Question about Zoom Cameras

1 Answer

J 250 series digi camera having zoom error how to rectify manually

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 6,831 Answers

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope the advise is useful. please do not hesitate to let me know if you need any further assistance.

Regards
Andrea

Posted on Sep 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I rectify the "zoom error" message on screen - also the lens will not retract either


Hello

Unfortunately a "zoom error" message is not something that you will be able to fix. This error indicates a system failure (apparently your lens is damaged, since it will not retract) and requires the camera to be sent in for servicing and repair.

You may find it more cost effective to purchase a new camera as opposed to the repair price on your current camera.

Oct 12, 2010 | Fuji FinePix J10 Digital Camera

1 Answer

Auto zooming on power up, intermittent problem


Possibly a intermittent connection in the control buttons or the ZIF (Zero Insertion Force) connector from the controls to the main PCB.
Take it in for servicing, they will do a trial by substitution (swap out control) and lubricate the connector.
There isn't really anything you can do to fix with this sort of problem.

Cheers.

Sep 28, 2009 | Panasonic Lumix DMC-FZ28 Digital Camera

1 Answer

Losing date and time when removing batterey on Kadak Z812IS


Take the camera to a repair shop and tell the tech man to replace the "super capacitor."
Problem will be fixed

Jun 15, 2009 | Olympus Camedia C-750 Ultra Zoom Digital...

1 Answer

I've lost my instructions for my olympus camedia digi camera C-370 zoom and I only had it a short time so don't know why my camera shuts off very shortly after switched on and I have to wait before I can...


I'm not sure what the cause of the problem might be but I can help you get a new manual.

Go to http://www.fixya.com/support/p220497-olympus_camedia_c_350_d_560_digital/manual-2351 and download the manual free

May 01, 2009 | Olympus Camedia D-370 Digital Camera

1 Answer

Cannot erase ZOOM ERROR from my fuji finepix Z2


With the internally zooming lens on the Z2, there's no external access to any zoom mechanisms. A "zoom error" is not eraseable until the problem has been rectified. My guess is that the camera has taken some sort of impact, which often dislodges the track in which the lens travels. Not much you can do, yourself, other than a few well-placed "taps" to realign things. Next step is to have it serviced by Fuji, but given the age of the camera, it's likely not cost effective, sorry to say.

Feb 25, 2009 | Fuji Finepix Z20fd Digital Camera

1 Answer

Zoom Lens


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension.

Here's some things that you can do to try to correct it. They only seem to work for less than 50% of the lens errors, but they're still worth a try:

http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

Jan 11, 2008 | Fuji FinePix A303 Digital Camera

1 Answer

Digi camare


The lens on your camera has become stuck due to being dropped, contamination such as sand, or a malfunction within the lens. If gently manipulating the lens itself does not free it then you will need to get it professionally repaired or replace the camera. David Millier Advance Camera Repair

Feb 07, 2007 | Fuji FinePix F401 Digital Camera

1 Answer

If you zoom to less than 12x


The macro setting on the fz series allows you to get within a couple of centimeters of the subject and obtain focus. That is pretty close. That is too close. The camera will throw a shadow. You need some room. Most high zoom cameras (notably Olympus) have macro capabilty throughout the zoom which not only increases the magnification but also allows you (requires you) to put some distance between the lens and the subject. The panasonic fz series is different. They do not have macroability at zooms greater than 2x-3x. Beyond that there is no increase in magnification. Why? I dont know. Maybe this feature was designed on a Monday. Fortunately this can all be rectified with the use of a closeup lens. Now the fz series will react like most other high zoom cameras and do it well. The Olympus b-macro is such a lens. There are many others

Sep 06, 2005 | Panasonic Lumix DMC-FZ10 Digital Camera

2 Answers

If you zoom to less than 12x


Sorry you're having such a problem with the fz1 w/b-macro. Here is a shot of the stock fz1 w/b-macro at full 12x zoom - resized only. Try practicing on still objects such as coins or jewlery. If you are beyond 10-12 inches you are probably too far away.

Sep 06, 2005 | Panasonic Lumix DMC-FZ1 Digital Camera

Not finding what you are looking for?
Cameras Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zoom Cameras Experts

kakima

Level 3 Expert

102366 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

yadayada
yadayada

Level 3 Expert

76691 Answers

Are you a Zoom Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...