Question about Ryobi 15" Electric Factory Reconditioned Trimmer (ZRRY41002) - Factory Reconditioned

1 Answer

Ryobi weed trimmer

How do i insert the string? how do i open to insert new string?

Posted by on

  • 1 more comment 
  • Anonymous May 28, 2008

    how do re string it

  • Anonymous Jun 08, 2008

    how do i get spool off ryobi 31cc gas trimmer

  • Anonymous Jun 21, 2008

    what hole and which way does the string go

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have one of this trimmers. It is simple to replace the line. 
-First line up the arrows on the bottom of the spindle. 
-Then feed the line back in one of the holes in the side of the spindle (this is the same hole that the cutting string comes out of). 
-You will see the line come out of the bottom of the spindle. 
-Take that line a place it in the hole on the bottom of the spindle. 
-Leave about 9 feet of string hanging out of the weed eater (do the same with the other side). 
-Then turn the inside wheel (I can't remember if it is clock wise or counter clock-wise but it will only turn one way) most of the string is rolled into the spindle. 
-Cut the string of about 5 inches out of the weed eater. You're ready to cut!

Posted on May 31, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fuel mixture ratio for Ryobi SS300 weed eater


Are you sure about the model number? I see several 30CC engine string trimmers by Ryobi. Two are the Ryobi RY30040B (SS30) and a RY30544 (SS30).

For both of these models, mix a high quality 2-cycle engine oil at 2.6 oz. per gallon of gasoline to pour into the gas tank. This ratio is used in several other Ryobi string trimmer models. Many Ryobi product manuals are available here: https://www.ryobitools.com/power-tools/support/manuals . Most Ryobi gas powered and 40V battery-powered tools will have a model number that starts with RY. The 18 V battery powered models often start with a P.

I hope this helps. If you add a comment with the actual model number, I may be able to provide more information.

Cindy Wells

May 20, 2016 | Ryobi Lawn Trimmers & Edgers

1 Answer

Ryobi electric hybrid weed eater quit working.


are there weeds stuck under the trimmer head causing it to work too hard perhaps and even short cords if not heavy enough will cause problems and burn out the motor

Jul 18, 2015 | Ryobi Lithium Ion 18 Volt 18v Cordless...

1 Answer

How to restring cordless weed trimmer


Make a sharp bend in the line and insert it into the hole in the spool hub. Start wrapping the replacement line in the direction shown on the spool.

Jul 25, 2014 | Ryobi Lithium Ion 18 Volt 18v Cordless...

1 Answer

Why is my ryobi 18 volt trimmer smoking? I have had this 2.5 years and using it on lawn edges only.


The motor is failing. Most likely the brushes have failed, but this is all sealed and they cannot be replaced alone.

Jun 10, 2014 | Ryobi 18 Volt 18v Cordless String Trimmer...

1 Answer

How do you put the weed wacker "string" in mine keeps flying out when I rev it up to weed wack


You need to give close attenttion to the string wrap" arrows" or guides and see if there are holes the size of the string your using is correct size to fit into these "grip holes inside the casing.

Please rate
tk u

JJ

Mar 17, 2009 | Ryobi Lawn Trimmers & Edgers

Not finding what you are looking for?
Ryobi 15" Electric Factory Reconditioned Trimmer (ZRRY41002) - Factory Reconditioned Logo

818 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ryobi Lawn Trimmers & Edgers Experts

Jim Parker
Jim Parker

Level 3 Expert

1040 Answers

Tim Whalen

Level 3 Expert

3056 Answers

Dwain Pippen

Level 3 Expert

376 Answers

Are you a Ryobi Lawn Trimmer and Edger Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...