Question about Omega 1000 Juice Extractor

2 Answers

My Omega Juicer 1000 shakes violently and the entire machine rotates unless I firmly hold it or turn it off. It's been in the closet for good seven years before I took it out and started using it. It's been in use for around 4 years with no problem before, but this is the first time I've seen the juicer vibrates so much that the whole machine rotates with it. Any suggestions??

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 356 Answers

Make sure the bottom of the feed chute is not damaged. If it,s chipped or scored, try filing
it down level as best you can. Then with the juicer fully assembled, unlock the set screw
on the center of the bottom and turn it clockwise until the chute contacts the blade, then
back it off a half turn and lock it down. By the way a dull worn blade will produce less
vibration. I'm assuming the lid is plastic.

Posted on Feb 02, 2011

  • Robert
    Robert Nov 01, 2013

    THE SOLUTION TO VIBRATING. If it spins up ok and starts vibrating suddenly as you are feeling it, here's the solution: feed it very, very, slowly. that's it. i couldnt figure mine out, then realized that if i fed it slowly, it was just fine.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

THE SOLUTION TO VIBRATING. If it spins up ok, and starts vibrating suddenly as you are feeling it, here's the solution: feed it very, very, slowly. that's it. i couldn't figure mine out, then realized that if i fed it slowly, it was just fine.

Posted on Nov 01, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does juicer not start when assembled and plugged in?


It has a 10 year warranty, but check the instructions as there are bound to be safety features on it to stop it working unless properly locked together.

Omega BMJ330 Commercial 350 Watt Stainless Steel Pulp Ejection Juicer...

Review

Omega BMJ330 Review JuicerReviewsDirect com

Manual is here. Doesn't look as if there are any safety interlocks in the drawings. Aha, there is a safety lock! It is good to read to the end :>) Page 23 states;

IF YOUR JUICER ISN'T WORKING
If the latch arm on the right side is not secure and properly in place the juicer's safety switch will not engage. Therefore, the juicer will not work. Assemble the juicer properly.

https://www.omegajuicers.com/media/manuals/EFS_BMJ330_390_Manual_JUNE2014_web.pdf

Aug 22, 2014 | Omega Juicers BMJ330

1 Answer

My omega 1000 juicer won't turn on - I just bought it today.


Make sure it is assembled correctly and the latch arms snap shut completely
without any undue force. Also on the bottom of the juicer there should be a
reset button that might have tripped, just push it in. Other wise give Omega
a call.

Apr 23, 2011 | Omega 1000 Juice Extractor

1 Answer

After juicing a few carrots[some of which were cut on a slant], or several spinach clusters, the machine seems to get off balance and begins shaking violently and making a racket at which point I have to...


There's nothing wrong. These juicers do not eject the pulp and go out of balance very
easily. If you continue to have problems you may have to go for a different type of juicer.
The Hurom or Omega VRT, expensive, look good if you're really into juicing.

Mar 05, 2011 | Omega 1000 Juice Extractor

1 Answer

I have an Omega Juicer Model 1000. When I try to juice citrul fruit. The jicer may only turn for a second or two than stops. When I push down on the citrus it oftentimes will not operate.


If you're talking about the citrus attachment, there may be a
problem with the gearing inside. I have one for my Acme
which I don't use because of it's awkwardness and juice
splattering characteristics. Better off with an inexpensive
citrus juicer and leave the Omega to its carrots and apples.

Feb 08, 2011 | Omega 1000 Juice Extractor

1 Answer

Juicer just stopped working


call or email omega url:omegajuicersdirect.com

Jun 29, 2010 | Omega 1000 Juice Extractor

1 Answer

Need to replace latch arm omega juicer


First thing to do is call Omega and order a pair
at 1 800 633 3461 and also ask them for tips on
how to remove and install the arm. If your juicer
is older the new arms may not be an exact fit, and
you will have to do a little filing and improvising to
install them. Its helpful to remove the 4 screws on
the bottom to separate the base for better access
and view of the situation.

May 20, 2010 | Omega 1000 Juice Extractor

1 Answer

HI, I have omega 1000 juicer, and the latch arm was broken. I ordered the replacement latch arm online. I received my order today and there is no intruction how to replace it. I looked in omega 1000 manual...


There are no instructions. Call Omega 1 800 633 33461
for advice. Also new arms on an older juicer may not
be an exact fit so you might have to do a little filing
down on the arm to get it to fit. You can remove the
4 screws on the bottom to separate the base and get
a clearer picture of what you have to do. Basically
you have to pry the base of the arm away and push
up to remove it. If you're not handy you may need
some help cause it gets tricky.

May 08, 2010 | Omega 1000 Juice Extractor

1 Answer

I have an Omega juicer. I need to ajust it because it tremble too much Thank you


THIS IS A NON EJECTION PULP JUICER AND THEY
WILL VIBRATE LIKE MY ACME. BEST FOR HARD
PRODUCE LIKE CARROTS, APPLES, CELERY ETC.
FEED PRODUCE SLOW AND STEADY.

Oct 02, 2009 | Omega Juicers Juicer 1000 Brand: Omega

2 Answers

Right Arm of Omega Juicer Model 1000 broke off


CALL OMEGA 717 561 1105 THEY HAVE
THE LATCH ARMS. CHEAP. ASK THEM FOR
THERE ARE TO WAYS TO REPLACE THEM.

Jan 25, 2009 | Omega Juicers Juicer 1000 Brand: Omega

1 Answer

One bracket broke. Tried to glue it with no success.


IF YOU ARE TALKING ABOUT THE LATCH ARM, YOU CAN BUY THEM FROM OMEGA AT
717 561 1105. TRICKY TO REPLACE. I REMOVED THE BOTTOM OF THE MACHINE AND
GAINED ACCESS THAT WAY. ONCE YOU SEE THE LATCH ARM SUPPORT PRY IT AWAY
FROM THE JUICER AND SLIDE IT OUT. CALL OMEGA THERE ARE 2 WAYS TO REPLACE
THE LATCH.

Sep 29, 2008 | Omega 1000 Juice Extractor

Not finding what you are looking for?
Omega 1000 Juice Extractor Logo

Related Topics:

1,170 people viewed this question

Ask a Question

Usually answered in minutes!

Top Omega Juicers Experts

Andrew Taylor
Andrew Taylor

Level 3 Expert

14824 Answers

eyecam

Level 2 Expert

87 Answers

Tom Chichester

Level 3 Expert

34170 Answers

Are you an Omega Juicer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...