I have a GE wireless mouse = 98563, bought about 2 weeks ago and have used it only a couple of times however recently i have developed problems with it, I bought a new pack of triple As and even then the...
1. Go to manufacturer's website and download the driver for the correct MODEL of
2. Install mouse driver. Go "Control Panel" to configure mouse
3. o/s XP, right mouse click "My Computer" go Properties,
Hardware tab, Device Manager, scroll down to "Mice and other Pointing Devices"
to see if it is registered, and also check "USB Human Interface Device" in the
same window to see if your usb connections are functioning. There should be NO
YELLOW question marks in this window pertaining to USB and Mice Pointing
If it was a wired mouse with no name or model, you can just plug
it into the ports and it will work. Unfortunately, since it is wireless, you
MUST have the correct drivers(software that allows your computer to communicate
with the device), and the only way you can get the correct drivers is through
the manufacturer and choose the right model.
The USB device has what appears to be a circle with dots connected to it facing
the port. The dots are actually the word "Connect" in infintessimally small
letters. Plug it in, then use your thumb to press down on the circle while using
another finger to press up on the device's underside - in effect, squeeze it
between your fingers where the circle is. You'll see a red light blink. At that
point you can push the "connect" button on your mouse and it will work.
Nov 20, 2010 |
GE Wireless Optical Mouse