How do I restore factory settings on my BlueAnt ST3. I have a new Blackberry and every time I try to pair them the Blackberry comes up with 'Unable to pair with BlueAnt ST3. Try again?' and every time I try it comes up with the same thing. I asked our tech guy he said to restore factory seconds however I can't find anything to tell me how to do that and he doesn't know

Question edited for clarity.
How do I change the language on my BlueAnt st3? November 2, 2021 by anstoall2021
How do I change the language on my BlueAnt st3? From off, press and hold the On / Off button until the Bluetooth® indicator turns blinking red/blue. (The kit is now in pairing mode). Please be patient because the Commute 3 has 12 languages and it will cycle all available languages.
How do I reset my BlueAnt ST3? Reset the BlueAnt device. Press and release the "Vol +," "Vol -" and "Multi-Function" buttons all at the same time. The volume buttons are located on the side of the BlueAnt, while the Multi-Function button is on the front. The BlueAnt resets and clears the existing pairing list.
How do I remove a BlueAnt pair list? On your phone bluetooth menu, search for devices and select BlueAnt ST3 then enter 0000 as pincode. Press the MFB until the LED blinks red/blue. Note: Blackberry and Smart phone owners please refer to section F of user guide. Alleant Phonebook transfer will be initiated.

How do I pair my Supertooth 2? Pairing Mode.
Turn on its Bluetooth function then execute a Bluetooth search so that it will be able to search and find your Supertooth II. When the phone displays the list of the Bluetooth devices it has found, select the name of this kit (Supertooth II). 5. When the phone asks for a passcode, enter "0000".https://www.google.com/search?q=blueant+st3+change+language..

To connect iphone 4 to Blueant when its not responding, try turning off the Blueant using the Green MFB. Once it has powered down hold the green MFB and either one of the volume control buttons until a siren sound goes off. The voice will say a few things and then it should be reset. Turn off again and then back on again and it should be ready to discover your phone.

Darrell 12/11/2010. make sure you have the phone set to sync then press green button on ST3 until it ask what language you require keep it pressed until it states on the screen that you want to sync press ok and you will find that it has connected. You can use the same system to sync it to an I Phone as well

it will not pair.i have a blackberry curve

initially check whether both the devices are compatible when your pair them. Then try to give the same passkey on both the devices like 1234 in your blackberry and also same 1234 on your blueant ST3 and check.

I had similar problem with Motorola and Blackberry Perl. It seems that the device may have been used or demoed at the store, and had to be re-set to factory defaults. The procedure is simple.

1. Make sure that the device is OFF
2. Press and hold Volume UP and green ON buttom at the same time
3. After reset, power the device OFF and wait for approximately 10 seconds
4. Power the device ON, select a language, and follow voice prompts to complete pairing

I had similar problem with Motorola and Blackberry Perl. It seems that the device may have been used or demoed at the store, and had to be re-set to factory defaults. The procedure is simple.

1. Make sure that the device is OFF
2. Press and hold Volume UP and green ON buttom at the same time
3. After reset, power the device OFF and wait for approximately 10 seconds
4. Power the device ON, select a language, and follow voice prompts to complete pairing

1. If the Supertooth 3 is on, turn it off by holding down the green Multi-Function button for about 5 seconds (until you hear a voice announce "BlueAnt ST3 powering down").
2. Hold down "Vol +" and the green Multi-Function button until you hear a loud siren/distinctive tone.
3. The Supertooth 3 will turn on. Hold down the green Multi-Function button for about 5 seconds to turn it off again.
4. The Supertooth 3 has now been reset: all pairing and other information has been deleted. When you turn the Supertooth 3 back on again it will prompt you to select a language and then go into pairing mode.

You will now need to re-pair your phone with your Supertooth 3.

Go to this page, it will answer any question concerning the blueant .. including pairing to your phone .. activating your blueant etc http://www.blueant.com.au/index.phpalso gives you step by step instructions on codes, pairing etc

Make sure the BlueAnt Supertooth 3 is turned OFF.

1. Press+Hold the Volume Up button and then also press the green button to reset the unit.
2. After completing the above reset, turn the ST3 OFF again and wait at least 10 seconds.
3. Turn unit back ON and select language when prompted.
4. Follow the voice prompts and pair the ST3 with your blackberry as normal.
5. After pairing has completed you will hear the ST3 announce “loading phonebook – please wait”.

When your blackberry ask your permission to allow bluetooth to connect and donload phonebook allow it permanently.