Question about Indesit 23 in. DV62 IX Built-in Dishwasher

1 Answer

Indesit DV 620 Dishwasher: Reaches the end of it cycle then sits for ever with the DRYING light flashing. Cannot reset it or start a new cycle. However, intermittantly it will reset.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi I had the same problem with the ID620. Just fixed it last week. With the ID620 flashing 4 means tha t there is a problem with the heating circuit. Either the element, the stat or the control board. Mine was a problem with the control Board. I took the board out and after some debug found a faulty zener diode. Replaced with new one from Radionics (1 euro) and machine now 100%.

Posted on Nov 15, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Indesit DI 620 dishwasher lights 2 and 4 flashing


Lights 2 and 4 flashing - can't start machine. This fault not covered in manual.

Apr 21, 2009 | Maytag MDB5100A Dishwasher

1 Answer

Indesit DI 620 which won't drain water


this appliance is a built in dishwasher and may have somthing jamming the pump,this can only be acessed from the bottom and may require the appliance being removed,also check that there is not a blockage at he sink.

Apr 19, 2009 | Indesit 23 in. DV62 IX Built-in Dishwasher

1 Answer

Indesit DI620UK Dishwasher fault


If the dry cycle has a problem, check these:

Heating element
Drying fan
Thermostat
Heating element Your dishwasher has an electrical heating element that helps to dry the dishes. If the element is burned out, the dishes won't dry properly, and you need to replace the element.

Drying fan Many high-priced dishwashers have a small fan that blows air or heated air into the dishwasher to speed up the drying process. If the fan is defective, you need to replace it.

Thermostat Some dishwashers have a thermostat that monitors the drying temperature. If the thermostat is defective, the heating element may not cycle on or off properly. If that's the problem, you need to replace the thermostat

Jul 19, 2008 | Dishwashers

2 Answers

Dishwasher indesit DI62


green light 2 flashing sounds like machines doing something switched of at mains & back on to same flashing green light

Mar 01, 2008 | Indesit 18 in. D41 Slim-Line Free-standing...

1 Answer

Indesit IDL40 Slimline Dishwasher - Won't start cycle


indesit idl 40 not pumping water out properly, ends with flashing light no 4 and plates dry but water still in machine -have to pump out using start stop button but within 2 hours base filled up with water. Can't afford massive call out prices as lady on my own.....

Nov 12, 2007 | Indesit 18 in. D41 Slim-Line Free-standing...

2 Answers

Flashing star sign


Try turning off the breaker to it for a few min… and then turn it back on that might reset it.

Nov 07, 2007 | Indesit 24 in. DE73 Evolution...

1 Answer

Indesit IDL 530 Dishwasher Prewash and Drying Light flashing


Ours was doing this and it was because there was water leaking into the base because a crocodile clip had come off

Oct 22, 2007 | Dishwashers

1 Answer

Dishwasher problem


My dishwasher Indesit DI67S will not run on the number 1 cycle. It will fill and then when that programme finishes it jumps straight to the drying cycle missing all the rinses out etc. If on the number 2 programme it goes all the way through but then doesn't dry. I've also noticed that the water doesn't seem to be heating up much and certainly isn't drying. Is this the element or something else? Once its reached the drying cycle the light for this just flashes then I have a job to try and reset the machine. It can take endless attempts. Will switching the machine off at the mains solve anything or is it the element?
Thankyou

Oct 09, 2007 | Indesit 24 in. DI67 Free-standing...

1 Answer

Indesit evolution DE73 frozen program


I have the same problem. You need to switch it off at the mains for at least 20 mins.

Aug 14, 2007 | Indesit 24 in. DE73 Evolution...

Not finding what you are looking for?

Open Questions:

See all Indesit 23 in. DV62 IX Built-in Dishwasher Questions

Indesit 23 in. DV62 IX Built-in Dishwasher Logo

326 people viewed this question

Ask a Question

Usually answered in minutes!

Top Indesit Dishwashers Experts

Ken Johnston
Ken Johnston

Level 1 Expert

56 Answers

yadayada
yadayada

Level 3 Expert

75797 Answers

noel
noel

Level 3 Expert

4740 Answers

Are you an Indesit Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...