Question about Audiovox Car Audio & Video

2 Answers

Need the output wiring diagram for a AUDIOVOX 93-im-ETX radio

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Wiring diagram for Audiovox 93-IM-ETX
Figured it out by taking radio lid off and following the leads:

Black/white--ground (-)
Green/white--battery (+, that is, always on)
Orange/white--ignition/ACC switched power
White--left front +
Red--Left rear +
Blue--right front +
Yellow--right rear +
Light Green--negative for front speakers
Purple-negative for rear speakers

Posted on Feb 25, 2011

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Dose not trun on

Posted on Apr 22, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wiring diagram on a c525 audiovox


They don\'t release those. Try telling us what you want to do, I may know. Understand, anything to do with power output is illegal to modify.

Sep 19, 2014 | Radio Communications

1 Answer

I have an Audiovox XM receiver that has no audio output. I tried another cradle and still no audio output. This is the second unit that has done this.


A IC has become unsoldered because of heating/cooling cycles. Basically, you can reflow (resolder using hot air or infrared) the board or you can buy a new radio.

Mar 18, 2011 | Audiovox SIR-PNP3 SIRIUS Radio Receiver

1 Answer

I need a wiring diagram for installing 2 LT980-2


do you need help just for the power or for the audio or both?

power it is simple
positive goes to the battery but with a fuse in the middle
negative goes to a metal ground point on the car (but not battery)
remote goes to the radio with should have a blue and white cable if radio does not have remote line then use the acc wire from radio

for sound
your amp does two speakers and im guessing you want the back ones amplified
so cut the 4 wires that come from the radio and goes to the back speakers 2 positive and two negative
and connect this to the input the phono terminals on the back (unless your radio has phono terminals for audio out on the back side

then take the output from the amp and run it to the speakers one positive and negative to each speaker

i cant seem to find a wiring diagram for that amplifier but i can give you a more genral diagram
http://www.caraudiohelp.com/how_to_install_a_car_amp/how_to_install_a_car_amp.htm

Jan 05, 2010 | Power Acoustik LT-980/2 Car Audio...

1 Answer

Wirirng diagram


heres a link to audiovox tech services wedsite. its free to sign up and you can access wire info for your truck

techservices.audiovox.com/

Aug 14, 2009 | Car Audio & Video

1 Answer

Need full radio wiring diagram for 93 geo prizm


Hello cr1ms0nchaos,

Here is a link to the12volt.com website page that has the wiring color codes for a '93 Geo Prizm.

http://www.the12volt.com/installbay/stereodetail/961.html

I don't know if this is the diagram you followed or not, but I've never had any problem with their information. If you are using an aftermarket wiring harness, make sure that the function of each wire coming from your receiver matches up with the correct color for the stock radio.

Of course it could be that you have the wiring correct and just have a defective unit.

Hope this helps.

Aug 06, 2009 | Car Audio & Video

1 Answer

Audiovox radios wiring schematic for harley davidson motorcyc


Hi Shorty122772, for more information on your question please contact the folks at Audiovox and good luck:

Feb 24, 2009 | 2005 Harley Davidson FXST - FXSTI Softail...

1 Answer

Kenwood ks-122 in-dash car stereo/cd changer


For your Jetta, you may need a different wiring harness.

You need to be able to trace the wiring from the two dins on the back of the Kenwood receiver, and une the wiring diagram for the 1996 Jetta.

Perform your cross reference here for the receiver wiring:
http://www.justkenwood.co.uk/editorial/inst_rec.asp

Here's the wiring for your Jetta:
http://www.modifiedlife.com/1996-volkswagen-jetta-car-radio-stereo-wiring-diagram/

From the jetta wiring, it looks like your Right Front speaker isn't connected.

Here's the wiring for your Delta 88:
http://www.the12volt.com/installbay/stereodetail/1724.html

Happy hunting!

May 19, 2008 | Pioneer DEH-P47DH CD Player

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

818 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audiovox Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4834 Answers

Jaime Hernandez

Level 3 Expert

2315 Answers

yadayada
yadayada

Level 3 Expert

74902 Answers

Are you an Audiovox Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...