When i plug my camera into my usb cable, the program will not start.
When i plug my digital camera into my usb cable, the program to upload the pictures will not automatically start. this is a sudden problem that has never occurred before, and i have no idea how to fix it.
Re: when i plug my camera into my usb cable, the program...
Try plugging it in your comp, go to my computer right click your camera go to properties ,and click on the autoplay tab from there you should be able to choose what program starts when you plug it in. if that don't work the only thing that comes to my mind is reinstall it.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
ALTERNATE WAY TO TRANSFER PHOTOS TO COMPUTER If your photos are stored on the memory card, then removethe memory card from the camera and insert it into an USB memory card reader.Connect this USB memory card reader and memory card into the USB port of yourworking computer. Your computer will see this as an USB Mass Storage Device oran external storage device; you can then open the folder on the memory card andcopy the photos to your computer.Memory card reader is a handy device and is inexpensive. Youcan copy photos from other cameras and you can also download photos off yourmemory card to someone else's computer without the need of installing anyprograms.
You need to turn on the camera while plugged into the USB port. Then pull up the Windows Control Panel. Next go to Scanners and Camera Icon. You should find an icon there with the camera listed. Do a right click and check on Actions. You will then select "run this program on connection" and then select the Finepix Viewer. Turn off the camera and then turn it on and the system will now connect you to Finepix when the camera is connected.
If your using a memory card card go out and buy a memory card reader. These plug into your computer and will download pictures onto your computer much faster than a USB cable attached to your camera. If all the pictures on your camera appear okay with a card reader you problem is solved.
Make sure the camera is turned on, plug the USB cable into your PC first, then into the camera, wait for a beep from your PC to show it has recognized the hookup, then go to "My Computer" and look for the Fuji icon. Don't unplug the camera anytime the lights are flashing on it.
instead of using the usb plug that the camera has go to best buy, show them your card, and ask for a card reader what this will do is plug into a usb port, and it will read the data off of the card, completely bypassing the program
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use iPhoto or any other photo cataloging program.
okay ive had my a345 since christams and all has been good until recently when i tryed to upload my pictures. the camera when plugged in will say "checking usb" then it will say "communication error" something will come up and say "choose program to upload photos" and there isnt a program is it because i set my computer back and dont have the cd? i download picasa but it still wont upload.help please.
please chek the button on camera stand taht must be on and second camera must be in USb stream mode. all you nee dto change the setting no technical problem.
also you nee dto chek for USB driver whether it is installed . if it is installed when you connect cable the computer give new device found message. r u getting that?
let em knwo
try resetting preferences on the laptop (take a hard copy of any settings first), close it down, turn it over and remove the battery, then press the start button for 10 seconds, refit battery and re boot, all your settings will be reset and now try