Question about Toshiba Satellite A105 Notebook

1 Answer

Printer problems Kodak EasyShare wont allow me to select a printer

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 859 Answers

Hello,

I guess you're using XP. From the Start Menu, click on Printers. Is your primary printer marked with a check mark indicating it is the default Printer?

If not, click on your Printer and then click on 'set as default'. Reboot your machine. Kodak should find your printer now.

Let us know if this fixes your problem or not. If not, we'll take you through the next step in trouble shooting. OK?

Best Regards,
Worldvet



Posted on May 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kodak printer junked and replaced with hp printer but error for the kodak printer pops up on every startup


It sounds like your computer is still trying to communicate with the old printer. In the control panel, under "Programs" / "Uninstall a Program" find anything referring to the Kodak printer or Kodak printer software and uninstall it. That should also free up resources on your computer. You may also want to check under Printers to make sure the computer doesn't still have a profile for the old Kodak.

Feb 11, 2013 | HEWLETT-PACKARD HP G62 Notebook

2 Answers

Won't let me set new printer as default


Click start control panel administrative tools computer management then select event viewer this may vary depending on what operating system you have extend the events there you will see errors in red you will no what exactly what the error was and at what time it occured Right click on the error message select properties you will see all details about the error or click start type in event viewer press ENTER you might be able work your way through the problem
You can change the default printer to any other printer that you have connected to your computer. This will simplify your printing tasks, since you can select the most frequently used printer to be the default. These instructions are for Windows 98. Instructions for other operating systems or versions may vary.

Click on the Start menu and click on Settings, then Printers. A window will appear showing the icons of all the printers that are installed on your system. Right-click on the icon for the printer you want to use as the default. A menu will appear. Click on Set as Default. To make sure the correct printer is now set as the default, right-click on the printer icon again. When the menu opens, a check mark should appear before Set as Default. Default Printer for All New Users b> Microsoft Windows supports a number of printers connected to any one machine. Windows allows users to customize their preferred printer for one-click and quick printing. If you create a new user on a Windows system, the default printer will not be set. Windows 7 allows you to configure a default printer for all users with a quick command-line setting. You must have Administrative access to the system and have the printer configured to run this command. b> Click "Start" and type "Command Prompt" in the Start menu. Press "SHIFT"+"ENTER" to run the Command Prompt with Administrator privileges. Click "Start" and type "Print Management." Press "Enter." Look at the name listed under "Printer Name" for the printer you would like to make default. Double-click it to open the "Properties" dialog. Right-click the highlighted "Printer Name" label and click "Copy." Return to your console Window and type "ntprint /setdefault name=<printer name>" and press "Enter." Replace <printer name> with the printer name on your clipboard. You can paste this by right-clicking the console window and clicking "Paste."
http://technet.microsoft.com/en-us/library/cc731857.aspx

Jan 28, 2013 | Toshiba Satellite L505DGS6000 Notebook

1 Answer

Connecting to my wireless printer


This link should take you to the download page for the driver and application download for your printer. You will want to download the software by saving it to your desktop, then double clicking on the icon to start the installation.

http://support.en.kodak.com/app/answers/detail/a_id/32108/selected/true

Dec 09, 2011 | Acer Aspire One Netbook 8.9" Notebook

1 Answer

Printer does not start. It says Printer Error. (Code 6202)


I can only assume that your printer is a kodak one.


here is a link to help you solve your problem. Hope it helps!

http://support.en.kodak.com/app/answers/detail/a_id/1247/selected/true

Sep 24, 2011 | Computers & Internet

1 Answer

What ink jet printer is best to use for a lenovo T61 ThinkPad?


Virtually any inkjet printer works with your Laptop. Factors to keep in mind are the cost of the printer and cost of the ink cartridges. Printer manufacturers make the printer very inexpensive but the cartridges not!
Also the purpose of printer. Photo printing or general use?
Before buying any printer look at the cost of replacement cartridges. Kodak is one company currently keeping the price of their cartridges low. This does not mean they are the best printers out there. HP Lexmark Epson Samsung and many other make printers.
Quality of printing shown by DPI dots per inch information Price of the printer should not be a major factor in selecting printer Price of cartridges should be taken seriously as the recurring expenditure increases with that!
good luck!

Sep 10, 2011 | Computers & Internet

2 Answers

Toshiba laptop running Vista won't connect to Kodak ESP7 Printer


Connecting Kodak ESP 5250 Printer to Windows Vista PC through Wireless Network.

After following the initial steps in the Start Here booklet that comes with the printer (unpacking, connecting power, inserting print-head/ink-cartridges and calibrating) I connected the printer to my computer through the USB cable as per page 7 of the booklet because I needed to get started printing quickly. Two notes: the USB cable supplied was pretty short and wouldn't work with an extender-I'm not sure why-so I used an older, longer one I had. And as with most printers, do NOT connect the USB cable right away. Start the software installation first and only connect when it tells you to. I downloaded the latest version of the printer software from Kodak, but I don't it made much difference and it was a very large download.

To go wireless the first thing you need to do is get the printer onto your network. Do this by turning the printer on and pressing the Menu button. On the printer's LCD screen cursor down to and select Network Settings then WiFi Setup Wizard. At this point you need to have some familiarity with your wireless router and the security routine(s) you are using. Pages 8 and 9 of the Start Here booklet walks you through these steps. I don't used data encryption (probably should, but too lazy and also wonder if it will reduce transmission speed), but I do use MAC filtering to keep unknown devices (like my neighbor's computers) off my network. The booklet does not address this. If you are not using data encryption (I think WPA-2 is current the standard) you should at least use MAC filtering. If you use data encryption you don't really need MAC filtering, but some folks use both. MAC filtering works like this. Every wireless device has a unique MAC address that is put in when manufactured. It is permanent and not shared with any other device in the world. If you turn MAC filtering on in your router configuration, then you must enter into your router a list of all devices that you want the router to allow onto the network. Anything that is not on the list will not be allowed on. This gives you absolute control over who/what gets on your network. But unless you also use data encryption, the data transmitted between your computer and your router could possibly be picked up and viewed by others. This would require some pretty special equipment, not something your neighbors could do with their home computers, but it does exist. The other thing is, with some devices it is a bit of a struggle to find the MAC address. I had a hard time with my netbook that uses a UNIX operating system, but finally got it. If you are using MAC filtering you can find the printer's MAC address by going to Network Settings then View Network Configuration and scrolling down to the bottom. Anyway, once your printer is truly connected to your router you should see a blue WiFi indicator at the bottom right of the printer's main screen (the one with "Kodak" in red letters in the top half of the screen). If you are still in the menu screens you can go to the main screen by pressing the Cancel button on the printer.

Connecting the printer was the easy part. Getting the computer to talk to it is not so easy. If you connected by USB first, unplug the USB cable. If you were connected by USB you already have the software installed. If not, now's the time, either by disk that came with the printer or by download from the Kodak Help Center (just search this term). Be advised, the download is large and takes some time. The software will install the Kodak AiO Home Center on your computer. After you install it, it will be found in the Kodak folder on the Start Menu. No indication is given, but at the same time AiO is installed the Bonjour Printer Wizard is also installed in a separate Bonjour folder on the Start Menu. More on this in a minute. If by some strange quirk of fate your printer will now accept documents from your computer through your network that's great. Mine didn't so I finally called Kodak's printer support number and after a very short wait (good on you, Kodak!) I got the following help. The first part was to make sure my computer and printer could talk to each other through my wireless network. This was done by "pinging" the printer from the computer. You will need the printer's IP address which can be found under View Network Settings (see above). It consists of 4 numbers separated by periods. The numbers can have anything from one to three digits each. Once you have the IP address available, click on the Start button at the bottom left of the Windows screen. Then click on All Programs. Open the Accessories folder and start the Command Prompt. This should open a box with a black background with a command line ending in "

Jan 11, 2010 | Computers & Internet

1 Answer

Can not load kodak easyshare software can't get pictures from camera


It sounds like the software didn't install properly, uninstall the easyshare software and reinstall it. If it still doesn't load properly, then it could be a corrupt disc. Go to Kodak's support site and download the software there. I have a Kodak and I know that once you register the camera with Kodak at their site you are eligible for their software, software updates, and support. The last time I had to replace my hard drive, I had to go to Kodak and download the easyshare software and updates.

Jul 15, 2008 | Dell Inspiron B130 Notebook

1 Answer

Laptop doesn't recognize my printer


unusual not to be recognised, assuming you have followed the instructions word for word, eg not connected the printer until told to etc, you may have a problem with the usb port and not the printer, so to illiminate this try installing in a different usb port. Also try this driver from the Samsung web site http://www.samsung.com/Products/PrinterandMultifunction/BlackWhiteLaserPrintersforHomeandHomeOffice/ML_2010XAA.asp If still no luck then it's either the printer or a usb port problem, to illiminate the usb fault, go to my computer, right click>properties>hardware tab>device manager> and go down the bottom of the list to usb controllers, click on '+' sign, right click and select uninstall. Restart pc and all the usb controllers will be re installed automatically. Try the printer again, if still not installing the fault must be the printer.

May 06, 2007 | Toshiba Satelite A10 Notebook

Not finding what you are looking for?
Toshiba Satellite A105 Notebook Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18330 Answers

joecoolvette
joecoolvette

Level 3 Expert

5660 Answers

Are you a Toshiba Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...