Question about Danby DWC286BLS Compact Wine Cooler

1 Answer

Our danby wine chiller DWC286BLS has not been plugged in or used in several months and is not cooling. The temp readout seems fine, but no cooling. Any ideas on how to troubleshoot?

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 20 Answers

Is the compressor running if so is the little line coming out of the compressor hot after the compressor has ran for 20 minutes.

Posted on Sep 29, 2010

  • 3 more comments 
  • dbromfield Sep 29, 2010

    Yes the line is hot and the temps are just sitting at 80 degrees???

  • appmed Sep 29, 2010

    push in the door switches

  • dbromfield Sep 29, 2010

    Door switches pushed in as the light goes out. left running overnight and still no joy.

  • appmed Sep 29, 2010

    Did you hear the fan come on?

  • Kyle Smith
    Kyle Smith Jul 26, 2017

    My Danby Sillouete

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Its stays to cold it freezing the drinks no matter were you set the temp. I have a kenmore 461.99100


i had the same problem. i ordered the circuit board as well as the red sensor. the problem was the sensor but because i had the unit apart i replaced both parts.

Apr 17, 2011 | Danby DWC286BLS Compact Wine Cooler

1 Answer

Haier Dual Zone Wine Chiller - One Fan wont run


I have the same problem. When I first discovered this, both fans had stopped working and the temp for both zones was over 80. So much for the wine that had been stored there. After leaving the unit unplugged for a few days, the fan for the lower section started working again but the upper fan is still overheating. Haier customer service says too bad, so sad (I discovered this problem in the 13th month of ownership). I'm sure it is not worthwhile to fix this so it is going out with the trash and I'll look for a different brand for the next wine cellar that I purchase. Any ideas?

Mar 01, 2009 | Refrigerators

1 Answer

Avanti Wine Refrigeraator


thanks for the question i think the problem is that its under the counter no air flow to cool the coils try it not under counter thanks the appliance doc

Sep 24, 2008 | Danby DWC283BLS Wine Cooler

1 Answer

Wine cooler doesn't cool


you need to turn the temp. setting all the way up,use a rag to hold the fan,now see if the compressor. is running,let me know-mike

Jul 11, 2008 | Danby Silhouette DWC512BL Wine Cooler

2 Answers

I have a magic chef wine cooler (Model MCWC50DBT) and the labels keep falling off of the bottles. The temperature is set to red and we don't seem to have any other problems.


All the wine chiller set 2 temp red and white, red wine temp only for 18- 20 oC , your using white wine don't set red wine temp , set only for white temp mode,white and red wine set temp are different temp

May 27, 2008 | Magic Chef MCWC30MCG Compact Wine Cooler

3 Answers

Danby DWC283BLS Wine Cooler - Error message E3 & E4


Is the compressor running? I don't know this unit, but know that if you are too warm that is the first thing to check. In reading about another unit that had a different problem, it was mentioned that there is a ciruit board. If it has relays on it then these are the most likely culprit. They are either not making contact or staying in contact too long... sometimes just tapping each relay usually a black plastic component will cause it to work intermittently..Not sure if you can get these but call the company help line at 1-800-263-2629.

Jun 12, 2007 | Danby DWC283BLS Wine Cooler

Not finding what you are looking for?
Danby DWC286BLS Compact Wine Cooler Logo

517 people viewed this question

Ask a Question

Usually answered in minutes!

Top Danby Refrigerators Experts

William Miller
William Miller

Level 3 Expert

9047 Answers

Devabhakthuni...
Devabhakthuni...

Level 2 Expert

225 Answers

Cindy Wells

Level 3 Expert

5163 Answers

Are you a Danby Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...