Where can i find information about a kitchenaid side by side model number KSRT25FWM501

There should be a few more letters and numbers in the model number. I suspect the 1 should be read as an I. Look up your model here: https://www.kitchenaid.com/customer-service/manuals/ .

For the KSCS25INMS03, there are set screw on the top and bottom of the handle for the freezer. The screws are visible from the side of the handle facing the refrigerator section of the side-by-side design. See the freezer door parts diagram for your model. One model parts diagram is here: https://www.kitchenaid.com/digitalassets/MLPDF/Repair%20Part%20List%20-%20W10128953.pdf .

I hope this helps.

Cindy Wells

That information is in the user manual that covers your model number. Below is the procedure for a Side by Side. To look for your manual click=> HERE
Press and hold the Water Filter button
on the Ice & Water Dispenser control
panel for three seconds. When the display
changes from "Red" to "Green," the status
has been reset.
I am here should you need me, Thanks John Tripp Appliance 911
Contact Me Here

Many different possible causes. We'll need more information to troubleshoot this

Which model dishwasher do you have? KitchenAid has the manuals for many of their appliances here: http://www.kitchenaid.com/flash.cmd?/#/page/customer-service . Click on the Locate Manuals and Guides option on the right side of the page. You can find your model number on the left edge of the dishwasher door. (When the door is open, the plaque is visible.) If the model is also sold at Sears, Manage My Life will probably have the manual. See http://www.managemylife.com/mmh/owner_manuals .

If you add a comment with your model, I'll be glad to provide more information and the direct link to the manual.

Cindy Wells

Serial nuber needed for this information.

There are a number of variations in their products. The reason is that they do different production lines for some of the same models. Many of the manufactures do this for a number of reasons.

The best way to service these products is to call their factory service. The service rep has all the necessary factory schematics, engineering information, and the resources to have the proper parts and replace them. When using the factory service, all their work is gauranteed. When you fix it yourself, you are on your own.


Jerry G.

look for a round peice on the kickpanel at the bottom of the unit it twists and slides out

Open the drawer or bottom cover panel and look on the facing where the door closes to

What is your model number and I will tell you what kind, and where to get a new one....Model number is located on upper inside of refrigerator