Question about RCA Universal Remote Control
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
With your model number at hand, check the RCA website for a later code list.
If you are the exception, you might find one.
Most all remotes have a 'search' function that lets you scan through all of the available code sets but this feature will, in most cases, provide only minimal functionality such as Power, Volume and Channel.
In truth, there isn't any such thing as a 'universal' remote, including the 'learning' remotes; I have one of those and it is unable to 'learn' from either of my later sets' remotes. At best, these should be called (honestly) 'multi-brand.'
Posted on May 17, 2009
SOURCE: CODE FOR RCR312W FOR MY APEX TV
Turn on the TV, Press and hold down the TV button while entering one of the four digit codes, if the ON/OFF turns off on the last digit entered, that's the correct code, if not, repeat steps, using a different code until it does..here are the codes,..1137,1141,1235.....hope this was helpful...
Posted on May 28, 2010
Hi! There are two ways on how to program your RCA Universal Remote Control. First is the direct code entry. In following these steps you need to provide me the type and brand of the device you want to be programmed to your remote control so I can give you the code for that certain device. Since you did not indicate the information I need for the code I will advise you to do the second way which is the Auto Code Search. Here are the steps for you to be able to program your Universal Remote without the code list.
1. Manually turn on the device you want to control.
2. Press and hold the device key you want to program. While you’re holding down the device key, use your other hand to press and hold the remote’s POWER key at the same time.
3. Wait until the remote’s indicator comes on and stays on. Then release both keys.
4. Point the remote directly at the front panel of the device you want to control. Press PLAY on the remote and wait 5 seconds. The remote is testing a batch of 10 codes on your device.
Did your device turn off?
YES: Go to step 5.
NO: Press PLAY again. The remote tests the next batch of 10 codes.
Keep pressing PLAY every 5 seconds until your device turns off.
5. When your device turns off, press the REVERSE key on the remote
and wait at least 2 seconds. The remote tries the last of the previous ten codes.
Did your device turn on?
YES: Press the STOP key. You’re done! You’ve programmed this device key.
NO: Press REVERSE again. The remote tests the next code in the batch. Keep pressing REVERSE every 2 seconds until your device turns back on. When it does, press STOP.
Note: If you accidentally press the REVERSE key after your device turns on, press the FORWARD key. Then, wait two seconds to see if your device turns off again.
Posted on Jun 14, 2010
Tips for a great answer:
Dec 28, 2012 | RCA Universal Remote Control
Oct 18, 2012 | Audiovox Universal Remote, NaviLight 6, 1...
Oct 11, 2012 | Apex Digital Apex Apex Remote Control Oem...
Oct 25, 2011 | RCA 3-Device Universal Remote
Jul 27, 2011 | RCA RCR-3273 Remote Control
Oct 06, 2009 | RCA RCU800 Remote Control
Jul 10, 2009 | Directed 434MHZ Remote Control
333 people viewed this question
Usually answered in minutes!