the chip if you can find one online, or I have access to the chips if you need one. The other issue is that if it has locked you out, it means that the toner is close to low and may only print 10 more or 100 more pages by just replacing the chip, so this may not be a cost-effective solution for you.

Posted on Sep 29, 2010

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 525 Answers

SOURCE: my samsung printer model is

This is a link to view how to reset: http://www.youtube.com/watch?v=Qzc9JImUcak
This is a link to download firmwares (version 1.13, 1.16, and 1.18_fix) and download software to update firmware files to printer: http://dox.abv.bg/files/listtree

MOST IMPORTANT:
1. Push 8 times button MENU then OK to print a report and view your version of firmware
2. REPLACE FIRMWARE VERSION 1.13 ONLY WITH 1.13_fix
3. REPLACE FIRMWARE VERSION 1.16 ONLY WITH 1.16_fix
4. REPLACE FIRMWARE VERSION 1.18 ONLY WITH 1.18_fix
5. REPLACE FIRMWARE VERSION 1.21 ONLY WITH 1.18_fix
6. DO NOT REPLACE FIRMWARE VERSION 1.23, I DON'T HAVE FIRMWARE VERSION 1.23

IF YOU REPLACE FIRMWARE VERSION WITH WRONG VERSION A "SCANNER ERROR" OCCURS AFTER SEVERAL MONTHS WHICH MEANS YOUR SCANNER MATRIX IS BURNED OUT AND MUST BE REPLACED

GOOD LUCK!

Posted on Jan 24, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to reset samsung scx4601 tonner


Dear
replace with a new cart./ If you gone for refilling replace the crum module (toner chip). with a new one.
Thanks.

Sep 09, 2014 | Samsung Office Equipment & Supplies

1 Answer

Tonner low message coming still when the tonner is full


If the toner cartidge had been refilled, then either a chip had not been replaced correctly or a "low toner bar" inside wasn't cleaned properly while the cartridge was being rebuilt. If the cartridge was OEM new, it probably had a faulty or missing chip.

Nov 28, 2013 | Cannon Office Equipment & Supplies

3 Answers

My Sharp Copier Model AR-M160 showing f2 error even I replace the new tonner.


Below are the F2 errors and causes for Sharp AR-M160

"F2-31" Image density sensor fault
"F2-32" Drum mark sensor fault
"F2-33" Grid voltage correction problem
"F2-35" Grid voltage correction problem
"F2-37" Drum mark sensor fault

Cause : CRUM chip defect OR Improper developing unit
Check and remedy : As you have already replaced the tonner, we can suggest Replace the CRUM chip,Replace the developing unit

Regards,
Shrey

Jun 01, 2011 | Sharp AR-M160 Laser Printer

2 Answers

I have samsung laser printer SCX4300, my printer shows tonner exhausted replace tonner. Please send me software for reset tonner.my emailid is


Hi! if you refilled your toner then it is best to buy a chip for it. The price is not so hi, maybe around $5. When I refill the toner I put a new chip and I save nerves cells :-)
I tried out a lot of software but all of them was full with viruses...

Dec 29, 2010 | Samsung LASER Printer

1 Answer

Ricoh aficio sp-1100 sf toner chip reset problem


WE HAVE RICOH PRINTER SP 1100SF & REPLACED CARTRIDGE WITH NEW RECYCLED BLACK TONNER CARTRIDGE FROM POWER POINT, BUT UNABLE TO PRINT AS CHIP GIVEN IS NOT ACCEPTED BY PRINTER. TRIED 3 DIFFERENT CHIPS STILL PROBLEM PERSISTS. WHAT MAY BE THE RESEASON AND SOLUTION

Nov 30, 2010 | Ricoh Aficio SP-C210SF Printer

1 Answer

How to fix error replace/print cartrage in xerox 440ps If this error is cartrage chip or tonners, i have not availble chip while tonner is available. if problam is chip, what is tricks & tips


You will be wasting money buying just a chip. The toner and all is in the cartridge. Normally when the replace message comes on, the cartridge is shot.

Nov 23, 2010 | Xerox DC440ST Copier

1 Answer

How to reset my tonner chip without any instrument


Hi,

Have you done refilling recently ? If so besides refilling the cartridge with toner there is a chip in it that you should change so the printer will know that a new cartridge is installed.

Regards,
FixYa

Nov 16, 2010 | Lexmark E120n Laser Printer

2 Answers

I re-filled a ML-1640 toner. Still says toner exhausted. Please help.


there is one patch software for resetting the counter. once you patch it will not ask any thing regrding the tonner forever

Oct 29, 2010 | Samsung ML-1640 Monochrome Laser Printer

1 Answer

Samsung clx 3175 toner chip overide/reset?


we use chip and fuse for samsung cartage reset when it give us cartage empty message. before geetting thish we gets tonner is low .if recently we filled samsung dust/powder/tonner in cartage we no need reseter. in my practics while i need to put fuse (reseter) i put iton cartage after resetin suddenly i putout it from cartage and use old fuse. in this way we can use or not green chips? actuly it is difficult.

Jun 11, 2009 | Samsung CLX-3175FN Color Laser All-in-One...

Not finding what you are looking for?
Lexmark E232 Laser Printer Logo

443 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lexmark Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2017 Answers

Are you a Lexmark Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...