C an i open lock uniden scaner?any idia?i want to recive all frequineces

hello

You may download a copy of the manual at http://www.repeater-builder.com/uniden/pdf/uniden-bearcat-bc210xl-owners-man.pdf. Programming instructions are on page 7.

There is no magic that will "unlock" a modern scanner, so you're stuck with the frequency ranges listed in the owners manual. For wider coverage you will need to purchase a scanner that comes that way from the factory.

Bill B
Listening in since the 60's

fax is not recived

Try here and look to the top right of page.

http://www.uniden.com/products/productdetail.cfm?product=BCT8

Good Luck and Please rate FixYa!

According to the manual, it's on the bottom of the scanner. It's a slide switch that should be moved toward the picture of the open padlock.

http://www.uniden.com/pdf/BC60XLTom.pdf

Lil p, hi, I'll see if I can solve your problem. If you are looking for freq's for around your area, go here and click on your country-state-county and it'll give you a complete rundown.
http://www.radioreference.com/apps/db/

If you do need a 10 code list for your area, go here,and click on your state.
http://www.nat-com.org/radio.htm

I hope this helps you out with what you were looking for, let us know.. Mechanic

here is link to the instructions
http://www.uniden.com/products/productdetail.cfm?product=TRU8885-2

first, test the actual socket using a good normal phone.
if no dial tone, get phone company to test the line.
if line ok, fully charge handset for 10 hours, if still faulty, follow the procedure to de-register and re-register your handset with the base unit.

Here is a link to the owners manual for this scanner:

http://www.uniden.com/pdf/BC350Aom.pdf

page 14 begins the procedure for programing the frequencies.

Dean
Rollin CBs