Question about Kodak EASYSHARE V1253 Digital Camera

1 Answer

Hi,my camera wont come on the blue light on top comes on for 3secnds then shuts off I never had any problems with the camera and today is my babies birthday is it anything I can fix

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 3,006 Answers

Your camera may have a lens error. This is such a common fault that I hope you don't mind me pasting my stock generic answer below. No point in reinventing the wheel!

Stuck lenses are probably the most common reason that compact digital cameras get thrown away, but there's a fair chance of recovering use of your camera again

The fault is commonly caused by dirt or grit blocking the mechanism, or due to it having suffered a recent fall. Another common cause is that the camera was in a pocket or bag and the power button accidentally activated and tried to open the lens against resistance. The mechanism may have simply become dislodged or there may be parts which have broken.

If your camera is still under warranty and has definitely not been subject to misuse then contact the Kodak service department in your country to find out about a free repair. If the warranty has expired though a professional repair will far exceed the cost of replacing your camera. You will therefore have nothing to lose by trying to fix this yourself.

Please click here and you will be taken to an excellent article provided by the Camera Repair website. For the most part, you'll be guided on how to physically manipulate your camera to try and clear the fault.

If the link doesn't work then cut and paste the following address into your browser:-

http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Good luck, I hope you manage to use this information to fix your camera. Please take a moment to rate the free answer I have provided for you.

p.s. Hope you have a lovely day with your baby! :-)

Posted on Sep 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

MBP35: There is power to both


Hi

For better assistance you can contact our Baby Monitors specialist.
http://www.motorolacordless.us/

Best Regards,
Katy
Motorola Support

Jul 17, 2011 | Motorola Mobility Mbp35 Digital Video...

1 Answer

My swann pencam which is brand new, bought today, wont turn on


I have this pen and it will not turn on. I have charged it. The orange light stays on all the time. The blue light will not come on. IT does not work. I would never buy anything made by swann again. Sharon.

Dec 17, 2010 | Swann Communications SW234PCG PenCam DVR...

1 Answer

Hi, I love my Avent SCD510 monitor, but it started acting up today. In the past, when the parent monitor was on, I could hear every move my daughter made. I could also tell that it was on by the white...


Hi there, I had the same problem. My baby monitor used to work fine, and then all of a sudden it wasn't picking up my baby's cries. I used to be able to hear the static in the background, but I couldn't even hear that anymore.If I pressed the "sensitivity" button on the side of the parent unit, I could hear the static and my baby, but after a minute it would shut off. Very frustrating!
It turns out that somehow the sensitivity had been set to low. (Maybe this had something to do with the time I let my baby play with it...) I turned the sensitivity back up to high and it worked fine.
To set the sensitivity, press and hold the sensitivity button (located on the side of the unit) for about one second. There will be a number of blue lights that light up on the front -- the more lights that light up the higher the sensitivity is. (Mine was set at 2 out of 5, not very sensitive.) While the lights are on, press the + button (located on the face of the unit) to increase the sensitivity (or press the - button to decrease it, but that is probably not what you want to do if you are reading this post.) Press + until all 5 blue lights are on, and you'll be at max sensitivity. (You can adjust it later if this is too sensitive, once you find out of this fixes your problem.)
After a minute, your baby monitor will set itself to the sensitivity level that you set. So if the sensitivity level is really low, the monitor will seem to turn "off" after a minute. If it is high, you should still hear some static.
Hope this answer helps someone! I am really glad I don't have to take this unit back, I like it.

Nov 02, 2010 | Philips Avent® Scd510 Dect Baby Monitor

3 Answers

Hi... I have a Kodak EasyShare CD82 Digital


Sherry, have you tried to replace the battery of your camera? The recommended battery for your camera are the Ni-MH battery and the Alkaline battery. Now if you already using this type of battery and still your LCD screen is black its time for you to call Kodak at 1 800 235 6325 ext 12, it means that the LCD screen of the camera is already defective.

Feb 08, 2010 | Kodak Cameras

1 Answer

My fuji finepix s5600 shuts down when i want to take pics,


Try cleaning the battery contacts in the camera first with a pencil eraser and then with a cotton swab lightly dampened with rubbing alcohol.

Jan 07, 2010 | Cameras

1 Answer

Kodak Easyshare camera model MD1063 wont turn on


hi,your camera needs a servise , its a lance problem just open your camera and remove the lance assembly and servise it properly , otherewise contact authorised person,

Aug 29, 2009 | Digital Blue EasyShare MD1063 Digital...

1 Answer

My a/c unit will not come on.


hi lisa, this looks like an electrical problem, if out of the blues the ac unit stopped working. check the following
ac fuse inside your car ac fuse outside under the hood check fuse for fan as well
hope i helped thanks

Aug 13, 2009 | 1997 BMW 328

1 Answer

Low Light.


is the flash disabled?

Mar 02, 2008 | Samsung Digimax A400 Digital Camera

1 Answer

Nikon L3 Lens wont extend


Hi:
If the camera has not been abused, such as dropping, impact of some sort, or restricting the extending lens, then there is an internal problem.
See my other posts on suggestions of selling it.

Nov 27, 2007 | Nikon COOLPIX L3 Digital Camera

2 Answers

Tv shut off and wont come back on


Your TV is going into some kind of a protection shutdown. In todays tvs just about anything wrong anywhere and the tv will do what it is doing. Unfortunatley there is probably little you can do yourself to track it down, probably need a pro.

May 09, 2007 | JVC AV-48WP30 48" Rear Projection...

Not finding what you are looking for?
Kodak EASYSHARE V1253 Digital Camera Logo

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Cameras Experts

kakima

Level 3 Expert

102366 Answers

Tony

Level 3 Expert

2600 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Are you a Kodak Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...