Question about D-Link AirPlus DI-524 Wireless Router

2 Answers

Router's IP address

In the manual, I am told to enter this http://192.168.0.1/ after I have completed a few steps. It does not load for me and I always get an error page. What can I do?

Posted by on

  • Karen Tao May 24, 2008

    I did what you said and this is what I got.



    Connection-specific DNS Suffix . : nsw.optushome.com.au
    IP Address. . . . . . . . . . . . : 220.239.63.229
    Subnet Mask . . . . . . . . . . . : 255.255.240.0
    Default Gateway . . . . . . . . . : 220.239.48.1

  • Karen Tao May 27, 2008

    I know that you don't need a connection to the internet to get there because you are connecting to your router through that, but I still don't know why I can't get in.

×

2 Answers

I have the same problem. I do not seem to have an internet connection when I go through the DI524.

Posted on May 27, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 242 Answers

Do you have a connection in the first place?
Doesn't matter if you connect wired or wireless.

Then run Start - Run
type cmd en press OK
you get a black command prompt
type ipconfig and press enter
you should have an ip-address starting with 192.168.0
if that's correct, check the default gateway. It should be the ip-address from the manual. Anyway, the address listed here is the address you need. Type this address in your web browser and you should get to the router configuration pages.

If you encounter any problems, please post them here.
I'll help you further then...

Posted on May 24, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

How to change password


Cisco Linksys E1000 Wireless-N Router Router Default

Cisco Linksys E1000 Wireless-N Router Default IP:

192.168.1.1

Cisco Linksys E1000 Wireless-N Router Default Password:

admin

Cisco Linksys E1000 Wireless-N Router Default Username:

linksys

Nov 30, 2013 | Cisco Linksys Wirelessn Router Black...

2 Answers

How to change admin username & password on cisco 2911 router


agree that turn off your modem first before trying to open the router's setup page. By default, there's no username and the password is admin on Cisco 2911

http://www.3anetwork.com/cisco-cisco2911/k9-price_p238.html

Nov 04, 2011 | Cisco 2911 Router

2 Answers

Need password to my cisco wireless router


For that press RESET button of your router for 10 seconds then it will automatic restart and reset. then connect router to computer lan port with lan cable. then you can access it with default ip addresshttp;//192.168.1.1 or http://192.168.1.2 Type user as 'admin" and password as "admin" or "1234" or "password" or blank then you can see configuration page of router. Then click on wireless->security then note down the password.It's your password to connect wireless.
Let me know if you need further assistance. thanks for using fixYa.

Oct 17, 2011 | Cisco Linksys E1000 WirelessN Broadband...

2 Answers

How do i find the ip address and gateway?


Hi Friend,

Please follow the steps:

1. Click Start> Run> type cmd and hit enter (a black box will open)
2. type ipconfig/all and hit enter

You will see few numbers are written alongside IPv4 and Default gateway.

Regards
Chiranjeet

Sep 22, 2010 | Linksys Wireless-G Broadband Router

1 Answer

Wireless conections


Try the http://192.168.1.1 to access the router config page (needs Ethernet cable to be connected to the Router)
If config page still does not appear, then check your Internet Explorer settings> Security Level (not set to custom) If it is, then choose RESET ALL ZONES TO DEFAULT LEVEL and then try this address again. It worked for me.

Dec 26, 2007 | Zyxel Prestige 660HW Wireless Router...

1 Answer

IP Address


Step 1 Open your web browser and type the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter. Step 2 The default username is admin and the password is blank (nothing). Click OK. Step 3 Click on the Home tab then click LAN to the left. Step 4 Next to IP Address enter the new IP address. Next to Subnet Mask enter the correct subnet mask for the IP address entered. Enter a Local Domain Name if applicable. Step 5 Click Apply and then click Continue to save the settings.

Feb 16, 2006 | D-Link Air Xpert DI-774 Wireless Router

1 Answer

IP Address


Step 1 Open your web browser and type the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter. Step 2 The default username is admin and the password is blank (nothing). Click OK. Step 3 Click on the Home tab then click LAN to the left. Step 4 Next to IP Address enter the new IP address. Next to Subnet Mask enter the correct subnet mask for the IP address entered. Enter a Local Domain Name if applicable. Step 5 Click Apply and then click Continue to save the settings.

Feb 16, 2006 | D-Link Air Xpert DI-774 (DWL-774) Wireless...

2 Answers

Configure DMZ Host


enter username admin and password blank (nothing), i got 401 Unauthorized messege 3 times reset the routher DI-524

Feb 16, 2006 | D-Link DI-704P Router

1 Answer

IP Address


Step 1 Open your web browser and type the IP address of the wireless router in the address bar (default is 192.168.0.1). Press Enter. Step 2 The default username is admin and the password is blank (nothing). Click OK. Step 3 Click on the Home tab then click LAN to the left. Step 4 Next to IP Address enter the new IP address. Next to Subnet Mask enter the correct subnet mask for the IP address entered. Enter a Local Domain Name if applicable. Step 5 Click Apply and then click Continue to save the settings.

Feb 16, 2006 | D-Link Express EtherNetwork DI-604 Router

Not finding what you are looking for?
D-Link AirPlus DI-524 Wireless Router Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top D-Link Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2259 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18333 Answers

Mike

Level 3 Expert

4332 Answers

Are you a D-Link Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...