Question about Zenith Z50PX2D 50 in. Plasma HDTV

1 Answer

My tv lost the picture but the sound was working. i then turned the tv off then on. nothing happened. the red light flashes to green then to red with no clicks and or no sounds. i wasnt in the room at the time of the detonation... so no "pops" were heard. 3 yrs. ago i heard a "pop"! circuit city came and fixed it under warranty.

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

I had the "pop" happen to me about a month ago. Sounds like the same symptoms as you list. I searched online to find the most common fix to the the Y Sustain board. You can find this part online for about $150. I have used rivervalleyelectronics.net. Ultimately, I chose not to fix my tv and bought a new one. Before trashing the TV I removed all the boards and have them available for sale if you are interested. I will sell all the boards, including speakers and cooling fans for $150 plus shipping. Contact me if interested.

Posted on Oct 07, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

No picture and blinking red light on Panasonic Viera Plasma TV model P50XT70A


Your Viera is showing symptoms of internal power supply failure

Mar 19, 2013 | Televison & Video

1 Answer

Turn tv on. green light solid display, no picture or sound


The flashing green light is likely indicative of a self-test failure, indicating the TV has detected some sort of internal fault. With no picture or sound, one strong suspect is the power supply. Flat-panel TV's have an internal DC power supply that converts the inbound AC current, and when these fail, or are unable to supply a minimum level of power to the set, it can behave as you describe, providing only enough power for the green light to illuminate.

Jul 28, 2012 | LG 50PG60UD 50 in. HD-Ready Plasma TV

1 Answer

Hi i have an isis tv and have lost the manual to it. I can not get the tv to switch on, every time i turn the power on and try and use the remote to turn it on nothing happens and the led red light on the...


Hi can anyone please help me a have a isis tv only a year old was working fine last night aye want to put it on tonight and the red light flashes for a bit than comes on but no sound or picture what could it be the scream is just dark

Sep 13, 2011 | Televison & Video

1 Answer

Flashing red light saying lamp and no picture.


REPLACE LAMP !!!
Buy an Orginal Replacement Lamp.

May 19, 2010 | Sony Grand WEGA KDF-50WE655 50" Rear...

1 Answer

Vizio P50HDM No Picture/No Sound


replace the sustainer boards should correct this problem. New sustainer boards may cause red and green pixilation. If this happen, replace control board and TV is as good as new.

Apr 05, 2009 | Vizio P50HDTV10A 50 in. Plasma HDTV

1 Answer

No power


Replace Convergence IC's STK392-110 and any burnt resistors
& check fuses F851,852,853,etc.........................T

Aug 11, 2008 | Toshiba 42H81 42" Rear Projection...

3 Answers

Tv wont turn on


TV STARTS UP AND GOES BLANK SOUND NO PICTURE

May 16, 2008 | Philips 32PF5321 32 in. HD-Ready LCD...

5 Answers

Sony Trinitron blank tv/no picture


When I turn on the TV I hear the click sound and the TV powers up. Immediatly the red (standby) light begins to flash 6 times on and off. this happenes only in the morning, but after 5:00PM when youturn on the TV as if nothing is wrong.

what is the problem?

Feb 08, 2008 | Sony FD Trinitron WEGA KV-32HS510 32" TV

Not finding what you are looking for?
Zenith Z50PX2D 50 in. Plasma HDTV Logo

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Zenith Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73591 Answers

matt martin
matt martin

Level 3 Expert

1208 Answers

Computer Repairing
Computer Repairing

Level 3 Expert

14641 Answers

Are you a Zenith Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...