Question about Televison & Video

1 Answer

V Chip accidentally set

Somehow the V chip was accidentally set on our Sansui TV, Model TVS2746, manufactured in 2002.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,712 Answers

Can you kindly clarify the issue further?

Posted on May 24, 2008

  • 2 more comments 
  • Swilin Sampson
    Swilin Sampson May 24, 2008

    All you have to do is turn the TV on and turn to a channel that doesn't
    prompt the V-chip password (even if it's snowy) and hold down the
    volume (down -) button on the main unit while holding down the number
    "0" on the remote control. It might take a few tries, and you might
    need to change the TV channel for some reason but if done correctly,
    either the TV will turn off, or the menu screen will pop up and ask if
    you want to set the vchip password, either way you should be able to
    watch your TV now! :)

  • Swilin Sampson
    Swilin Sampson May 24, 2008

    or try this:

    Press the following
    buttons on the remote, one at a time. (Note: You must be in the
    password entry screen) Press, Mute, Display,Clear and Reset, this
    unlocks parental controls and you can now re-enter a new password.
    OR TRY THIS..
    Press
    and hold Menu on the TV AND volume down on the remote for 3 seconds.
    Nothing will appear on the screen, and the Parental Controls will
    unlock, and you can re-enter a new password with the LOCK PARENTAL
    CONTROLS




  • Swilin Sampson
    Swilin Sampson May 26, 2008

    Hello JayneH,

    Sorry to trouble you, but could you kindly take a minute to "Accept" my solution, as it seems that you had accidentally accepted the wrong solution :) That has been revoked by the Fixya Admin, but I will need you to Accept my solution again, for me to get credited for the resolution of this issue...

    Thanks in advance,
    IrishDruid.


  • Swilin Sampson
    Swilin Sampson Jun 03, 2008

    Hello JayneH,

    Sorry to trouble you, but could you kindly take a minute to "Accept"
    my solution, as it seems that you had accidentally accepted the wrong
    solution :) That has been revoked by the Fixya Admin, but I will need
    you to Accept my solution again, for me to get credited for the
    resolution of this issue...

    Thanks in advance,
    IrishDruid.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can I get a code for a v-chip sansui tv model tvs2746


If you do not remember the lock code, you can make it override, and can setup an other lock code. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" or "Magazine" will make surf easy Pull up older posts. Surf the site with patience.
http://electronicshelponline.blogspot.com/
V-Chip inlock procedure to mmany popular model TVs are given.

May 08, 2014 | Sansui Televison & Video

1 Answer

I have a sansui v chip tv with no remote. I have purcahsed a universal remote, will it work with the v chip tv. Or do you guys a a code I should use. If not how can I get the tv on input so that we can...


yes. you could purchase a philip brand universal remote control to use your sansui tv & set up & enjoy your game. code# is0115,or #0632 or #0041. please try each one. good luck!

Jun 06, 2011 | Sansui 27" TV

1 Answer

I have a RCA RCU403 universal remote I need the tv code for a MAGNAVOX tv


RCU403N is the remote, and Sansui TV model NO.TVS2746. need code for remote

Aug 11, 2010 | RCA RCU403 Remote Control

1 Answer

My tv is sansui waht is the code numers?


RCA remote RCU403N, Sansui TV model NO.TVS2746

May 03, 2010 | RCA RCU403 Remote Control

1 Answer

My Sansui TV was struck by lightning and the repair company cannot get the part STRF 6686 to fix it.


Hi
That is an odd regulator chip that you seek, so odd, that there is not a listing anywhere. Even with the people that make the chips in this series. Can you please check that it is not an STRF6656 or an STRF6668. These at least have datasheets from suppliers, meaning at some point they were obtainable. It may be if the set has been hit by lightning, that the chip is actually burnt, and the numbers a little hard to see. It is possible that it is a low volume part made specially for sansui, but I doubt it.
What is the model of the TV as well. Cheers
regards robotek

Apr 19, 2010 | Sansui 27" TV

1 Answer

My Sansui DTV2798 is V-Chip protected I need a code.


I HAVE A SANSUI TV MODEL DTV2798 AND THE VCHIP IS ACTIVATED. I DO NOT HAVE THE CODE. DOES ANYONE KNOW HOW TO FIX THIS ISSUE?

Mar 01, 2009 | Sansui 27" TV

1 Answer

Need to disable V chip for Sansui TVS 2746 27"Tv


Call the customer service number on the set.

Oct 22, 2008 | Sansui DTV2760 27" TV

1 Answer

Sansui TV, V chip accidentally set


If you are on a protected channel where you are getting the "Protected Program by TV-etc" you have to get out of that channel and go to a channel that is not protected. That will allow you to hit your "Menu" button and access the V-Chip settings on your TV. Depending on the type of TV you have, you may end up using your Vol Up button as a sort of "Enter" button. Hope that helps!

May 24, 2008 | Televison & Video

1 Answer

HELP ME PLEASE............


Hi,

You need to be more specific with the model number. Most Sansui TVs have model numbers like "SAN2701" plus a version letter like "Version A"

Additionally, procedures for removing the Child Lock, Panel Lock and TV Lock are in the users manual.

In some models, for the V-Chip, the original code is 000000, if you want to clear the code, please press the keys VOL + and VOL - on the front panel at the same time.The password of the TV's V-Chip Set up or Movie V-Chip Set up may be changed at any time. Press UP or DOWN to input the password,then press to select OK or Cancel. Press menu to confirm your input.

Hope this be of initial help/idea. Pls post back as to the exact model and version of your Sansui TV, how things turned up or should you need additional information.

Good luck and kind regards.

Thank you for using FixYa.

Mar 31, 2008 | Panasonic TH-37PX60U 37 in. Plasma HDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

72620 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

yadayada
yadayada

Level 3 Expert

70346 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...