Question about Computers & Internet

1 Answer

My Dad and I are trying to figure out the username and password for our router's site, other websites say it should be admin but that does not work.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 27,725 Answers

  1. hope this helps
  2. Log in to your NETGEAR router by browsing to http://www.routerlogin.net or http://www.routerlogin.com. Enter the username (admin) and password. By default, the password is password or 1234 unless it has already been changed.
  3. From the left-hand navigation menu of the Router Manager, select Set Up > Wireless Settings.

3. From the center screen, select your encryption type from under the Security Options heading.

    • If the wireless network passphrase is visible, review it and use it to log devices onto your network.
    • If it is not visible, you can change your wireless passphrase; however, changing the passphrase will cause you to lose your wireless connection. Connect your computer to the router with an Ethernet cable before entering a new passphrase into the text box and clicking Apply.
If you cannot log into your router:

Unfortunately, there is no way to recover a lost or forgotten password from a router or access point; you will need to reset the device to factory defaults. However, once the device is reset to factory defaults, you can use the default username ("admin") and password (either "password" or "1234" depending on your router) to reconfigure your router settings.

NOTE: Restoring factory defaults on a device will erase any customizations you have made. You will lose any configurations saved to the device!

See the following articles for more information:



Posted on Sep 27, 2010

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windows security center


If this is your router and you've forgotten the username or password we suggest that the router be reset and then setup with a new username and password.
Default username and password
Before doing a hard reset on the router you may want to try the default username and password. While this is not the same for all routers, this may allow you access to your router.
Username: Admin or Administrator
Password: <Blank>, try just pressing enter or try "admin" as the password as well.
If this does not work and you believe the router is using the default username and passwords try viewing the default settings at routerpasswords.com
Sometimes when attempting to visit a secure website on your Windows computer, you will receive a message about a security certificate error.
You will have the option of whether to continue to the site.
Secure websites, such as an online bank or retail store, use security certificates so your browser knows that any financial or personal information you enter on the website will go the correct place securely.
Every error message does not necessarily indicate a security problem on the website.

Check your computer's date and time.
If they are incorrect, you will receive security certificate errors.
Click on the time in your taskbar, and set the correct time in the pop-up window.
Refresh the website where you received the error message.
If you receive a security certificate error message again, the problem lies with the website's security certificate.
Click the icon that looks like a padlock next to your browser's address bar.

Read the information in the window.
This will detail who owns the website, the site's verification status and any known information about the website's trustworthiness.
Compare this to what you know about the site you were attempting to visit.

Click "View Certificates, then "Install Certificates."
Click "Yes" at the security warning to install the certificate for the website.

May 20, 2013 | Linksys WRT Computers & Internet

1 Answer

This router was previously used by my sister-in-law in manila...then i brought this router in japan...when i want to install it in my computer i cant access on the site that written in the...


Reset your router back to it's factory settings by holding the reset button for about 5 seconds. I have provided a list of the most popular router brands. If it does not work you may need to google what your specific model's default IP address/default username/default passwords are, for example search for "Encore ENHWI-2AN3 default IP address" The default login info can change, it can depend on where you obtained your router. If you purchased it yourself from a store then the standard defaults should work. If you obtained your router from your Internet Provider you may need to contact your service provider. It also may depend whether it's an old or new model router as well. And you may need to press and hold the reset button on your router several times before it actually clears. Make sure you have a wired connection then once you have accessed your
router simply run the Setup Wizard. Set your SSID as something you'll remember like "Mavericks Network" and your Password can be something like your phone number for example 3109876543

Belkin - Username: Leave the field blank Password: Leave the field blank Default IP address is: 192.168.2.1

Buffalo - Username: root Password: Leave the field blank Default IP address is: 192.168.11.1

D-Link - Username: admin Password: Leave the field blank Default IP address is: 192.168.0.1

Encore - Username: admin Password: admin Default IP address 192.168.1.1

Linksys - Username: admin Password: admin Default IP address 192.168.1.1

NetGear - Username: admin Password: password Default IP address will be: 192.168.0.1 or 192.168.1.1

TP-Link - Username: admin Password: admin Default IP address 192.168.1.1

TrendNet - Username: admin Password: admin Default IP address 192.168.10.1

Zhone - Username: admin Password: admin Default IP address 192.168.1.1

Zyxel - Username: admin Password: 1234 Default IP address 192.168.10.1

Sep 08, 2011 | Computers & Internet

1 Answer

Netgear router try to connect but saying validating identity wat can i do


Reset your router back to it's factory settings by holding the reset button for about 5 seconds. I have provided a list of the most popular router brands. If it does not work you may need to google what your specific model's default IP address/default username/default passwords are, for example search for "Encore ENHWI-2AN3 default IP address" The default login info can change, it can depend on where you obtained your router. If you purchased it yourself from a store then the standard defaults should work. If you obtained your router from your Internet Provider you may need to contact your service provider. It also may depend whether it's an old or new model router as well. And you may need to press and hold the reset button on your router several times before it actually clears. Make sure you have a wired connection then once you have accessed your router simply run the Setup Wizard. Set your SSID as something you'll remember like "Mavericks Network" and your Password can be something like your phone number for example 3109876543

Belkin - Username: Leave the field blank Password: Leave the field blank Default IP address is: 192.168.2.1

Buffalo - Username: root Password: Leave the field blank Default IP address is: 192.168.11.1

D-Link - Username: admin Password: Leave the field blank Default IP address is: 192.168.0.1

Encore - Username: admin Password: admin Default IP address 192.168.1.1

Linksys - Username: admin Password: admin Default IP address 192.168.1.1

NetGear - Username: admin Password: password Default IP address will be: 192.168.0.1 or 192.168.1.1

TP-Link - Username: admin Password: admin Default IP address 192.168.1.1

TrendNet - Username: admin Password: admin Default IP address 192.168.10.1

Zhone - Username: admin Password: admin Default IP address 192.168.1.1

Zyxel - Username: admin Password: 1234 Default IP address 192.168.10.1

Sep 07, 2011 | NetGear RangeMax WPN824 Router

3 Answers

What would username and password on login setup for Linksya wireless router?


factory default password and username
User: leave it in blank Password: admin
or
User: admin Password: admin

Mar 14, 2011 | Computers & Internet

1 Answer

My dad blocked facebook because i spend to much time on it. i have tryed so many proxies but some are confusing :( graph.ws kind of works but not really because it only comes up with the top part i was...


Your dad probably blocked it through the router. Try logging into your router with either 192.168.1.1 or 192.168.0.1
username: admin
password: if it's default, it will be blank.

Mar 09, 2011 | Computers & Internet

2 Answers

Hi guys, i just got a thomson twg870 and i'm trying to connect to 192.168.0.1 but i can't find the username and password. I tryed with admin and "password" but it's not working. Any ideas? Thanks


pankystu,

The default username and password for most routers is:
username- admin
password- admin

OR

username- administrator
password-

Hope this helps.

-S

Oct 19, 2010 | Computers & Internet

1 Answer

Do not know username and password.


You will need to reset the router - stick a pin in the back where the reset button is and hold it in there for 10+ seconds while power is on. This will set it to the default for that model router - you can check Linksys site for the manual to get the default username and password.

May 10, 2010 | Linksys Wireless-G Broadband Router

3 Answers

How do i find my password for my router


normally, i wouild expect the password to be 'admin' without the quotes.

Oct 14, 2009 | D-Link DIR-625 (790069292637) Wireless...

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

598 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...