Question about Casio Cassiopeia BE-300 Pocket PC

1 Answer

Casaio be-300 pda

Hi, I have brought the be-300 second hand and when I turned it on I found it needed a password. I have tried to cotact the person I brought it from for the password but have had no luck. What can I do?.

Posted by on

  • qwerty mad May 26, 2008

    try to reset the factory defaults using the computer or a cf card. its in the manual page 39.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

A Factory Restore will fix the password but you need to do a hard reset to get to the restore screen. Press and hold the power button. At the same time, press the reset button on the left side of the device with the stylus (pen). You will see a blue sroll saying Initializing. Press and hold the OK button. Once the scroll is finished, you will get the Safe Mode Screen. From there, press the OK button and follow the instruction until you get to the Restore Screen. From there, you can do a factory restore if you have the original CD or have the factory restore BIN file. Everything is available at www.be300.org

By the way, there are also newer operating environments available for the BE300. They will turn it into an almost fully functional Pocket PC will fully functional Today Screen.

Posted on Dec 02, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi i have brought a second hand car, which was fitted with an Alpine cda9830r stereo, but no user manual, i have found one for a cda9830 stereo, is there a lot of difference in the two, as i have amps,...


Hi stephen my names Josh. Its great you could find a second hand manual for the cda9830 and theres not any difference your manual will tell you need to know about the cda9830r as well. Your amp hook up will be very standard speakers and sub will match very well with the that alpine in your car.

Mar 05, 2010 | Alpine CDA-9830 CD Player

1 Answer

No recovery disc - help with restore please?!


Hi Darren have a go with this one it may just work depending how mallicious the attack was .

windows default administrator account password is blank by default.

boot windows in sfae mode by pressing f5 key after theaventscreen has gone off when windows brings up the log in page use the administrator account and no password if this does not work and your laptop wont boot from cdrom then you will need to get a techie to open up the laptop and reset your bios so that it loses the bios password and then you can change the boot order so that you can booot from the cd rom drive

I Hope this was helpfull
Regards Aaan (Alastech

May 10, 2009 | Computers & Internet

1 Answer

USER PASSWORD PROBLEM


contact the person you bought it from only they would know the password hope this helps regards Jim

Apr 30, 2009 | Dell Inspiron 2200 Notebook

3 Answers

Be-300


The password is an easy thing to get rid of. The problem is, a full factory restore is required. First do a hard reset and then restore the BE300 to factory defaults. The password will be reset.

Hard Reset: Press and hold the Power Button. At the same time, press the rest button on the left side of the device with the stylus (pen). You will see a blue scroll saying Initializing. Press and hold the OK button. Once the Initializing is done, the BE300 will go into the Safe Mode screen. Press OK and follow the instructions to the Restore Screen. From here, you can perform a Factory Restore but you need the original CD or a download of the Factory Restore BIN file.

For full BE-300 support, go to www.be300.org It's dedicated to the BE300 and everything you will need is there.

May 19, 2008 | Casio Cassiopeia BE-300 Pocket PC

1 Answer

Garmin NUVI 300. Unit keeps powering off. Battery life seems to have shortened. Satnav approx 18 months old.


help please
i cant get into my second hand garman 300 sat nav to to a unknown pin number ,ive brought it second hand at a car boot market and didnt realise that it was blocked until i got it home and charged it up
can you please advice me on how to get it unblocked or wot i can do
paul

May 04, 2008 | Garmin GPS

3 Answers

Tomtom go 300


The tomtom GO 300 does not need an installation disk. It has firmware ( thats a sort of pre-installed software ) that is put on it at the tomtom factory. If the firmware has become corrupted it can be reinstalled or "updated" by logging on here > http://www.tomtom.com/plus/service.php?ID=17 then click the DOWNLOAD TOMTOM HOME Link. Then connect your tomtom to your computer with a USB lead. Run the TomTom-Home software you downloaded and select "UPDATE MY PRODUCT" . After that , if you don't already have one you will need a valid SD card for your tomtom containing the maps for your country and some other activation codes which you get when you purchase maps from tomtom.

Jan 25, 2008 | Tomtom GO 300 GPS Receiver

Not finding what you are looking for?
Casio Cassiopeia BE-300 Pocket PC Logo

455 people viewed this question

Ask a Question

Usually answered in minutes!

Top Casio Computers & Internet Experts

k24674

Level 3 Expert

8068 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

jackcity
jackcity

Level 1 Expert

34 Answers

Are you a Casio Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...