Question about HP ProCurve MSM422 WW (J9359A) Pre-802.11n Wireless Access Point

1 Answer

The MSM 422 Access Point is not booting up, just restarting all the time. This is the error message: CPU: Motorola PowerPC 8241/8245 Version: 5.4 BSP version: 1.3 Bootcode version: 3.0.6 Creation date: Apr 13 2005, 10:11:43 BOOT LINE being initialized, please wait! FLASHDRV_DataWrite:ERROR: Program-buffer-to-Flash command failed Press specific key to stop auto-boot... 1 auto-booting... bootLoad: Entering... boot device : fs: unit number : 0 processor number : 0 file name : /fl/dflt-img.bin flags (f) : 0x0 Auto Flash-Detect : 4M Product Name Detect: Flash Mode (0) bootLoad: Found file /fl/dflt-img.bin! bootLoad: Size of file is 1109249 Successfully inflated file Starting at 0x20000...

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 378 Answers

I think you need to get the latest firmware and load it. You should be able to stop the bootup as soon as you power it on.
HP Support can be reached at 1-866-my-procurve. Their support group should be able to help out.

Posted on Apr 25, 2011

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 Buick Lucerne, power driver seat won't adjust on seat or through memory button. Passenger seat works fine. Heater for both seats won't turn on. Checked fuses and relays, all ok


Your best bet , have it checked for DTC'S - diagnostic trouble codes first ! Electronic control modules involved ! Can't check with a OBD 2 code reader , need advanced scan tool . No codes , check B+ voltage and ground to the module .
Power Seat Inoperative (With Memory A45)
Memory Seat Feature Inoperative
Circuit/System Description
Battery voltage is supplied at all times to the memory seat module (MSM) from the MDL-MEM 10A fuse located in the rear fuse block. This voltage is used by the MSM for logic power and to supply battery reference voltage to the seat and lumbar adjuster switches. Battery positive voltage is also supplied at all times to the MSM from the PWR SEAT 25A circuit breaker. This voltage is connected to a power rail internal to the MSM and is used to drive the power seat motors, lumbar motors, and seat heater elements on vehicles equipped with heated seats. Each seat and lumbar adjuster motor is controlled by the MSM through 2 motor control circuits. The MSM connects all motor control circuits on the power rail to a common reference point whenever they are not in operation. This reference point is biased to approximately 2.5 volts. The MSM checks to see if the reference voltage is shorted to ground or battery before enabling any of the seat or lumbar motors.

Circuit/System Description
Reference voltage is supplied to the memory switch from the driver door module (DDM). When a memory switch is pressed, reference voltage is applied through the switch contacts, a series of resistors and thorough the memory switch signal circuit to the DDM. The door module then sends a serial data message to the memory seat module (MSM) indicating the memory recall request. The MSM then commands the appropriate seat motors to move to the pre-recorded seat positions stored in memory in response to the switch input.

Sep 02, 2017 | 2009 Buick Lucerne

1 Answer

I'm trying to install a Lexmark X5150 printer but I'm getting an error message.


Your Mac is an Intel-based computer (see About this Mac in Apple menu), but the software to setup the printer was produced a long time ago for Macs that had PowerPC processors. Apple hasn't support PowerPC Macs since OS X 10.4 (Tiger). If you really need supporting utilities for the printer, search for "Lexmark X5100 for Intel Mac" on the web.

Feb 09, 2015 | Computers & Internet

1 Answer

Screen Message: Boot Loader....OK to Program USB


hold * and # and Power On when the phone is off..do this two times if first time not solves the problem. If you still have the problem it means the soft is broken and must be implemented again

Oct 29, 2009 | Motorola Mobility RAZR V3i Cellular Phone

1 Answer

Connection error


This is because of the improper configuration of the access point. so you make a request the service provider to send the settings and store the same in the phone then restart it to get the things done

Jul 22, 2009 | Motorola Mobility W230 Phone US with...

1 Answer

Please guide meto restart the phone how to reboot "bootloader version"


u cant do it by ur own, u need to go to motorola service center to get it a software update

Jun 03, 2009 | Cell Phones

3 Answers

1801 Microcode Patch Error


I bought a Compaq Computer, 2.0Ghz, 256MB, 20GB for my College project. When i put the power on, it restarts almost immediately (so many times repeatedly). Then after such reboots, it successfully brings a message "1801 - Microcode Patch Error" and a F1-Boot directive.

Mar 20, 2008 | Compaq Evo D500 PC Desktop

Not finding what you are looking for?
HP ProCurve MSM422 WW (J9359A) Pre-802.11n Wireless Access Point Logo

700 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18424 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

pontelemon
pontelemon

Level 3 Expert

538 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...