Question about Fisher and Paykel Dryers

1 Answer

Fisher & paykel front load dryer gone crazy!!!

Can you believe it started by itself - some time through the night only to be found screaming in the morning - running with all the lights on. HELP!! ..on turning off and on the problem remains. even with the door open!!
Angel

Posted by on

  • Angela Tasker May 25, 2008

    Thanks - is is something i could buy and replace myself?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 3,587 Answers

Sounds like a poltergeist..call in Ghostbusters..just kidding, really

that means your control board is really unhappy, and will need to be replaced..

Posted on May 25, 2008

  • Patrick Michaels
    Patrick Michaels May 25, 2008

    sure..most likely.it's not that tough..big issue is to mark all the wires, before you take it apart, since you'll need to make sure they go back where they belong.

    thankya for using fixya


×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you get the front panel off a fisher paykel dryer to replace the felt seal


my F&P front load dryer would not start - it would hum when I pushed the start button. After trial and error taking the top off, then the front panel with the door I found the lint exhaust was completely blocked. After doing a thorough cleaning of the dryer and putting it back together it worked! (note: DE60 Elba dryer)

Jul 14, 2014 | Fisher and Paykel DE09 Dryer

2 Answers

Auto dry not cutting off when clothes are dry


Go to http://fisherpaykelparts.net/techhelp/fisher-paykel-top-load-dryers-us-models/ This forum will work you through your problem. Your problem should either be dirty or bad connections with the contact continuity plates, the chrome things under the lint bucket or the control circuit.

Oct 05, 2010 | Fisher and Paykel DEGX1 Electric Dryer

1 Answer

My dryer is a top loading Fisher and Paykel and it has started squeaking.


It could be bearing or guide in the drum.Go to http://fisherpaykelparts.net/techhelp/fisher-paykel-top-load-dryers-us-models/ This forum will work you through your problem

Sep 21, 2010 | Fisher and Paykel DEGX1 Electric Dryer

1 Answer

Dryer drum does not close when starting the dryer


Go to http://fisherpaykelparts.net/techhelp/fisher-paykel-top-load-dryers-us-models/ This forum will work you through your problem

Aug 27, 2010 | Fisher and Paykel DEGX1 Electric Dryer

1 Answer

I just got home from vacation and we went to use the Dryer but when you push the power button and the lights come on then you push start ... the unit does not start ... and the lights shift to as if the...


Try unplugging the unit for an hour and replugging it back in. If that doesn't work go to http://fisherpaykelparts.net/techhelp/fisher-paykel-top-load-dryers-us-models/ This forum may help you through your problem. Passed that while you were gone you could of had a power surge that burned the electronic out. If that's the case time your can replace some of the electronics.

Aug 04, 2010 | Fisher and Paykel DEGX1 Electric Dryer

1 Answer

Fisher & Paykel Auto Sensor Dryer stops & beeps constantly


Hi emkboyce

my Fisher Paykel auto sensor dryer keeps stopping and beeping, i have to stop it and and re start.

I had the same problem. I took it off the wall and vacuumed up all the lint from everywhere including around the back and including taking off the back and vacuuming everything I could reach inside. I then used a damp cloth to get rid of the rest of the lint/dust.

I thought I was wasting my time but guess what, the problem has gone.

Good luck!

Sep 30, 2009 | Fisher and Paykel DEGX1 Electric Dryer

1 Answer

How do you remove the front of a fisher and paykel front loading dryer  # DE09-US1 - i want to really clean the lint area  I watched the service guy do it once and it was soooo simple -   but once we...


Welcome...
You need to look up near the top of the cabinet front, there are screws way up near the top on each side that secure the front panel to the cabinet. Take them out and tip the front forward and then pull up. be careful of the door switch wires.
if you need a comprehensive service manual for that dryer, it can be found here:
http://www.fisherpaykelparts.net/ecart/category.php?category_id=53

Jan 21, 2009 | Fisher and Paykel DE09 Dryer

1 Answer

Fisher and Paykel (NZ) tumbler dryer


Try switching off the power to the machine for 5-15 mins and then re-switch power on
Had same symptoms with my multi-temp F&P front load dryer.
Andy

Nov 30, 2007 | Fisher and Paykel DEGX1 Electric Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher and Paykel Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

Tim Whalen

Level 3 Expert

3069 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Fisher and Paykel Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...