Question about Janome 7034D Sewing Machine

2 Answers

Need the tension settings for a Magnolis 7034D machine. Kids turned them all.

Posted by on

Ad

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 539 Answers

I have that serger and manual, and normal setting for right needle is 3, left needle is 3, upper looper is 3, lower looper is also 3. This info for anyone who may not have the manual. Enjoy your Janome Magnolia 7034D serger.
Did this help?
Jimmy
Jimmy

Posted on Mar 31, 2012

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 340 Answers

Hi
There are a partial manuals available for Janome Magnolia machines available on their site.
http://www.janome.com/documents/File/ManualFile/Inst%20Book%207034D%20(English).pdf
The tension settings are included on page 27 of the manual.
Hope this helps!

Posted on Sep 29, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Try sewing but bottom thread on fabric is crumpING UP


needle thread tension is not adjusted up properly tighten the setting until you have resistance when you pull the thread to thread the needle

Oct 02, 2016 | Sewing Machines

1 Answer

Stitch length singer


Run through the "10 minute tuneup" here: https://answers.yahoo.com/question/index?qid=20090925205957AAq0xc4 DO NOT MESS WITH THE BOBBIN TENSION. Top tension setting should be about 3-4. Stitch length probably in the neighborhood of 2.5 - 3.5 mm.

Little kids and sewing machines seem to have a natural attraction, which is why my mom taught me to sew on her machine when I was 5. Sometimes it's easier to teach the kid how to do it right than keep the kid from messing with the machine.

Jun 24, 2014 | Sewing Machines

1 Answer

Timing serger needle


If machine speed is not controllable with your foot controller, you probably need a new controller. These items should be covered by a 2 year warranty from Janome.

Jan 10, 2014 | Janome 7034D Sewing Machine

1 Answer

How about like every other serger seller , you post a video on how to thread the 7034 D magnolia on line?


Hi marion631...

Check out this video on YouTube...shows you how to thread a Janome sewing machine...
Please take time to rate me thumbs up

http://www.youtube.com/watch?v=FsAKxI79BS0

Sep 17, 2011 | Janome 7034D Sewing Machine

1 Answer

I can hear a clicking when serging


Sounds like your looper timing is off. you will have to have your local shop re-time it. Find a shop that gives free estimates first.

Hope that helps,
-Chris

Jun 06, 2010 | Janome 7034D Sewing Machine

2 Answers

I can't get the thread adjusted correctly on my


You did not mention the type of fabric that you are having trouble with. For instance, stretchy fabric may require a slightly different approach. I'll assume that you are using a medium weight woven material.

First of all, ensure that you are using good quality cone thread, such as Maxi-Lock and that your needle(s) are new or in good shape.

Secondly, make sure that each thread is pulled fully into its tensioner, BETWEEN the discs and not behind them or riding on top of them. Grasp the thread from both sides of the tension and pull it through like dental floss.

Test sew if one or more threads was not in the tensioner. If still not good, proceed with the next step.

If you have your instruction manual, look at the page which tells you how to set it up for normal tension. If you don't have a manual, call 1-440-808-6550 and they will send you a free PDF of the manual.

NOTE: Most White 532 tension dials rotate TWO full turns around, so you don't know if you are at 5 or 15.

Turn all of the tension dials to zero, each one should have no tension. Then set the tensions as follows:

Left needle: 7
Right needle: 3
Upper looper: 3
Lower looper: 3

Adjust slightly as needed.


Dec 16, 2009 | Sewing Machines

Not finding what you are looking for?
Janome 7034D Sewing Machine Logo

Related Topics:

268 people viewed this question

Ask a Question

Usually answered in minutes!

Top Janome Sewing Machines Experts

Tally Girl
Tally Girl

Level 3 Expert

1125 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

184 Answers

Irene Tulloch

Level 2 Expert

458 Answers

Are you a Janome Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...