Question about NetGear RangeMax WPN824 Wireless Router (WPN824NAR)

1 Answer

Netgear wpn311 adapter

Software wont work on vista. Have the latest download.Device manager says code 1

Posted by on

  • dazza-titan Jun 17, 2008

    done that even reformatt .have done a bios flash it still wont load anything i put in pci slot????

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

Uninstalled the drivers from the computer.

unplug the adapter and restart the computer.

now install the driver which you download from the website.

i have send u the link where u can find the driver for this adapter that works with vista. use this driver.

http://kbserver.netgear.com/release_notes/d103109.asp

after installed the driver, restart the computer.

once the computer get restarted, plug in the adapter. and run the "new found hard ware wizard".

Posted on Jun 13, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Netgear models wnda4100 need drivers


[PDF]N900 Wireless Dual Band USB Adapter WNDA4100 - Netgear

www.downloads.netgear.com/.../WNDA4100/WNDA4100_UM_25APR...
Reinstall the WNDA4100 software, if necessary. ... If the network uses wireless security, you need to either know the wireless security settings .... Note: The country code selection is for non-US models only and is not available to all US models.

Netgear WNDA4100 Drivers Download - Update ... - Solvusoft

www.solvusoft.com/en/update/drivers/.../netgear/wnda4100/sub-models/
Download the latest Netgear WNDA4100 device drivers (Official and Certified). Netgear WNDA4100 ... Top 3 Similar Drivers to Netgear WNDA4100 (56 Models) ...

How to Get NETGEAR Network WNDA4100 Drivers for ..


Nov 30, 2015 | NetGear Computers & Internet

1 Answer

My Netgear WG111v3 adaptor was working yesterday but now my pc does not recognise it and it says that it has malfunctioned. i have reinstalled all software and also installed the latest software from...


Make sure you have downloaded and extracted the correct driver for your OS have a read here http://kb.netgear.com/app/answers/detail/a_id/12962 about halfway down the page is an orange icon to download the file
I would remove the wireless adapter from the device manager Press the Windows key (bottom left of the keyboard} and at the same time press the R key, now in the search box that appears - type devmgmt.msc this brings up device manager, look for the network adapters and click onthe + sign Is you network adapter listed or does it have a X or ! or ? against it If listed I would right click onit and uninstall. ---- Now reboot the PC - it will detect new hardware, and start to install the wireless adapter, it should now automatically find the driver as you have already installed the driver software. But if it does not then when asked browse to the extraction files you created from the website If you have a ? against the device its looking for the device driver - right click and install and then browse to the files you extracted

Mar 20, 2010 | 2wire Computers & Internet

1 Answer

Toshiba satellite wont connect to internet. Wireless network adapter showing vista error code 31. Any ideas


Try removing the wireless adapter in the device manager and then re-boot computer. Vista should detect the adapter and re-install the drivers. if that does not work you might want to download the latest drivers and software from Toshiba and install them. Another thing you can try is to use windows restore to return the computer to a time when the wirless adapter was working.

Sep 24, 2009 | Computers & Internet

1 Answer

After install of driver into windows, xp doesnt


Hi, please check the status of the adapter using the steps below:

1. Click Start and go to 'control panel'.
2. Double click on 'system'.
3. Click on 'hardware'.
4. Click 'Device manager' button.
5. Under 'Network Adapters' you will find the name of Netgear adapter.

Check if it shows installed properly or shows with an error code.

You may try installing the adapter on another machine to isolate the issue further.

I hope this information allows you to resolve this issue.

If I have helped you, please help me, and rate this suggestion the highest FixYa rating. If you cannot rate this post with the highest rating, then please comment to this post and I will try to help you further.

Jul 02, 2009 | NetGear : WG111 54 Mbps Wireless USB 2.0...

1 Answer

My wireless adapter lights up steady, but won't connect to the internet


Hi,

Check the adapter in device manager whether it is installed or not.
if it installed properly. then visit Netgear website for latest drivers
http://kb.netgear.com/app/products/list/p3/43

and download it and uninstall the older version and install the latest version.
thn try to connect it wireless with your wireless settings.

and after that if u'll have the same probl please reply..

Aug 27, 2008 | NetGear (IM-WG511T) Wireless Adapter

2 Answers

WG111T


The solution I have is quite simple. I use Vista premium x64 so someone else can test it on Xp but it should work for both. In Vista the 1.3 version doesnt work so Facid's solution doesnt work for me.


[LIST=1]
[*]Get the 2.1 setup for Vista and install it.
[*]Go to your NETGEAR folder wherever you installed it to (Program Files x86 for me) and copy the DRIVERS folder to your desktop.
[*]Uninstall the smartwizard and remove everything in the NETGEAR folder.
[*]Plug in your WG111T.
[*]Go to Device Manager and find your WG111T in the list, Right Click and Update Driver.
[*]Browse to the DRIVERS folder on your desktop when it asks where to look for the driver and the WG111T will install. It should popup with a little message when it is completed but you will not be online yet.

[B]I dont know what you would do in Xp x64 system but I believe it has its own wireless manager like Vista and should be quite simalar.[/B]
[*]IN VISTA go to the Connect To button in your Start menu, It should be under Computer and Network, it should show your router along with a 5 bar network strength graphic.
[*]For me all I had to do was double click on the network and put in my WEP hex key and it conected.
[/LIST]

Gamertag: NeoNMD

Nov 04, 2007 | NetGear WG111T 802.11g/b (E82321) Wireless...

2 Answers

Application won't start up (VIsta)


if you managed to get the driver installed, you should get an option to use either windows wireless management or the software that came with the adapter, you may be able to dissable the cards software and use windows own

Sep 09, 2007 | D-Link AirPlus G DWL-G510 802.11g/b...

1 Answer

Computer Crashes When using this Netgear device


Try downloading the latest drivers for this device and install. See the website below. http://kbserver.netgear.com/products/WPN311.asp

Apr 20, 2007 | NetGear WG311T 802.11g/b Wireless Adapter

Not finding what you are looking for?
NetGear RangeMax  WPN824 Wireless Router (WPN824NAR) Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18377 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...