Question about Motorola Mobility MOTOKRZR K1 Cellular Phone
My Motorola KRZR k1 works fine but the front housing/facia is badly scratched and I would like to replace it. Could you please advise me how to do this.
CHECK OUT THIS LINK http://www.formymobile.co.uk/Dismantle/k1disassembly.htm
Posted on Apr 30, 2009
If you have a torx 5 screwdriver, you could. gently run your fingers thru the side of the facia, be careful not to break the lock near the camera area. then unscrew the four torx 5 screws you see beneath it. remove the facia then replace it with a new one.
Posted on May 27, 2008
Tips for a great answer:
Aug 12, 2014 | Motorola Mobility KRZR K1 Cellular Phone
May 20, 2014 | Motorola Mobility KRZR K1 Cellular Phone
1 - Switch ON your Motorola KRZR K1 with a NOT ACCEPTED SIM Card,
2 - Phone will display "Enter Special Code",
3 - You can now enter the Unlock Code.
NOT ACCEPTED: We mean, to use a sim card from a network other than the network your Motorola KRZR K1 is locked to.
WARNING: If one of theses messages appear :
- "Contact Service Provider"
- "Tampert Alter"
- "Wait before enter special Code"
- "Contact Service'
It's because you or somebody already entered too many wrong codes, you just have to leave the Motorola KRZR K1 ON with the errors message and after 40 minutes to 2 hours the message "Enter Code Special" will appear again!
Nov 03, 2012 | Motorola Cell Phones
Apr 06, 2012 | Motorola Cell Phones
Oct 29, 2010 | Motorola Mobility KRZR K1 Cellular Phone
Sep 13, 2010 | Motorola Mobility KRZR K1m Cellular Phone
Jan 27, 2008 | Motorola Mobility MOTOKRZR K1 Cellular...
1,255 people viewed this question
Usually answered in minutes!