Question about Remington 16" Electric Chain Saw

Open Question

Model 1072624-01 ---16" BAR-107704-02/CHAIN-091375-28 The plastic inside de cover holding the tension screw is broken. Where can I get a replacement cover? Thanks

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 413 Answers

SOURCE: the chain adjuster screw is broken

If the housing itself is broken you will probably be better off buying a new or used say. As that part would be very expensive and you will still have a used saw.

Posted on Apr 07, 2009

  • 188 Answers

SOURCE: Current flows through alright. Engine makes

You may have worn down the spocket gear... You should contact Master Parts at 800-446-1446. I hope this helps!

Posted on Aug 24, 2009

dontbother10
  • 2220 Answers

SOURCE: I need to replace the orange plastic cover that

We like you can do no more than an Internet search. If your search nets zero hits odds are ours will too.
RemingtonPower has stopped production. Replacement parts are almost completely exhausted.

A search at RemingtonPower returns part number 108641-02, NLA
An Internet search for that part number (Remington 108641-02) finds NLA at all except M&D Mower here:
http://www.m-and-d.com/order.html?id=LxVP4Uzd
Item: CEN-108640-01; CLUTCH COVER; $22.87
Eventually the only source for replacement parts will be eBay. Consider replacement with a product from a company you expect to remain in business for 10-15 years. HTH

Lou
21st CENTURY HEATER/GRILL became Remington, then RemingtonPower. The parts supplier has had at least 3 different names. If M&D is fruitless there is nothing more we can do to help you and the sole source is eBay.

I went to great lengths to find an answer to your question and my rating should be “walks on water” with a tome about what a wonderful person I am. Punishing me for Remington’s short fall isn’t fair to me. Sorry
Lou

Posted on Nov 08, 2009

dontbother10
  • 2220 Answers

SOURCE: Need a new tensioning screw for a model 111174-01 Rem. chainsaw

Your model number is a dead end. use 107625 (it includes yours). I think this is what you need.
Remington.com
http://shoppingcart.msservicecompany.com/Default.aspx

  • Type "YourModelNumber" into the "Search for your unit by Model:" window, then click search.
  • Click the "YourModelNumber" - Remington Electric Chain Saw "View Model" link.
  • Click "View Owners Manual" or "View Illustrated Parts Diagram" link.
    • Type "YourPartNumber" into the "Search for your parts by Part #:" window, then click search.
A tension repair kit is available here:
MasterParts.com
http://www.masterparts.net/Merchant2/merchant.mvc?Screen=PROD&Store_Code=MPD&Product_Code=108640-MD
Part number 108640-MD; DESA SPECIALTY PARTS: KIT, ADJUSTMENT SCREW FOR SPROCKET COVER (REM-18); $5.95.
Kit fits the following covers: 108640-01, 116675-01 and 108641-02 (note: for the 108641-02 the screw will adjust from the front with a screw driver, not with a thumb screw at the back) KIT INCLUDES: screw, clip & adjustment block.

If you have more questions or need additional help please reply below and I will get back to you. Good Luck. HTH
Lou
Thank You for using FixYa.

Posted on Apr 19, 2010

dontbother10
  • 2220 Answers

SOURCE: Loose chain

Hello David; good luck to you.
I went here and input model 107624-01, followed the directions and when possible selected the IPL. I found pn 108640-01, item 32, NLA @ Remington Power:
Remington.com
http://shoppingcart.msservicecompany.com/Default.aspx
Type "YourModelNumber" into the "Search for your unit by Model:" window, then click search.
Click the “YourModelNumber” - Remington Electric Chain Saw "View Model" link.
Click “View Owners Manual” or "View Illustrated Parts Diagram" link.
Type "YourPartNumber" into the “Search for your parts by Part #:” window, then click search.

Part Number 108640-01 is available here $13.99 - the picture is a complete assembly (cover, bar nuts, spacers and tensioner assembly).
PartsFor.com
http://www.partsfor.com/
If me I would use the phone number provided, ensure it includes all illustrated parts, order with a credit card (recover your investment much easier), get the name of the service person helping me and the name of her/his supervisor.
Please re-accomplish my steps to ensure I made no mistake, I do err occasionally (I swear on a stack of UCMJs covers have been NLA for quite a while).

If you have more questions or need additional help please reply below and I will get back to you. HTH & Good Luck.
Lou
Thank You for using FixYa.

Posted on Jul 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do i tighten the chain please


Under the protective cover of the bar and chain on the motor are the nuts / bolts and chain tension adjustment screws.

Depending on model (you didn't include yours so generic instructions follow); removing the nuts / bolts that hold the cover in place will allow the bar and chain to be removed - or to adjust the chain tension on the bar with a long screw for that purpose. Once the tension is set with the adjustment screw it is locked into place when the cover is re-secured with the nuts / bolts.

If you need more specific help - please provide your make and model chainsaw.

Nov 03, 2015 | Garden

3 Answers

The chain keeps coming lose and falls off


Make sure chain tension on the bar is correct and then the 2 nuts holding the bar is correct, Youtube has alot of videos on how to set chain tension as well as the Oregon website

Aug 27, 2014 | Craftsman sears 18" Chain Saw Chain (...

1 Answer

My chain came off and i can't get the bar back to put the chain back on, help


Hello mingster. Just inside of bar is a screw for adjusting the tension of the chain. The screw hole maybe full of dust & oil. Rotate the screw while holding the chain next to the tip of the bar to determine clockwise or counterclockwise. When adjusting the chain tension don't over tighten.

Sep 01, 2013 | Husqvarna "Chain Saw - 16" Bar, 3 Hp

1 Answer

Chain fell off and I can't get it back on.


Turn the saw off. Look for several nuts on the right side of the saw that hold the cover on and the blade to the saw. Loosen these nuts, and before taking the cover off, loosen the chain adjuster by turning it (usually a screw head on the same side, or on the front of the saw as you look down the blade towards the saw.) Loosening the chain adjuster moves a pin that goes into the bar (the part the chain rides around when operating) to push it away from the saw to tighten the chain when you are tightening it. Take the cover off, and put the chain around the sprocket at the back like a bicycle chain, and then while holding the bar (sometimes a partner helps) parallel to the saw and outward away from the front of the saw, align the bottom parts of the chain inside the bar guide slot all around the bar, holding just enough tension that it doesn't fall off the sprocket or get misaligned in the bar guide. Try moving the chain a little bit to make sure it is not binding on anything. If it doesn't move at all, make sure the chain brake is not on. Once it is moving smoothly, put the cover back on, and begin to hand tighten the nuts. Just before they begin to get tight, eyeball where the chain tensioner pin is in relation to the hole it is supposed to go in. Adjust the chain tensioner screw to move the pin towards the hole. When it pops in the hole, continue tightening the nuts by hand until tight. Now you and your partner can let go of the bar. Adjust the chain tensioner for the proper tension in the chain, not too loose, not to tight, refere to your manual. Finish tightening the cover nuts using the universal wrench to the specifications given in the owners manual.

Sep 06, 2011 | Poulan 14" Electric Chainsaw

1 Answer

I have an HomeliteUT10516 chainsaw. It has a broken chain, I have purchased a replacement. Someone has also lost the owner manual for me. Is there a way to download a replacement manual or an online source...


Remove bar cover, turn tension screw counterclockwise, place end of chain over sprocket and place chain in bar groove, turn tension screw clockwise to tighten chain, replace cover,fasten. be sure to have point of chain faceing forward.

Aug 29, 2011 | Garden

1 Answer

How to remove chain from blade no bolts unde cap


If you have removed the bolts that hold the cover, and the chain is still tight on the bar, locate the chain tension screw and turn it to release tension on the chain. The screw drives the pin that fits into the hole on the bar. When you replace the chain, line up the pin and the hole, and ensure the chain is seated in the bar. Tighten the screw until the bar does not move and the chain does not fall off. Adjust to the normal tension for your saw and replace the cover.

Jul 25, 2011 | Poulan 18" Wild Thing Chainsaw

1 Answer

Can i get instructions to download on how to change the chain on my homelite 33cc chainsaw with 14.35 chains


Got to homelite.com and input your model number.
WARNING:
When servicing, use only identical Homelite
replacement parts. Use of any other parts may
create a hazard or cause product damage.
WARNING:
Always wear safety goggles or safety glasses
with side shields during power tool operation or
when blowing dust. If operation is dusty, also
wear a dust mask.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to damage from
various types of commercial solvents and may be
damaged by their use. Use clean cloths to remove
dirt, dust, lubricant, grease, etc.
WARNING:
Do not at any time let brake fluids, gasoline,
petroleum-based products, penetrating
oils, etc., come in contact with
plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious
personal injury.
LUBRICATION
All of the bearings in this product are lubricated with
a sufficient amount of high grade lubricant for the
life of the unit under normal operating conditions.
Therefore, no further lubrication is required.
REPLACING THE guide BAR AND
CHAIN
See Figures 34 - 43.
DANGER:
Never start the engine before installing the
guide bar, chain, clutch cover, and clutch drum.
Without all these parts in place, the clutch can
fly off or explode, exposing the user to possible
serious injury.
maintenance
Fig. 34
Fig. 35
Fig. 36
WARNING:
To avoid serious personal injury, read and
understand all the safety instructions in this
section.
n Always place the switch in the stop “ ” position
before you work on the saw.
clutch
cover
Run
Position
sprocket
Page 26 — English
cutters
bar
groove
chain drive links
Fig. 38
maintenance
chain rotation
chain drive links
Fig. 37
n Make sure the chain brake is not set by pulling
the chain brake lever/hand guard towards the
front handle to the run position.
NOTE: When replacing the guide bar and chain,
always use the specified bar and chain listed in
the Bar and Chain Combinations section later
in this manual.
n Wear gloves when handling the chain and bar.
These components are sharp and may contain
burrs.
n Press in on the clutch cover lock knob and rotate
counterclockwise until the clutch cover can be
removed.
n Remove the bar and chain from the mounting
surface.
n Remove the old chain from the bar.
n Lay out the new saw chain in a loop and
straighten any kinks. The cutters should face
in the direction of chain rotation. If they face
backwards, turn the loop over.
n Place the chain drive links into the bar groove
as shown.
n Position the chain so there is a loop at the back
of the bar.
n Hold the chain in position on the bar and place
the loop around the sprocket.
n Fit the bar flush against the mounting surface
so that the bar studs are in the long slot of the
bar.
n Replace the clutch cover ensuring that the
adjusting pin in the clutch cover is in the bar
chain tensioning pin hole and that both bar
studs are securely in their respective holes in
the clutch cover.
NOTE: The adjusting pin may need to be slightly
repositioned with the chain tensioning dial so
that it is aligned with the position of the bar chain
tensioning pin hole.
n Replace the clutch cover and rotate clutch
cover lock knob just enough to hold the cover
in position.
NOTE: The bar must be free to move for chain
tension adjustment.
n Lift the tip of the guide bar up to check for sag.
n Remove all slack from the chain by rotating the
chain tensioning dial clockwise until the chain
seats snugly against the bar with the drive links
in the bar groove.
n Release the tip of the guide bar and, if the chain
sags, turn the chain tensioning dial clockwise.
Repeat this process until sag does not exist.
n Hold the tip of the guide bar up and tighten the
clutch cover lock knob securely.

Jun 25, 2010 | Homelite Consumer Products 9.0 Amp, 14 In....

1 Answer

Tighten chain?


Depending on the model, you adjust the chain tension using the screw that is located either between or below the two nuts that hold the sprocket/bar/chain cover. Loosen the nuts and turn the screw clockwise to tighten, counter-clockwise to loosen. Once you have the tension set, lift up on the bar from underneath and tighten the two nuts. Proper tension should show about half of the chain drive, and should only be done when cold. After 4 to 5 minutes of run time, stop the saw and check the tension again. A little heat in the bar/chain will cause it to loosen up. It will need re-adjusting.

May 15, 2010 | Husqvarna "Chain Saw - 16" Bar, 3 Hp

2 Answers

How do I tighten chain on Model Poulan 2050. Can't seem to get tight enough.


Hold the nose up!
c581361.gif Chain Adjustment
  1. Make sure the chain brake is off (gloves will protest your fingers).
  2. If necessary, loosen the bar nuts that are clamping the clutch cover in place (or whatever holds the clutch cover and bar on). They don't need these really loose - finger tight will do.
  3. Ease the tension adjustment until the chain is obviously loose.
  4. Using one hand, hold the nose of the bar up.
  5. While holding the nose up, adjust the tensioner so that the center of the chain just touches the underside of the bar, add a touch more.
  6. Continue holding the nose of the bar up & tighten up the bar nuts / bolts / quick-release system. HTH
Lou

Nov 18, 2009 | Poulan Garden

1 Answer

POULAN CHAIN SAW MODEL 1420 ''Chain came off track


Chain is probably stretched. SAFETY FIRST. Electric saw, make sure power is unplugged. Gas saw, make sure sparkplug wire is removed. Remove the cover where the bar is attached to the saw. U should see an adjustment screw for chain tension and one or more bar lockdown screws. Loosen the lockdown screws and turn the tension adjustment screw to permit the bar to slide back toward the motor. Put the chain back in the bar track all the way around. Adjust the tension screw to tighten chain enough you can't pull it out of the track at any spot. Slide the chain by hand at least one complete revolution feeling for any rough spots. If it moves freely, turn the tension screw enough to tighten the chain properly. Correct tension should allow you to pull the chain appx. 1/16 to 1/8 inch from the bar. Tighten the lockdown screws, replace the cover. Rotate chain by hand a couple of revolutions again to check for smoothness again before starting the saw.

Jun 26, 2009 | Poulan 952801953 Electric Chain Saw

Not finding what you are looking for?
Remington 16" Electric Chain Saw Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Remington Garden Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Phil Walker
Phil Walker

Level 3 Expert

605 Answers

Roland W VanLue
Roland W VanLue

Level 3 Expert

486 Answers

Are you a Remington Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...